Grand Marquis / Crown Victoria - Window Washer Pump Does Not Work
Vložit
- čas přidán 29. 08. 2024
- Let's take a look at this Mercury grand Marquis that came in with a customer complaint of "no window washers." It is a quick diagnosis with a wiring diagram and the parts are on the way!
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
THANKS A MILLION!!
--Eric O.
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.
99% chance the wiper motor is full of water. The drain in the cowl likes to get clogged with leaves and the motor sits in a pool of water. You’ll know when you unplug the connector and it will start dripping. Definitely use a OEM motor. I tried a rebuild one from auto zone and it sounded like a dying giraffe. Always fun doing a job twice.
We usually refer to Cardone as "Cardon't".
Do like scotty just get an on/off switch for the washer pump, cut a hole in the dash for it and solder the wires into the fuse box. DONE!
The Disgruntled Mechanic Scotty would have siliconed one of those air can horns on the roof
Had an old Chevy pickup with a bad switch, the wipers would run all the time unless I unplugged it under the hood. So when it starts to rain I would just pull over and plug in the wipers. I was much younger then.
I would connect it direct to the alternator and tie the switch to the steering with duct tape .... like any modern car with multifunction steering controls. Hey, no one have wipers on the steering
The Disgruntled Mechanic LOL!!!
Way too complicated - a squirt bottle of windex, and some rope for the driver and passenger - teamwork wipers! :D
We The People thank you for bringing us along, Eric. :)
Thanks for "bringing along the people". Looks like it's getting cold out there. Brrrr. No thanks!
Years ago I helped my wife's uncle sell a bunch of those Ford wiper motors on Ebay for his business. They went for under $30 each. He got them for $2 or $3 each at auction as they were leftovers that the factory didn't use.
Thanks for reminding me to change my washer fluid today in the big truck. The old crappy freightshitter runs washer fluid from under the bunk outside under the floor up to the firewall. Anything near 32° it freezes. Need to use the -30 stuff plus add alcohol. Feels like temp in the teens last night,watching snow come down now up here in the big cheese
buy washer fluid in bulk and run winter formula year round? likely cheaper that way overall :)
throttle bottle - you must’ve been reading my mind
You’re going to be at 100k subs in a few days Eric O!! Been watching you since 10k, keep up the hard work with Sheeba!
Back in my day, we just hooked it to the horn button,so everytime you honked,you got the windows washed. I am just kidding but hey,sounds like fun!
Thanks for bring us along. Say hi to mrs.O from all the viewers. Also a BIG thumbs up to Trinity.
"There's your problem; it's an over-computerized American car!" And for people who fix Tauruses (at least 2001's), if you ever get a code for ECM keep-alive power after having a/c compressor issues, check the a/c fuse in the underhood fuse block. The Ford genuises ran the keep-alive off that fuse! Big Kudos to Mr. O and SMA for sharing so much knowledge that I wish I had a garage to work in, just to take things apart and put them back together again!
"Daddy why do you make me draw stuff 8 hours a day now?"
Great Video!
I just (1 month ago) replace Wiper Control Module in my mom's 2009 Grand Marquis for same/similar reasons. In this case wipers came on by themselves, then to make maters worse....the washer pump came on-line and squirted my square in the face while checking.
First thought was multi-function switch on column, but after many you-tube videos (like yours) chased down the wiper control module.
Thanks for the videos as I learn a lot from you and other youtubers willing to share their time and experience.
P
The old empty Joy bottle filled with water. Stick it out the window at 35 mph, squirt it twice, windshield clean as a whistle. Works every time........!
Okay, waiting to see the fix. Thanks!
Dorman Wiper motor: Fits perfectly, no problems, no soldering required, no angle grinder, nice connector. Then it runs slow as a snail. turns out it runs on 24V. Easy fix is buy and wire a second battery, change half of wiring of the car .... or even better ... sell the car and buy a RV, Bus or big truck that runs 24V power and install it there. Edit: People will complain anyways ...
WOW--a real mechanic making a good video! Thanks I'm happy to sub to folks who make good content like this. So many try but they don't get it. I went to fix my spray nozzles because they've always been clogged on this car---but found that the pump had quit working. So now I dig deeper, and with good info from here. Appreciate the simple and well-done video.
You hit 100,000 subscribers. Congratulations, Eric!
That's how she sees the family. Mom's the boss (Big Fish) in the family pond and Eric's out there at the surface having lunch❗
Eric, you might be surprised the mfgs. have rethought the parts process and are very competitive with the aftermarket on a lot of items. I started going OEM whenever possible just to save comebacks and working for free as you are well aware of. A-one cardone was killing me and so is Dorman on a lot of items. Their products almost fit, but ALMOST kills us.
Yup. Just as Nutz4Gunz45 predicts- I'd also say the motor/logic board is soaked. Leaf brine is very high pH (alkaline) and electrically conductive (mV & mA).
FYI, when at the pump, I like to use a noid light because they generally plug right in and still pull 200ma.
Thanks for the video. I'm having the same problem with my 04 Saturn Vue. I like your TS , trouble shoot, style.
Thumbs up! Always a pleasure to stop by the shop.
Best in-depth videos on You Tube
No B+ means more troubleshooting. Good Video. Thumbs Up!!!
Congratulations on reaching 100k. That is a well deserved number. Here's to 100k more.
Thanks for the video.
My quick hit of crack before work. Thanks
Good morning SMA
Got my SMA sticker, looks nice on my toolbox!
hello how do I get a sticker
50 more subs, and you got the big 100k!!
