why cant anyone in the USA do great work like this you are the best ! Teddy I wish that i can find a honest repair man like you to take all my vintage electronics repaired and serviced Bravo !
There's an old serviceman's saying I once heard "you know you've successfully repaired something when you don't have any screws or parts left over after re-assembly and it all works properly"
I totally understand what the an old serviceman's saying. I recently finished JVC M-70 and there was someone's hand before me. Some of the parts missing, screws were set to different position, etc... at the end of the day, I was able to correct all of them and M-70 became a nice looking and producing great sound again.
@@teddyhashee I completely understand the frustration with something someone else has messed with and you have to spend many hours correcting their mistakes in order to put something right again. Been there done that. I recently came across a couple of Sony boomboxes which had issues - complicated by the fact someone else had been inside them before me and screwed up the works. Took me nearly a week and a half to put them both right - I'm surprised I still have hair on my head after that! _(this does not apply to standard faults which may occur during the normal service life of any electronics)_
Not bad for a simple design - that AIWA deck looks and sounds smart now. I had a black late 80's model National (purchased around 1991) that looked similar (equalizer, single cassette, detachable speakers, etc.) though the tape deck was on the left side with the equalizer on the right. It was dead at first, but worked fully after re-capping the power supply section and cleaning/minor repair to the tape mechanism - including replacing the belts. Eventually I gave it to a friend. Thanks to Teddy's videos, I can now get a rough idea of how to modify them after initial routine repair and clean-up. Keep up the good work. :-)
Thank you for sharing your memory with this boombox. There was another viewer told me same thing that vintage boombox in his young age packed with precious memories. It is good to get back to our young age memories sometime!
Teddy AIWA CA-30 fixing the problem is really fantastic. I have AIWA XR-EM200 Which I am using for my computer as a sub woofer. Unfortunately I had problem in the CD drive & had problem with the cassette player also. But given it for repairs.
This man is doing proper boombox and or electronic restorations even if it is not stated in the title unlike some other youtubers that spray a couple of time on a potentiometer or a rotary encoder with some cleaner and they call it restoration. GOOD JOB @Teddy Hashee
Realmente é um trabalho magnífico, com certeza dá muito gosto de se ver o resultado de um aparelho como este totalmente limpo e bem revisado! EU GOSTARIA MUITO SE VOCÊ PUDESSE ME INFORMAR O NOME DA TRILHA SONORA USADA PARA FAZER O TESTE DE ÁUDIO NO FINAL DESTE VÍDEO!?
Very nice video! I learned some new skills from you for example:how to not get scratches on the cabinet of the device. This tape transport mechanism is good. Todays boomboxes have only plastic flywheels inside them.
When I remove all parts, I took many pictures, I write memos and I organized small tray that I put each parts and screws in. I can get back to put it back together with these records and order of the trays. I think you can do it too!
I just picked up an Aiwa handled one piece boombox from a local Goodwill store for $19, it's a CSD-TD31 in silver or whatever, looks like the tape deck motor is not running at all, no action on any buttons. However the CD deck works fine, and the radio is working great, all digital tuning. Antenna was intact. Batteries work great. Mainly I bought it for a bathroom dedicated unit for the radio and CD so I think it was a decent deal. They also had a Sony detachable speaker boombox a large one, but the CD didn't load, and the battery compartment was corroded, so I skipped it. Both of them seem like 90s models. My boombox only has 3 setting EQ, and QSound "3D" sound button, no XBass switch.
239th Like: I learnt: How the demagnetizer looks like I met finally this mysterious soft eject "grease" How to tune the motor speed on a A note reference cassette recording. This unit reminds me how the competition for quality was until the 90's in building electronic equipments (speaking about known brands) Great Job sir! thanks for sharing!
Blockbuster had a issue with the plastic head mount. There were other boom boxes that shared that same fatal flaw. It can be fixed but it's very tricky.
@@danielknepper6884 Thanks Daniel. I keep putting off triage on mine... hoping it's not going to be that, but more than likley it will be. @TeddyHashee could fix it, right Teddy?
