Aquarium model 7 - Testing Water Cool Chiller fish tank with Chip-Peltier-TEC 12710
Vložit
- čas přidán 13. 09. 2024
- How to make an Cubic 30 aquarium tank
• Aquarium model 6 - How...
How to make a led light aquarium
• Aquarium model 5 - How...
How to make Co2 for aquarium
• Aquarium model 4 - How...
How to make Filter outside the aquarium
• Aquarium model 3 - How...
How to make an aquarium tank
• Aquarium model 2 - How...
Make an aquarium with black glue
• Aquarium model 1 - How...
make Water Cool Chiller fish tank with 3 Chip-Peltier-TEC12706 60w
• Aquarium model 8 - Mak...
Make a water chiller for the aquarium at a cheap and simple cost
• Aquarium model 9 - Che...
Today I received a gift from a friend
My friend's request is to make a water cooler for the aquarium
I will try and see the results of the test
Note that it is not a substitute for genuine water chiller (Chiller).
Here I have
Peltier TEC1-12710 40x40mm - C7
An air radiator and radiator fan
Clip is only entertaining
Have a nice day
If you like my Clip, give me 1 Like and 1 Subscribe
If my Clip is not good, please help me by leaving a comment below
I will try to do better
Thank you very much
In the next clips I will share different Aquarium models and Filtering system and how to do it. See more clips on aquariums below the description
- XH-W1209 Temperature Sensor and Controller
P0: Hot or cool
P1: Temperature range of operation
P2: The maximum value is adjustable
P3: The smallest value is adjustable
P4: Adjust the error of temperature
P5: P6: ...
In order to cool water we will need more chip-peltier
In the next Clip I will test the water chiller with 3 chip-peltier tec12706
Same water radiator
• Aquarium model 8 - Mak...
Clip is only entertaining
Have a nice day
If you like my Clip, give me 1 Like and 1 Subscribe
If my Clip is not good, please help me by leaving a comment below
I will try to do better
Thank you very much
-- don't drink and drive --
instead of trying to cool such a huge space with such a mini fan, you could try attaching the peltier unit direct to a Watercooling Block for watercooled CPUs, in that way instead of air-cooling the SS pipes that you made, you are actually directly cooling the water by passing it through the CPU waterblock. Waterblock for CPUs/GPUs comes in a variety of sizes and are not particularly expensive. Hope that helps!
great i like honesty u can put ice even to show pass but u did not fool us
Thank you very much for encouraging me
I just want to share with everyone about experiments
Thank you very much
Wish you a happy day my friend
Excellent video on DIY your own aquarium chillers
Thank you very much
Wish you have a happy day My Friend
New king of diy
Thank you very much
Have a nice day My Friend
Like!.ông bạn giỏi quá.
Cảm ơn bạn nhiều nhá
Ung hộ kênh giúp mình nhé
it might not reach your target on 24°, but its definitely working cooling system with only using 1 peltier. appreciate 🙏
thx for the video.
Very nice video friend good 👍
Don't give up
Better luck for next time
Make aquarium chiller better 😊😊😄😄
Thank you very much
Have a nice day my friend
Hình như bác là người Việt nam
đúng rồi nhìn là biết mà :))
i think you are amazing great work
Thank you very much
Have a nice day My Friend
bác người Việt Nam ạ, xem clip mà mê quá :D
Cảm ơn bạn nhiều nhé
Piece of Paper bạn có thể cho xin link hoặc tên các bộ phận không ạ =]]
So nice bhai
Thank you very much
Have a nice day My Frined
It was great idea
Thank you very much
Have a nice day My Friend
Amazing Bro.Lots of hard work and application.Keep it up.
Great effort, sorry the test failed. But i dont think exact 24 degress is required. 25 is also good. You could try using increasing the metal pipes inside.
Thank you very much for encouraging me
I just want to share with everyone the experiment
Perhaps if we want to cool this way, we have to increase the amount of CHITEC
Have a nice day My Friend
I like your videos. I wanted to ask you to make more videos and projects on how to cool the peltier aquariums, since here where I live in the Amazon is hot and humid. I live in Porto Velho in the state of Rondônia, and I have difficulty keeping fish and plants in a non-tropical climate because of the temperature. I think Vietnam is hot too. Thanks for your videos. Hugs from your Brazilian friend.
Nice review and good work....dont forget bio ball needed for bacteri 👍👍👏👏
Thank you very much
Have a nice day My FRIEND
Anh ở đâu ạ em rất thích những video như thế này clip nào em cũng coi cả
Cảm ơn bạn nhiều nhé
Mình ở NB
A great try... actually the peltiers are not efficient in pumping heat out of aquarium as itbis an open system...they work great for closed systems like the refrigerator...maybe you can show us how to make s chiller using a refrigerator compressor..this is a very well needed video topic but none has ever demonstrated this in CZcams. Please make one...thank yoy
Thank you very much for your good idea
I also wanted to make a water chiller from a refrigerator but I couldn't find a suitable refrigerator
I will try to implement it in the next Clip
Thank you very much
Wish you a happy day my friend
Yes sure buddy❤️.
