Video není dostupné.
Omlouváme se.

Ford Ranger Coolant Flush. Ford Everest Coolant Flush. Mazda BT50 Coolant Flush. Detailed Version

Sdílet
Vložit
  • čas přidán 22. 06. 2021
  • Detailed version of a Ford Ranger Coolant Flush, Ford Everest Coolant Flush and Mazda BT50 Coolant Flush.
    For a Fast Version click here: • Fast Version!! Ford R...

Komentáře • 61

  • @cainwilks
    @cainwilks Před rokem +3

    Considering there is 12.9 litres in a bt50 3.2 L manual cooling system, and your only able to drain and replace about 7.5 litres, then you need to allow extra coolant in mix as you said, although for 50% coolant mix equals about 6 litres of concentrate to 1.5 litre of water making 7.5 total. That will then mix with the 5 or so litres in the system making a 50 % ratio of concentrate. Where is that other 5 or so litres, as when i flushed with motor running there was no color of red in the flushed water.

    • @killawattgarage
      @killawattgarage  Před rokem +1

      Great point. Will pin this to the top of the comments.

    • @captainotto
      @captainotto Před 4 měsíci

      I have mine on a forward tilt with ramps under the rear wheels. I can only pull six litres from my ‘17 3.2 wildtrak. And I’ve tried using a blower to push coolant out. Nothing else comes out.

  • @davidbrand3611
    @davidbrand3611 Před 18 dny

    Thanks man. Just did my Ranger. Confident I have done a good job after watching your video.

  • @px50fj81
    @px50fj81 Před 3 lety +1

    Your a legend not many good videos on rangers floating around

  • @simoncampbell5802
    @simoncampbell5802 Před 3 lety

    Appreciate the Ranger uploads as this is my daily driver. Had done the coolant sometime ago due to a leak but appreciate the reference for next time around. Cheers.

  • @turbostyler
    @turbostyler Před 3 lety

    Thanks mate, greatly appreciate your videos. They have served me well with my oil change, transmission fluid change, and also diesel filter change. Will be doing the coolant flush and also diff oils for the next service at 110,000kms.

  • @chandamusonda6883
    @chandamusonda6883 Před 2 lety +1

    Very helpful tutorial. Please keep uploading 🙌🏾

  • @arpeemac
    @arpeemac Před 2 lety +3

    i suggest using distilled water to add to the flushing fluid.

  • @MrWillyworm1969
    @MrWillyworm1969 Před rokem

    I was looking for a video with some info on replacing the coolant overflow bottle on a BT-50 .Your video is close enough. I was just looking for info on how to bleed the system . From what i can see in your video it looks like it self bleeds all the air back into the bottle.
    Great video.

  • @denincns2277
    @denincns2277 Před 2 lety +1

    Excellent clip, very informative thanks. I have a 2014 BT50.

  • @wnaumea8871
    @wnaumea8871 Před rokem +1

    excellent and detailed explanation

  • @peterinthegong9437
    @peterinthegong9437 Před 2 lety

    Thanks once again. Much appreciated. Just did my Everest

  • @edisonferreiradossantos6480
    @edisonferreiradossantos6480 Před 3 měsíci

    Good job!

  • @kalalukamututwa5198
    @kalalukamututwa5198 Před 11 měsíci +1

    Is it safe to do the flush more than once if you want better results?

  • @chandamusonda6883
    @chandamusonda6883 Před 2 lety

    Very nice tutorial presentation.

  • @johnprice2606
    @johnprice2606 Před rokem +2

    I read saw on the VACC you tube video that the EGR cooler is susceptable to air locks and that it is recommended that refilling the coolant is only done with a vacuum refilling unit and bleeding process else EGR cooler failure is possible?