I have three or four boomboxes in my collection that had that same tape deck design.Most of the time they were made in Taiwan , General Electric boom boxes that had that. If they just made that part out of stronger plastic or even metal it would have been perfect.
Classic with SW bands, Love it. I have a whole bunch of HELIX brand units from Component to a old HELIX 9" TV/CB radio combo that was made for 1 thing, Holiday Rambler 1983 Motorhomes
Hy Teddy, almost the mechanism of my Aiwa, I opend it but then I lost myself and abandoned the work. Difficulties in replacing the main flat belt of the flywheel. For now. Nice to see you. Regards.
Звучат хорошо,но большой сложности там нет.Подвесы динамиков почти у всех сыпятся и пассики у всех вот в таком состоянии.А их 4.Отмывать долго будешь:-)
Good job teddy ! There should be more people to appreciate your work. I am ordering the Aiwa CA 100 in a condition that needs repair and I'm curious before the unit arrives ... the second rubber on the this Aiwa mechanism, using the flat or standard type? thank you :) Greeting from indonesia
Hay modelos de radios antiguas muy complicadas de reparar, pero merecen ser restauradas y vueltas a la vida. Buen trabajo., Así es cuando se trabaja bien intentando no romper nada y que todo quede funcionando impecable... Saludos desde Chile...
I just rebuilt and changed belts, caps, and wires on the same exact radio. Except I’m at a standstill. The little plastic arm in the Cassey player section that has a rubber wheel and pulled by a spring is cracked. The wheel cannot spin so it cannot play a cassette. Is there somewhere I can buy this little rubber wheel from?
Hello, do you have by chance the service manual to share? I'm trying to fix a aiwa ca-30 that i found. The head assembly doesn't raise fully. I dissambled a lot of the mechanic but i don't understand what drives the head up. If i help with my hand it goes up freely but it won't stay there and engage with the reel. Thank you so much if you can help!
I own a national rx cw50 with two cassette player. But one of them is jam and inst opening for cassette input and the other isn't playing I want to fix it please help me
Hi) I'm looking for serwice manuals for Aiwa C30Z. Can you help with this,please. Actually I need to put back function selektor back in place,but the lines on the board a destroyed.
Dear Sir, Appreciate your work.. i am big fan of you... i have again question for you.. why u didnt update speakers and this time you didnt install bluetooth?
The original owner of this boombox wanted it to be an original condition. NO additional features, just radio and cassette deck as it should be. And I also like this way. I do many mod on the boombox when the owner ask me, but my intention is always make it as it was. But when I found a very damaged and abused boombox, then I do mod outside looking as well as inside mechanism. The speakers of this AIWA were just GREAT. There was no need to replace them. It was A beautiful and powerful speakers.
I just got a vintage Sony boombox and the left speaker is having some kind of issue. It’s a double cassette deck. When I barely touch the volume slider the speaker makes distorted sounds and when I rewind my cassette the same speaker goes all crazy with distortion. If you hit play the tape plays like normal coming out the same speaker. Anyone have any ideas ?
First, you want to clean the all contact with contact cleaner to see any change. Then if the problem still persist, then you want to remove the cassette deck and clean inside out, especially the leaf switches and around.
It wiil be good again Japan started manufacturing this boomboxes. People will buy it. Because now days no any such recorder available, not good quality also.
Hola yo soy del País Chile Tengo una radio C.ITOH tiene problema en casetera. Al poner play se escucha el casette lento. Le cambie las correas de gomas y sigue igual. Alguna recomendación?
Did you adjust the motor speed? tinyw.in/Tp0o In this sample picture, there is a small hole, you use flat head screw driver to adjust the valuable resistor inside of the motor.
Not sure what is wrong with it until I see and test it. Test it with removing the cassette deck connection, if it still has hum sound, then you need to check the electric component on the board one by one.
The price of the boombox is depends on the condition, popularity, and other factors. So I can not say it is priced high or not. But these days the boombox is over priced especially by online seller. That what I think. if I buy this one in locally, and if it is super mint condition I will start offering $30, probably it will end up less than $100. if it is not in good condition cosmetically or not I will not pay more than $40. But if the item is on sale online, it is very difficult to negotiate with seller.