Interesting test
great video! like following the channel
Thank you very much
Have a nice day My Friend
I apologize for the slow reply because I am in the hospital
Parfait et merci !!! 👍👍👍
Thank you very much @Guy Davriu
It was a failed test
Thank you very much for encouraging me
Wish you and your family always have good luck in life
@@pieceofpaper924 merci beaucoup à vous aussi !!! 👏👏👏
great job. you can try to do the chiller box smaller... the peltier need to cool all the air volume inside the box before cool the water, so was a lot of air there
Thank you very much for encouraging me
I will try to do better
Wish you a happy day my friend
Keren lur vidiomu.. 👍🏿
nice bro good job!!!!!!
Thank you very much @panos darkan
Have a nice day My fRIEND
Bác chơi sò tầm 4, thử 8 con xem phê không ^^
^^ Mình chỉ chế nghịch vậy thôi, chắc mấy nữa mình làm cái lốc tủ lạnh vs cục nóng điều hòa mà chưa có thời gian làm
cảm ơn bạn nhiều nhé
@@pieceofpaper924 sò thì tốn điện phết, bác thử chơi block tủ lạnh đi là ok
Sir can we make canister filter and chiller together...(inlet from aquarium will go to canister filter and outlet from canister filter to chiller inlet and then outlet from chiller to back in aquarium again) will I have to use 2 diffrent submersible pump with the same volt 800/L?
And can we cut and extend the temperature sensor wire because I am planning to hide diy canister filter and chiller under the tank cabin
Using aluminum pipes and removing pump inside chiller due to hot radiation of pump you will success.
Thank you very much for sharing your thoughts with me and everyone
I will try to do better
I originally wanted to use Aluminum but I could not find suitable aluminum so I had to use stainless steel instead.
Aluminum conductors are much better
Thank you very much
Please share your good ideas with me
Wish you a happy day my friend
bro...that was so cool. you are very talented. can you make a customized chiller for me..i would love it.
Thank you very much
Happy new year My Friend
@@pieceofpaper924 Happy New Year.
I’m already exhausted 😴
Thank you very much
Have a nice day My Friend
The pump is making heat so you shouldn't have it in the coil chamber box. More cooling for the peltier should improve its efficiency a little and some sort of thermal mass battery in the coil area to pre chill and help stabilise the coil temp.
Goo
Dear friend, did you make an aquarium of fiberglass or plexiglass?
The aquarium I use in Clip is super clear glass
It is not by Meka
I apologize for the late reply
Because I was at the hospital last time
Wish you a happy day my friend
Thanks for the answer. I wish you health and success.@@pieceofpaper924
linh kiện anh mua ở đâu thế ạ
em cũng muốn làm vì hồ em nhiệt độ tận 30 độ chiller mua không có
Cái này mình làm thử nghiệm theo yêu cầu của mọi người thôi
Mình có ghi trong video là thử nghiệm thất bại vì không làm lạnh được như ý muốn. nếu muốn làm lạnh triệt để thì bạn dùng bộ lốc của tủ lạnh nhé. hoặc rẻ thì làm thùng đá cùng cảm biến khống chế nhiệt độ như video khác của mình ấy. Dùng cũng được có điều không được đẹp mắt ^^ . Còn tốt nhất thì vẫn là Chiller
goooood😊
Thank you very much
Have a nice day My Friend
Bro, the Peltier didn't cool the object, it removes the heat. You might get better results whether you improve the heat exchange. Your are using the air to exchange temperature, your "freezer" is working like this:
The Peltier romoves the heat from the aluminum > the aluminum exchange temperature with the box's air > the cooled air exchange temperature with the pipes > than, the pipe exchange temperature with the water.
This process has so much steps. I mean you would get better results make some changes.
How about make the Peltier act directly with the water? Try it making the cool part or Peltier contact directly the water, maybe a aluminum pipe dissipation.
Thank you so much for contributing ideas to me and everyone
Actually I just wanted to do a test of the performance of The Peltier. To answer everyone's questions
And it did not work
Thank you very much
Have a nice day My Friend
@@pieceofpaper924 :D
Peltier is not so efficinet at all, the power consumptiom is high and it didn't cool the necessary. To get really cold temperatures i recommend using a refrigerator's engine. have a nice day too!
genius!
Thank you very much
Have a nice day My Friend
Your DIY is superb but getting the product is difficult .
that led strip light mixing rod
Brother make a aircondisonr using 6 peltier and use car raditior for heat dispatch
Can you teach me how to make that thing?
