Toyota 1kd & 2kd-ftv Timing Belt Set-up

Sdílet
Vložit
  • čas přidán 14. 08. 2020
  • Please support our channel:
    G-Cash 09297681430
    Thank you!
    Timing Belt replacement guide applicable for Toyota 1kd-ftv and 2kd-ftv engine. Thank you for watching! Please subscribe for more.
    #timingbelt
    #2kd
    #1kd
  • Auta a dopravní prostředky

Komentáře • 76

  • @Knowledgeindia05
    @Knowledgeindia05 Před rokem +2

    Thank you to hame bolna chahiye thanks aisi video banane ke liye

  • @atp6064
    @atp6064 Před rokem +1

    If only all cambelts were so easy! Good video.

  • @thembelihleduma5903
    @thembelihleduma5903 Před rokem +1

    Easy staff thank you for the video

  • @adamali8639
    @adamali8639 Před 2 lety +1

    السَلآْم عَلْيُكّمٌ وٍرٍحَمُةّ الله وٍبُرٍكآتُهْ

  • @rohanwijesinghe2361
    @rohanwijesinghe2361 Před 3 lety +1

    Good job explain

  • @ToyotaHilux24
    @ToyotaHilux24 Před 2 měsíci +1

    ماشاءالله عليك ❤

  • @user-kx1ih2jc3r
    @user-kx1ih2jc3r Před 2 lety +1

    เยี่ยมยอดครับผม

  • @pramookrompo2639
    @pramookrompo2639 Před 2 lety +1

    ขอบคุณครับ

  • @cecilngwenya5308
    @cecilngwenya5308 Před rokem +1

    Smart n simple

  • @mohtizimohtizi
    @mohtizimohtizi Před 2 měsíci +1

    الفركنس كروا انترنتور

  • @sardok10
    @sardok10 Před 3 lety +1

    الله يبارك

  • @nicanorsaavedra1719
    @nicanorsaavedra1719 Před rokem +1

    Good

  • @nasseromili9273
    @nasseromili9273 Před 2 lety +1

    Thanks

  • @aitizazkhan6907
    @aitizazkhan6907 Před 3 lety +1

    Tnx bro

  • @josephsimon1922
    @josephsimon1922 Před 3 lety +1

    perfect

  • @benjaminjr.delossantos8773

    It seems so easy to do but when you tried it, it’s very difficult to do especially when you put back the belt. It’s very difficult to return it back so it would be better if you also show how did you return the belt w/o also difficulty in putting back the tensioner.

    • @DiYSpanner
      @DiYSpanner  Před 3 lety +1

      Thanks,

    • @jazzmitz9657
      @jazzmitz9657 Před 2 lety +2

      so the trick is vice press the tensioner pin it and booom.. done thank's! for sharing bro💪💪👍👍

    • @benjaminjr.delossantos8773
      @benjaminjr.delossantos8773 Před 2 lety +1

      I don’t have any problem with the tensioner because I can press it back. My problem is the timing belt because it’s short and no matter how hard I tried to fit it back, I just couldn’t but when I leave it to the mechanic, he was able to do it. So there must be something that you have to move so you could fit it back.

    • @pyromaniac354
      @pyromaniac354 Před 2 lety

      @@jazzmitz9657 when compressing the tensioner again do it slowly in small increments over a few minutes

  • @user-dp4kj1sm2e
    @user-dp4kj1sm2e Před 3 lety +2

    شكرا شكرا شكرا

    • @DiYSpanner
      @DiYSpanner  Před 3 lety +1

      Modir i dont understand arabic. Thanks.

    • @user-dp4kj1sm2e
      @user-dp4kj1sm2e Před 3 lety

      @@DiYSpanner أنا أفهم اللغة العربية فقط

  • @garED1678
    @garED1678 Před 3 lety +1

    I have 2KD sir but i don't have an idea. please give me for valve clearance adjustment Intake and Exhaust also the final torque like; Crankshaft bolt, Connecting Rod bolt and Cylinder head bolt.. please please!... thanks

  • @reynaldomalapad
    @reynaldomalapad Před 3 lety +1

    Wow

  • @sebastiaomatule5173
    @sebastiaomatule5173 Před 3 lety +1

    Oky quando ter força e n acelerar

  • @aizensousuke1390
    @aizensousuke1390 Před 3 lety +2

    No need to change oil seal??

    • @DiYSpanner
      @DiYSpanner  Před 3 lety +2

      Oil seal still good for this engine.