@@teddyhashee I have an aiwa nsx-k580 hi fi speaker. I don't know whether it is made in Japan or not.These days companies mention their Brand name with "Headquarters" address and at last made in China.... Lol
@@teddyhashee Yes the Fisher can be called a boombox.. But it's really " Portable Stereo Gear" that you can use at home with the speakers detached, or outside like a Boombox.... So it can be called either or.... But I ain't here to argue that point.. Peace and Long Life.... :) Take a look at this : www.ebay.com/itm/Fisher-PH-220K-Cassette-Not-Working-4-Band-Boombox-Vintage-AM-FM-SW-LW-Premium-B/273632339593?hash=item3fb5c22689:g:BE4AAOSwFoNcKP~U
Thank you for your reply. First of all, I am also a peace lover and not going to argue with you. I just wanted to clear my understanding of how to use "boombox" or how not to use "boombox" on my channel. As you said that these small radio cassette deck must be called a personal or a portable stereo comparing with huge one box radio cassette deck with a superpower. When I use "Boombox" in my title, that will give a chance for the viewer who is looking for a various type of cassette radio from the '80s and '70s. So regardless of the type of cassette radio, I just used "Boombox" or "Ghettoblaster" for the search result. So I may keep using the same "Boombox" word in my title, so if you understand my position that will really good help for my future videos. Thank you and Peace to you too.
Este pobre aparato, estuvo expuesto al sol o a una fuente de calor extremo. Y la primera avería que se presenta, son el derretimiento de la polea de transmisión del mecanismo del cassette, típico de radios puestos a venta del público, en ferias y exposiciones de cosas usadas,en recintos abiertos al aire libre. Saludos desde Chile ☺
Hi, Abraham. Thank you for visiting my youtube channel. As you said that heat will melt the drive belt and it will start messing the cassette mechanism. After complete cleaning and installation of new belt, it starts sound great again.
Teddy Hashee the point is that the cassette does not work just forward or backward but the play does not work just as the 100Hz band equalizer does not respond
I am all booked for the restoration order right now, not accepting new order right now. but contact me at teddy.hashee@gmail.com for more detail if you would like to.
I too have an AIWA Compact Disc Stereo System NSX-AJ310 with a double tape deck, neither of which will play a cassette. All the other functions work perfectly,, the 3 CDs, AM/FM radio sound great. The Geek Squad told me to trash it since it is 18 years old and nobody has parts. Could this be made to play my tapes again?
@@shecky308 I have no idea since AIWA support was taken over by Sony, The cost of shipping and receiving back the system would be prohibitive. Looking at all the you tube fixes is scary to a novice's attempt to change the belts if that is the problem and where do you get the "proper" belts anyway. I will try to find a belt supplier before I would open the system up and attempt a replacement myself. I will not use rubber bands for sure are doing all that intricate repair.
why cant anyone in the USA do great work like this you are the best ! Teddy I wish that i can find a honest repair man like you to take all my vintage electronics repaired and serviced Bravo !
There's an old serviceman's saying I once heard "you know you've successfully repaired something when you don't have any screws or parts left over after re-assembly and it all works properly"
I totally understand what the an old serviceman's saying. I recently finished JVC M-70 and there was someone's hand before me. Some of the parts missing, screws were set to different position, etc... at the end of the day, I was able to correct all of them and M-70 became a nice looking and producing great sound again.
@@teddyhashee I completely understand the frustration with something someone else has messed with and you have to spend many hours correcting their mistakes in order to put something right again. Been there done that. I recently came across a couple of Sony boomboxes which had issues - complicated by the fact someone else had been inside them before me and screwed up the works. Took me nearly a week and a half to put them both right - I'm surprised I still have hair on my head after that!
