How to Replace Engine Water Pump 1995-2001 Ford Explorer
Vložit
- čas přidán 29. 08. 2024
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ic/1AEW...
This video shows you how to install a TRQ water pump in your 1995-2001 Ford Explorer. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
1995 Ford Explorer
1996 Ford Explorer
1997 Ford Explorer
1998 Ford Explorer
1999 Ford Explorer
2000 Ford Explorer
2001 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obb8/1A...
• Pocket Screwdriver
• Pry Bar 1aau.to/oNx/1AX...
• 13mm Socket 1aau.to/obgE/1A...
• 8mm Socket 1aau.to/oaXT/1A...
• Fan Clutch Wrench
• Channel-Lock Pliers 1aau.to/ojK/1AX...
• Ratchet 1aau.to/obrv/1A...
• Socket Driver
• Socket Extensions 1aau.to/obgE/1A...
• Gloves 1aau.to/oMM/1AX...
• Liquid Thread Locker
• Safety Glasses 1aau.to/oGg/1AX...
• Drain Pan 1aau.to/owh/1AX...
• Floor Jack 1aau.to/oV9/1AX...
• Jack Stands 1aau.to/oPt/1AX...
• Pick 1aau.to/oJJ/1AX...
• Razor Blade / Gasket Scraper 1aau.to/oii/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
You need to specify that this is the 5.0L V8. I have an 01 Explorer with the 4.0 V6 and my water pump is different.
It is easier to leave the belt on before you loosen the fan clutch, it helps hold the water pump pulley in place, but if you have special tools it would not really matter, for us backyard guys, it helps.
I cannot believe a shop quoted one of my students $3000.00 to do that. That's way easier than on that same block in ANY of the Vics or Marquis I've owned!
Informative, ty 🤙🏼
Literally having this done this week after serpentine belt broke on me
Be easy on the studs. Ask me how I know...
It's amazing none of the bolts snapped. What kind of thread sealant?
Is it OK to use a little flexseal to stick gasket on water pump?
Did all that and didn't replace a $6 hose?...