A có bán không ạ, e thấy a có chiller vs co2 không biết a có kinh doanh sản phẩm này ko ạ
Mình không bạn ạ
Đây là mình làm thí nghiệm theo yêu cầu của mọi người thôi
Nói thật mình thấy đồ chế không rẻ hơn mua đồ xịn mấy đâu mà dùng thì không lâu dài cũng như bất tiện :D
Piece of Paper ok a ^^ thks a nhìu luôn ủng hộ kênh ạ
why did you use a fan on the cold side of the peltier?
I want the cold air to spread better and stir the air evenly in the refrigerator
nice to meet you My Friend
@@pieceofpaper924 ive been trying to cool a 25litres of water down to below ambient temperature. what luck have you had so far?
Why you didnt use capiler tube brass?
1/2 frozen water bottle for better cooling in the aquarium .....
Well that's a good idea
But if we use the temperature control circuit, we can control the temperature at the level we need
This temperature control circuit is very cheap at about $ 1
I apologize for my late reply because I have been in the hospital for the past few days
keo trong clip là keo AB đúng không anh?
Đúng rồi bạn ạ
23:41 When you consider the difference in water temperature after 8 hours, you also have to keep in mind that difference is influenced by change in ambient temperature, which has changed quite a bit due to change in heat radiation from sunlight.
Thank you very much
I just want to test chip-peltier-tec performance and share it with everyone
I realize that a chip-peltier-tec is not working if everyone wants to use it for their aquarium, it may have to use more than Chip.
thank you very much
Have a nice day
W
Có thể cho biết cách mua linh kiện và giá để hoàn thành máy này không bác
Is this water radiator safe for fish? It can oxidise and become harm to fish right?
To be able to keep the temperature at 7C, increase the number of peltiers?
Can we use this tie retailer in a saltwater fish tank?
My friend
This is just an experimental model requested by everyone
That's not a good thing for professional use
For saltwater aquariums and steady use you should use professional products for the best experience
Have a nice day, my friend
Awsome can u make one for me
Thank you very much
Have a nice day My Friend
Could you give me the name of the topic that appears in the 12:14 minute
Good job but u should correct some
yes you ninja
can you share over all the list of material !
Thank you very much
I have specified the name of each material in Clip
Thank you very much
Wish you a happy day my friend
Nice try
Disculpe maestro... cómo se llama ese aparato que saca de la caja blanca dónde escribe 12 v??? Gracias
Can you make this for me ??
pretty bad idea.
Just for information - water conducts heat (cold) much better than air.
The intermediate stage with cooled air container as a heat exchanger is a lot of energy loss.
You should cool water directly with the radiator and the second circuit for the aquarium.
can u provide link to buy stuff
This is just a demo version requested by everyone
If you use it for a long time, you should use specialized equipment
Me and you are not in the same country so I cannot provide you with a product link
Do a search on your local sales websites or amazon
How make a glue?
The fan so noisy
Do not teach canal guests to work with an angle grinder without a protective cover and gloves on their hands. And so sit and envy Your talent.
bhai ak mera leya bana do ya ferr kaha se leya link de do
Sayang saya tidak punya tank 😀
donde compras el termostato?
Which country do you live....??
@Vu Thanh Son India 🇮🇳 🇮🇳 🇮🇳🇮🇳🇮🇳
U dont tell evry item.. for beginer.. realy hard to know that item name ?
I'm sorry but my english is not good
I can't say in my video
I am trying to learn English so I can speak in my video
I wrote in writing in my video
This is just an experiment and it fails
I will try to do better
Thank you very much
Wish you a happy day my friend
Ya.. always try dude..never give up.. succes for u..
Thank you very much
Wish you have a happy day My Friend
I guess it is super inefficient to have coils in a cold environment and expect that the water becomes much colder. There is also too much loss basically everywhere which the Peltier in this inefficient system cannot overcome. I guess if you use a traditional condenser (which has coils) and the (cold) coils are directly in the warmer water, you would have a far better system.
Or.... you had already the more traditional water cooling chambers at the end of the video, which should definitely be far more efficient (as they are in direct contact with the chip - especially with heat paste. You could even put the "traditional heat exchanger" on the hot side and the water heat exchanger on the other...
the cost to buy all your equipment, i believe it's the same when you buy a real chiller
Thank you very much
I just want to share the same experiments
There are also many people wondering about this issue
I just want to do experiments and share it with everyone
It is not a substitute for specialized air conditioning
do you have any idea how much chiller cost?
@@Civilsitis if you mean the high end chiller for salt water tank, yes it is way more expensive than his DIY built.
wonderful but 100w
You just complicated this whole system...see other videoes about this peltier aquarium cooler.
Ben ne yaptığınızı anlamadim
I just tried to do a test at everyone's request
And that test was not successful
that is all
Thank you very much
Have a nice day My Friend
Why the hell make it so complicated
Bad
Learn thermodynamics before attempting this again.
pagal