_(this does not apply to standard faults which may occur during the normal service life of any electronics)_
Not bad for a simple design - that AIWA deck looks and sounds smart now. I had a black late 80's model National (purchased around 1991) that looked similar (equalizer, single cassette, detachable speakers, etc.) though the tape deck was on the left side with the equalizer on the right. It was dead at first, but worked fully after re-capping the power supply section and cleaning/minor repair to the tape mechanism - including replacing the belts. Eventually I gave it to a friend.
Thanks to Teddy's videos, I can now get a rough idea of how to modify them after initial routine repair and clean-up.
Keep up the good work. :-)
Thank you for your compliment on my work! You are also great that you restored 80's National boombox!
Oh, detachable speakers. Nice! Also, that's some very good bottom end for plastic enclosure. Aiwa was on the top of its game in the 90's.
The speaker box was designed in really good. There was no dust inside at all.
Many years ago I have this teddy you remind me those days
Thank you for sharing your memory with this boombox. There was another viewer told me same thing that vintage boombox in his young age packed with precious memories. It is good to get back to our young age memories sometime!
@@teddyhashee qrtát
0Ra0
ñtaa
ñtáa
I have the same one from 1987 with the same problem, you can't imagine how I wish I had your abilities or have you in my nearby ❤
this i wat i like lol ! the old classic big boomboxes its cool to see you go to work restoring mods keeping these stereos going great work friend .
Thank you Roger for your compliment on my work!
Teddy AIWA CA-30 fixing the problem is really fantastic. I have AIWA XR-EM200 Which I am using for my computer as a sub woofer. Unfortunately I had problem in the CD drive & had problem with the cassette player also. But given it for repairs.
Hi, Dakahana. Thank you for the compliment on my work! You have a beautiful machine, enjoy music!
old boomboxes are great and thanks teddy that he keeps these things alive
Thank you for your compliment on my work!
This man is doing proper boombox and or electronic restorations even if it is not stated in the title unlike some other youtubers that spray a couple of time on a potentiometer or a rotary encoder with some cleaner and they call it restoration. GOOD JOB @Teddy Hashee
Thank you for your compliment on my work! I am flattered!
Realmente é um trabalho magnífico, com certeza dá muito gosto de se ver o resultado de um aparelho como este totalmente limpo e bem revisado!
EU GOSTARIA MUITO SE VOCÊ PUDESSE ME INFORMAR O NOME DA TRILHA SONORA USADA PARA FAZER O TESTE DE ÁUDIO NO FINAL DESTE VÍDEO!?
Back in my youth, I owned that Aiwa Boombox, albeit in the black finish. It served me well until wear finished off the rec/pb head.
Very nice video! I learned some new skills from you for example:how to not get scratches on the cabinet of the device. This tape transport mechanism is good. Todays boomboxes have only plastic flywheels inside them.
Thank you for your compliment, and I am glad you found new technique from my video!
Excellent work I have a few vintage boomboxes and I am afraid to dismantle and repair them due to no confidence in putting them back together again.
When I remove all parts, I took many pictures, I write memos and I organized small tray that I put each parts and screws in. I can get back to put it back together with these records and order of the trays. I think you can do it too!
great. it´s amazing how complicated machine and mechanism man made...
Indeed, the inside mechanism is just fascinating!
I just picked up an Aiwa handled one piece boombox from a local Goodwill store for $19, it's a CSD-TD31 in silver or whatever, looks like the tape deck motor is not running at all, no action
on any buttons. However the CD deck works fine, and the radio is working great, all digital tuning. Antenna was intact. Batteries work great. Mainly I bought it for a bathroom dedicated
unit for the radio and CD so I think it was a decent deal. They also had a Sony detachable speaker boombox a large one, but the CD didn't load, and the battery compartment was corroded, so
I skipped it. Both of them seem like 90s models. My boombox only has 3 setting EQ, and QSound "3D" sound button, no XBass switch.
239th Like: I learnt:
How the demagnetizer looks like
I met finally this mysterious soft eject "grease"
How to tune the motor speed on a A note reference cassette recording.
This unit reminds me how the competition for quality was until the 90's in building electronic equipments (speaking about known brands)
Great Job sir! thanks for sharing!