    • @killawattgarage
      @killawattgarage  Před rokem +3

      Vacuum refill is always a better option. However, these 3.2 fill pretty quick and easily and any trapped air is quickly purged. If haven't heard of others having any issues with the EGR after a standard refill (plenty of EGR failures though) It important to monitor the coolant level after the initial refill and you will have no issues. Thanks for the comment, I will pin it to the top

    • @johnprice2606
      @johnprice2606 Před rokem +1

      @@killawattgarage Thanks for the reply and info. Great videos as always.

  • @elmirgrassini4839
    @elmirgrassini4839 Před 4 měsíci

    VERY GOOD my friend, what is the model code for the Autralia Ranger ECU?

  • @ageraRable
    @ageraRable Před 2 lety +2

    If you put cold water from the garden hose , how is thermostat supposed to stay open for full flushing ?

    • @killawattgarage
      @killawattgarage  Před 2 lety +3

      I think I need to define 'Flushing' better. I am not flushing it with running water but refilling the system allowing that to heat up and flow around the system then replacing.

  • @utotmoko
    @utotmoko Před 2 lety

    Thanks dude now i know..new subscriber here from philippines.

  • @tyroneclarke1666
    @tyroneclarke1666 Před rokem +1

    Hi mate. Really appreciate your hands on videos. Cheers

  • @bethzarin6439
    @bethzarin6439 Před 2 lety +1

    You should use distilled water on the flushing.

  • @jackonip9792
    @jackonip9792 Před 2 lety +1

    Very informative 👍

  • @jadefraser8517
    @jadefraser8517 Před 3 lety

    You are a legend mate. Thanks really appreciate it

  • @chrischery2733
    @chrischery2733 Před 2 lety

    Thanks to you Mr and very good job

  • @TheBabyboy350
    @TheBabyboy350 Před 3 lety

    Greeting from USA nice video

  • @ianpotter1253
    @ianpotter1253 Před 3 lety +1

    At what mileage would you suggest a coolant change, do the oil every 5000 and the transmission at 40000. All filters at 20000. Thanks.

  • @craigpoodle118
    @craigpoodle118 Před 11 měsíci +1

    Is this the same as 3litre 09 model ? Cheers

  • @daaero
    @daaero Před 3 lety +1

    You don't remove the thermostat during a flush?

    • @killawattgarage
      @killawattgarage  Před 3 lety +2

      Ideally yes. But with no evidence of corrosion I took a short cut. If the coolant was long overdue and discoloured I definitely would.

  • @loydranon9487
    @loydranon9487 Před 2 lety

    How to top up my ford ranger 2017 model ,the coolant is at minimum level.Thank you for your advise. Stay safe

    • @jemax07
      @jemax07 Před 2 lety

      Just add and Fill until you reach the F Mark.

  • @isaacmakola6687
    @isaacmakola6687 Před 2 lety

    Thank you

  • @jadefraser8517
    @jadefraser8517 Před 3 lety

    Would you suggest it self bleed or do u give the hoses a small squeeze to despell the air

  • @jayveebaltazar1606
    @jayveebaltazar1606 Před 2 lety

    How many liters of coolant did you use? You forgot to mention it buddy

  • @jadefraser8517
    @jadefraser8517 Před 3 lety

    Thanks mate. Do u still run the heater when putting new coolant back in

  • @user-zx3mq4mt9s
    @user-zx3mq4mt9s Před 2 lety

    How much does a liter of radiator water take?

  • @Toyotards
    @Toyotards Před rokem

    how many liters of coolant added all in all?

  • @dslade3438
    @dslade3438 Před 2 lety

    Legend

  • @TheMinize
    @TheMinize Před 2 lety

    ขอบคุณมาก ถึงจะฟังไม่รู้เรื่องก็เถอะ

  • @calebjones7769
    @calebjones7769 Před 3 lety

    Can you use bottled water to do the 50\50 mix ?

  • @ianpotter1253
    @ianpotter1253 Před 3 lety

    Sorry should have asked what brand of coolant.

  • @matchboxmysterytourrestora1750

    Thank you mate.. 3444.

  • @loydranon9487
    @loydranon9487 Před 2 lety +1

    Im from manila Philippines