  • @anatolieceban4429
    @anatolieceban4429 Před 6 měsíci +1

    Hi mate, what kind of engine is 1kd and 2kd??

  • @fezilemabeqa2390
    @fezilemabeqa2390 Před 2 lety +1

    What would cause my tensioner not to tighten, is maybe the pin short and needs to be pulled up? Everything seems to be okay but still the belt won't tighten.

    • @DiYSpanner
      @DiYSpanner  Před 2 lety

      Maybe something wrong with the tensioner.

  • @snaptub2556
    @snaptub2556 Před rokem +1

    اريد أعرف كيفيه وزنية السير

    • @DiYSpanner
      @DiYSpanner  Před rokem

      Sorry, I have no idea about the weight.

  • @reynantegascon4312
    @reynantegascon4312 Před 2 lety +1

    Idol after mapalitan ang Timing Belt paano maalis yong lumabas na T-TIMING BELT sa Panel Board, lumabas nang umabot na ng 150,000kms?

    • @DiYSpanner
      @DiYSpanner  Před 2 lety +1

      To reset the timing belt indicator without Multi Information Screen (2013 on), proceed as follows:
      Turn on the ignition.
      Adjust the display so that it is showing the TRIP B reading. (See Diagrams)
      Turn off the ignition.
      Press and hold the trip meter button and turn on the ignition.
      Continue to hold the trip meter button for 5 seconds or more ensuring that the timing belt warning light is flashing.
      Release the trip meter button then within 5 seconds press it once.
      You now have 5 seconds to select the interval to the next timing belt change. turn the trip meter button to advance through the interval options.
      Note: the interval options will be a two digit number representing the kilometres multiplied by 10,000 eg: 15 = 150,000 Km’s
      Or if not changing the interval hold the trip meter button for 5 seconds or more.
      The display returns to the Odometer reading and the Timing Belt light will turn off
      To reset the Timing Belt reminder message without the Multi Information Screen.
      Switch the ignition ON and set the TRIP meter RESET knob (located on the lower right hand side of the cluster) to display the Odometer reading (not the trip meter reading) and then turn the ignition OFF.
      Press and hold the TRIP meter RESET knob and turn the ignition ON.
      Press and hold the TRIP meter RESET knob for a further 5 seconds, release it and then hold it in again within 5 seconds.
      Enter into the SETTING MODE and change to T-BELT DISPLAY MODE.
      Press and hold the TRIP meter RESET knob for a further 5 seconds.
      The display now changes to TRIP B and the warning light turns off indicating reset procedure is complete.
      Release the knob and turn ignition to OFF.

  • @humbertotorres9139
    @humbertotorres9139 Před 2 lety +1

    Buenas noches si se parte la correa dobla válvulas o no

    • @DiYSpanner
      @DiYSpanner  Před 2 lety +1

      No estoy seguro de si este motor es interferencia o no interferencia. La válvula se dobla cuando la correa de distribución se rompe en un motor de interferencia. ¡Gracias por ver!

    • @humbertotorres9139
      @humbertotorres9139 Před 2 lety +1

      @@DiYSpanner quede igual pero gracias por el video

  • @user-ne8bl7rr3h
    @user-ne8bl7rr3h Před 3 lety

    Look!!!

  • @kazo_mc
    @kazo_mc Před 4 měsíci +1

    😅😅😊

  • @saeedgamer4033
    @saeedgamer4033 Před 2 lety +1

    سلام من یه ماشین تویوتا هایلوکس مدل 2003دارم موتورش را تازگی ها تعمیر کردم ولی یک مشکلی که داره اینکه توی سرعت زیر 70کیلومتر موتور گاز نمیکشه میتونه این مشکل از سوپاپ ها باشه با تشکر

    • @DiYSpanner
      @DiYSpanner  Před 2 lety

      Im sorry i dont know arabic.

    • @saeedgamer4033
      @saeedgamer4033 Před 2 lety

      Hi, I have a 2003 Toyota Hilux car. I recently repaired its engine, but one of the problems is that the engine does not accelerate below 70 km / h. This could be a problem with the valves. Thanks

  • @febynemenzo8579
    @febynemenzo8579 Před 3 lety +1

    Camshaft at hp pump lang ang nka connect sa timing belt sir di kasama crankshaft?

  • @user-jh9bu2cb5h
    @user-jh9bu2cb5h Před 2 lety +1

    Какой интервал замены ремня на 2 KD?

  • @alejandrobaker7934
    @alejandrobaker7934 Před 3 lety +1

    Nasty, tensor and poley no change, bad bad,