Thank you for your compliment on my work!
Wow this looks so good I'm in love from first sight.
My Blockbuster has the feather touch too... I hope its issues are just belt related as well.
Great job with this one!
Thank you for your compliment!
Blockbuster had a issue with the plastic head mount. There were other boom boxes that shared that same fatal flaw. It can be fixed but it's very tricky.
@@danielknepper6884 Thanks Daniel. I keep putting off triage on mine... hoping it's not going to be that, but more than likley it will be. @TeddyHashee could fix it, right Teddy?
I have three or four boomboxes in my collection that had that same tape deck design.Most of the time they were made in Taiwan , General Electric boom boxes that had that. If they just made that part out of stronger plastic or even metal it would have been perfect.
Great job. I sill have an AIWA from the 90's in good working condition.
AIWA has a great sound! Everybody envy you!!
Classic with SW bands, Love it. I have a whole bunch of HELIX brand units from Component to a old HELIX 9" TV/CB radio combo that was made for 1 thing, Holiday Rambler 1983 Motorhomes
Wow, you are quite a collector!
Thanks much, If you want some of them when I sell my house just pay postage and I'll send you some cool electronics.
Thank you for the generous offer!
Hy Teddy, almost the mechanism of my Aiwa, I opend it but then I lost myself and abandoned the work. Difficulties in replacing the main flat belt of the flywheel. For now. Nice to see you. Regards.
Take a time. Do not rush. And most importantly you want to enjoy the work.
Bautifull Aiwa! Nice job!
Thank you Rodrigo for the compliment!
Old is GOLD
Amazing Work, Man...!!!!. Gongratulations.
Disfruto bastante ver tus video , porque me gusta las radioreproductoras ,sobre todo las de caseteras.Saludos !.
Thank you Paulo for your compliment on my work!
@@teddyhashee cool is very great soundtrack music Aiwa radio casette recorder congratulations friend of Tabasco, México city
Very Nice, You have made it look and sound great again!
Thank you for your compliment on my work!
Just found this "repair job" . Good as new
Great unit. Fantastic job. I have the same unit and it's at the shop with the same problems. Will be elated to get it back.
Hi, Philip, thank you for the compliment. You are sure excited about getting your baby back!!
Yes. It has the exact problems as the 1 you have here. It's my first boombox.
Super. High level master
Thank you for your compliment on my work!
Респект! Айва серии СА аппараты особой сложности японских инженеров, сам знаю по опыту! Лайк)
Звучат хорошо,но большой сложности там нет.Подвесы динамиков почти у всех сыпятся и пассики у всех вот в таком состоянии.А их 4.Отмывать долго будешь:-)
@@DcDTB 3 и 30-ки с тканевым подвесом. Пасики как гудрон стали, это да ))
@@sova3ful Может.Я их несколько ремонтировал.В 30,значит, мотор сгорел.А подвесы,получается,в С 70
Thank you for the comment!
Thank you for the info!
Браво друг!!!!! Мы из России, смотрим и наслаждаемся, как всё чётко и хорошо получается !!!!
Thank you for visiting my youtube channel and a great comment!
Good job teddy ! There should be more people to appreciate your work. I am ordering the Aiwa CA 100 in a condition that needs repair and I'm curious before the unit arrives ... the second rubber on the this Aiwa mechanism, using the flat or standard type? thank you :)
Greeting from indonesia
Warm analog sound, great job!
Thank you for your compliment!
I love oldschool tech.
Thank you for the comment. I love them too!
Hay modelos de radios antiguas muy complicadas de reparar, pero merecen ser restauradas y vueltas a la vida.
Buen trabajo., Así es cuando se trabaja bien intentando no romper nada y que todo quede funcionando impecable...
Saludos desde Chile...
Hi, Emilio. Thank you for your compliment on my work!
Aquí en argentina hace falta técnico de ese nivel.!!!
Eu tive um Microsystem da Philco-Hitach, um PMS-550D, um aparelho sensacional e muito bonito!
Great work! Which app did you use to calibrate the tapespeed?
The app is called TUNER T1
You can find on ios or android both.
Very good job for this radio !
health in your hand, I wish I could buy one from you
Whenever I have a time to restore boomboxes, I will list them online for sale.
Teddy Hashee
Ok
GREAT JOB
Thank you!
Посмотрел от начала и до конца с интересом. Лайк.
Стремящийся привет ! Я тоже смотрю как этот мастер умело восстанавливает , оживляет технику . Мастер привет вам из России!!!!!
@@Aleksey-1971
Мастер высшего класса. Очень надеюсь, что у него есть ученики, которым он передает свои бесценные знания.
Thank you again!
I am flattered. Thank you for your compliment!
You can do it too!
que buen trabajo, saludos desde argentina
Thank you Leo!
Awesome job as always.
Thank you for your compliment!
I just rebuilt and changed belts, caps, and wires on the same exact radio. Except I’m at a standstill. The little plastic arm in the Cassey player section that has a rubber wheel and pulled by a spring is cracked. The wheel cannot spin so it cannot play a cassette. Is there somewhere I can buy this little rubber wheel from?
Hello, do you have by chance the service manual to share? I'm trying to fix a aiwa ca-30 that i found. The head assembly doesn't raise fully. I dissambled a lot of the mechanic but i don't understand what drives the head up. If i help with my hand it goes up freely but it won't stay there and engage with the reel. Thank you so much if you can help!
Great job，2 thumbs up！
Great 👍
日本人です。AIWAラジカセを持っていました。SONYの下請け会社です。性能は世界一。
こんにちは。ＡＩＷＡがすごいメーカーであったということは、私もいろいろ調べてみて分かりました。世界中の人たちが今でもＡＩＷＡのラジカセを愛するのも最もだと感じました。
/ much more fun than politics.
THANKS /
Thank you MusikDigger for your compliment on my work!
Can you give the name of the tape and the program that regulates the crystal setting?
You're a genius!
Thank you for your compliment on my work!
I have a 618 3448 and the deck won't work any place I can take it or fix it?
J'aime bien la radio y avait du boulot dessus
Thank you for the compliment!
Amazing one !!
Thank you!
I own a national rx cw50 with two cassette player. But one of them is jam and inst opening for cassette input and the other isn't playing I want to fix it please help me
Hi Teddy! what size belts are needed for this machine?
Olá teddy! 👏👏👏👏👏👏👏👏👏
Hi, Anderson!
i m looking for hitachi model name mw-w707w model .any help regarding this?
No frequency LED indicator in the radio..good cleaning...mechanism timing and replacing... Ok
Thank you for pointing out.
Hi) I'm looking for serwice manuals for Aiwa C30Z. Can you help with this,please. Actually I need to put back function selektor back in place,but the lines on the board a destroyed.
Beauty! Where to buy these cool white speakers now? )))
If you serch on ebay or another online selling place, I think you can find the white color cone for your boombox.
@@teddyhashee Thank. I'll try to find it."...
very cool
Thank you for your compliment!
Dear Sir, Appreciate your work.. i am big fan of you... i have again question for you.. why u didnt update speakers and this time you didnt install bluetooth?
Possibly the client wanted it to remain as factory wine, and he didn't want me to add any of those things.
The original owner of this boombox wanted it to be an original condition. NO additional features, just radio and cassette deck as it should be. And I also like this way. I do many mod on the boombox when the owner ask me, but my intention is always make it as it was. But when I found a very damaged and abused boombox, then I do mod outside looking as well as inside mechanism. The speakers of this AIWA were just GREAT. There was no need to replace them. It was A beautiful and powerful speakers.
Thank you Maurex, you are right!
@@teddyhashee Thank you Sir for reply.. you are great and genius man.
I just got a vintage Sony boombox and the left speaker is having some kind of issue. It’s a double cassette deck. When I barely touch the volume slider the speaker makes distorted sounds and when I rewind my cassette the same speaker goes all crazy with distortion. If you hit play the tape plays like normal coming out the same speaker. Anyone have any ideas ?
First, you want to clean the all contact with contact cleaner to see any change. Then if the problem still persist, then you want to remove the cassette deck and clean inside out, especially the leaf switches and around.
Wow thanks😉
Thank you for watching my video!
It wiil be good again Japan started manufacturing this boomboxes. People will buy it. Because now days no any such recorder available, not good quality also.
Thank you for the comment. Indeed, it has a great power to play and record in high quality.
Muito Legal mesmo parabéns
Thank you Jose!
Que bom trabalho exelencia para bens gostei muito abs
Thank you for your compliment!
super excellent mechanical
india tamilnadu
Thank you for your compliment!
What is the solution that cleans the parts of the rollers in order to benefit and thank you?
I used rubbing alcohol.
Is it possible to write the name of the solution company@@teddyhashee
Классный аппарат ,я бы купил его у вас
Thank you for your compliment!
Very awesome job! How do i get in contact with you to get more info on restoration? Thank you!
email me at teddy.hashee@gmail.com
Nice men!!!!!!
Thank you Alexander!
Hola yo soy del País Chile
Tengo una radio C.ITOH tiene problema en casetera. Al poner play se escucha el casette lento.
Le cambie las correas de gomas y sigue igual.
Alguna recomendación?
Did you adjust the motor speed?
tinyw.in/Tp0o
In this sample picture, there is a small hole, you use flat head screw driver to adjust the valuable resistor inside of the motor.
Hola boy a aser lo que me recomendó
Gracias.
Top em
Hi I have a hitachi msw600e tape deck, it makes a nasty loud hum sound when switched on. Could it be the transformer??
Not sure what is wrong with it until I see and test it. Test it with removing the cassette deck connection, if it still has hum sound, then you need to check the electric component on the board one by one.
@@teddyhashee Thanks! Will try that.
I have an old Sony Boom box but when I put a Cassette tape it makes a noise if you know I appreciate the help thanks!
What kind of noise? Describe more detail to understand about the problem.
Ésta RADIO Tiene Doble Salida De Micrófono?
Yes it has.
😱👍👍👍👍
Can you try to fixs my raido to sir
Mr hashee , from your experience in Boomboxes , do you think 360 $ is a fair & rational price for this old boombox ???
The price of the boombox is depends on the condition, popularity, and other factors. So I can not say it is priced high or not. But these days the boombox is over priced especially by online seller. That what I think. if I buy this one in locally, and if it is super mint condition I will start offering $30, probably it will end up less than $100. if it is not in good condition cosmetically or not I will not pay more than $40. But if the item is on sale online, it is very difficult to negotiate with seller.
@@teddyhashee Thank you so much Sir ! your information is always valueble
Amazing... still looks new, Is this made in japan?
Yes
@@teddyhashee I have an aiwa nsx-k580 hi fi speaker. I don't know whether it is made in Japan or not.These days companies mention their Brand name with "Headquarters" address and at last made in China.... Lol
Legal
I HAD THE SAME MODEL
Great!!
I'd like to get somebody to fix my Aiwa CS-660 cassett deck, I live near Boston does anyone do that kind of thing fairly cheap?
I accidentally broke mine and idk how to fix it
Take a time, step by step, see inside and find out what is the problem.Then start fixing it. It will be a long journey, but worth to do by your own.
That's not a traditional Boom Box.. That is a portable cassette stereo with "Detachable Speakers"....
Boom Boxes are One Piece Units......
So, is this one also boombox or not?
www.wikiboombox.com/Fisher%20PH-492
How you define the boombox, I can learn from you.
@@teddyhashee Yes the Fisher can be called a boombox.. But it's really " Portable Stereo Gear" that you can use at home with the speakers detached, or outside like a Boombox.... So it can be called either or....
But I ain't here to argue that point..
Peace and Long Life.... :)
Take a look at this : www.ebay.com/itm/Fisher-PH-220K-Cassette-Not-Working-4-Band-Boombox-Vintage-AM-FM-SW-LW-Premium-B/273632339593?hash=item3fb5c22689:g:BE4AAOSwFoNcKP~U
Thank you for your reply. First of all, I am also a peace lover and not going to argue with you. I just wanted to clear my understanding of how to use "boombox" or how not to use "boombox" on my channel. As you said that these small radio cassette deck must be called a personal or a portable stereo comparing with huge one box radio cassette deck with a superpower. When I use "Boombox" in my title, that will give a chance for the viewer who is looking for a various type of cassette radio from the '80s and '70s. So regardless of the type of cassette radio, I just used "Boombox" or "Ghettoblaster" for the search result. So I may keep using the same "Boombox" word in my title, so if you understand my position that will really good help for my future videos. Thank you and Peace to you too.
Как с магазина, новенький)))
Thank you Sergo!
Ye Set Mujhey Pasand Hain Aap sale Karengey
すばらしい
ありがとう！
バイクの音がテープで笑った
その後よくわかんない曲流れてるし
コメントありがとう。テープは日立のオリジナル・サウンドテスト用のもので、内容は 1) Racing sound dynamics （レーシングカーのサウンド）および 2) Battle of Jerico （ジェリコの戦い）です。
Não se faz mais boombox com antigamente.
Thank you for the comment!
@@teddyhashee Do you undestand my comment in portuguese? I recommend watch the Uebe Vintage channel on CZcams.
RX C 100 Price
Класс!!!
Thank you!
Really 80's ,90' s music players are awesome . Present boomboxs are shit plastics more build up less buisines
Este pobre aparato, estuvo expuesto al sol o a una fuente de calor extremo. Y la primera avería que se presenta, son el derretimiento de la polea de transmisión del mecanismo del cassette, típico de radios puestos a venta del público, en ferias y exposiciones de cosas usadas,en recintos abiertos al aire libre. Saludos desde Chile ☺
Hi, Abraham. Thank you for visiting my youtube channel. As you said that heat will melt the drive belt and it will start messing the cassette mechanism. After complete cleaning and installation of new belt, it starts sound great again.
Gloves. Is this a joke?
今現在と当時のゴムベルトの強度は同じですか◎◎
このラジカセに関してはベルトが溶けていましたので、今回使ったものとの強度の比較はできていません。選んだベルトはいくつかの候補の中から一番良い感じでフィットしたものを使いました。たぶんオリジナルのほうが強度は高いものだったと思います。最近量販されているベルトは当時のものと比べると薄くて幅も狭く、強度も弱いと思います。最終的にはモーターでスピードの調整ができますので、再生、早送り、巻き戻しでテープにダメージがないように仕上がれば良いと思っています。参考になれば幸いです。
I have a Sanyo c60 that I I would love to get help with It would greatly appreciate it if you would contact me or let me know of a way where I could
What is the issue with your boombox?
Teddy Hashee the point is that the cassette does not work just forward or backward but the play does not work just as the 100Hz band equalizer does not respond
where can i send my boomboxes for repair.they broke very prematurely.are you in the boombox repair buisiness????Let me know..!!!!
I am all booked for the restoration order right now, not accepting new order right now. but contact me at teddy.hashee@gmail.com for more detail if you would like to.
I too have an AIWA Compact Disc Stereo System NSX-AJ310 with a double tape deck, neither of which will play a cassette. All the other functions work perfectly,, the 3 CDs, AM/FM radio sound great. The Geek Squad told me to trash it since it is 18 years old and nobody has parts. Could this be made to play my tapes again?
@@TheCourtesytom hey,what address do we send the boomboxes that go bad prematurely.i demand a refund,wouldn't you..... ????????
@@TheCourtesytom can't somebody or a new company make good boomboxes any more????????!
@@shecky308 I have no idea since AIWA support was taken over by Sony, The cost of shipping and receiving back the system would be prohibitive. Looking at all the you tube fixes is scary to a novice's attempt to change the belts if that is the problem and where do you get the "proper" belts anyway. I will try to find a belt supplier before I would open the system up and attempt a replacement myself. I will not use rubber bands for sure are doing all that intricate repair.