A new day is like a clean slate as is a clean window with a good washer system of life. Don't worry i make myself sick too.
Nice diag Eric and as you mentioned, definitely go for OEM such as Motorcraft :)
Motorcraft on the shelf and waiting
South Main Auto Repair excellent Eric and now I'm dealing with this vendor over this compressor. What a nightmare!
throw it through their window Terry! that will get their attention! maybe you in jail too but........
The Disgruntled Mechanic haha Mike, that would surely get their attention. 😀👍
Well done video. Straight forward no BS... new subscriber.
Good morning South Main Auto!
My 2007 Ford Edge SEL was totaled last month and I almost bought me a Grand Marquis but, ended up getting a 2010 Ford Explorer 4X4 V8 XLT.
I am a new subscriber and I love your show! Keep up the great work!
I can't believe you said you would rather have a used one I have been leaning that way and doing it for about 2 years now used seems to be better than new junk
Dale Vandermeer Just find a used Dorman.
For me I leave it up to the customer. Give them the choice. Some want the factory look others are ok with the bypass fix. Give them the option that way if they don't know much about cars they can find a alternative and leave knowing that you are not money hungery because if they hear that it could have been done a cheaper way they don't think they are just a dollar sign to you.
probably just the solder joints on the board connector fractured, if it was mine I'd take it apart, clean and re-solder :)
downside, not all can have just the circuit board removed easily.
Encouraging to see that Trinity has been taught about evolution
no actually, sometimes she draws us as fish, birds, deer , etc....
The wiper motor gets flooded due to the cowl holding water... Drill extra holes in the plastic to let the water escape..
another good video!!!
good vid .
What up Eric I had a problem with same car the plug to the motor was melted and shorted had to replace the plug and motor all fixed . Ps I got me a autel maxisys pro 😁😁 and I freakin 💕 it
The pins on the plug we're all corroded which caused it to short washers were going on when they wanted . Then it started to melt the plug.
dassme1 can u see waveforms of like 02 sensors and such? Like the snapon verus pro
E. Snow yes
dassme1 pray to God you don't need support from Autel for it!
Michael O actually believe it or not I called them numerous times already if they don't answer the phone they actually call back within 15 to 20 minutes so far I can't complain they actually are very helpful
That's an old issue with CV/GM's - called Wacky Wiper syndrome. As you found out in another video, the board gets screwed up somehow and it then it starts working randomly.
Best line of the whole video, "I'm certainly not going to put an A1 Cardone motor in it since I don't want to have to do that repair 5 or 6 times!" Eric O. makes me laugh so hard when he talks about Dorman and A1 Cardone being complete junk. How many steering racks did you have to put in that one time till you finally got a good one??? 7 or 8? OEM baby. OEM!
At 8:40 in the video what causes the distortion that it looks like the car is moving up and down. Is that someone bumping the camera. That was trippy.
Non-functioning windshield wash pump circuit?...Why didn't you check the dome lamp?...sorry, just can't seem to let go that evap code to p/s switch problem... ;)
LOL, the ashtray firmware needs to be upgraded first ....
@38911bytefree
I believe there is a TSB regarding that the firmware upgrade will only work on vehicles w/nitrogen filled tires and that is unfortunate for SMA as we all know Eric's air compressor stores and delivers "bad air" only...;)~
Cardone & Dorman...a mechanics nightmare. I'm in total agreement and won't install either and rather not waste my time or blemish my reputation or name with their junk. I'd rather go gamble in Vegas b/c my chances are better. I will use the Dorman nylon fuel line repair kit & lines but I'm pretty sure somehow they'll screw that up also.
Hayward's Automotive Wow! Cardone. I did some L.I.M. gaskets on a 3400 Olds Silhouette van, where the last thing I had to remove to get to the lower manifold was the power steering pump. It was buried deep, had to be removed, and was almost 200k on an 01 model. I decided that since it was so deep, and since I had it out, I would put another one in. The part store only had a reman Cardone in stock. I got it, did the work, and upon the first test drive, THE PUMP WAS FAULY! Had to go all back thru to change it again. I even filed a claim with Cardone for the labor claim, but they refused. I won't buy another Cardone part again! Just like the DORMAN crap. Sometimes you have no choice. But if I do.......
carDone & DorStop
WOW! another panther
Almost 100k subs!
Man, Ford ruined those cars. Our '86 Grand Marquis is STILL running the OE wiper AND washer motors! 31 years, 248k miles!
With a low mileage car it's not unthinkable that things have yet to wear out. You're averaging about 600 miles a month for the last 31 years. Most people can rack that many miles in a week.
Point taken .. BUT, lets see if these new ones are still running the OE fuel pump & power steering pump in 248k miles. :)
You consider 248,649 miles LOW?
for that year vehicle, it's almost broken in and probably just paid off =p :))
Well, thankfully she's been paid for just about 15 years ago. :)
Definitely just breaking in. Zero smoke from this ol' gal ... unless it's from that one-tire-fire from jumping on the go-pedal a little too hard. :D
45 subscribers to Eric woohoo
Let’s see the cow painting.
congrats on the 100k subs
That the same vic that came in with the fuse that started it...? Looks like any way I have a 2008 in white police interceptor with 130xxx love it
So was the wiper motor the fix? I have an 06 LX Sport Vic and mine came on on their own, washer fluid as well. Also the wipers only work on one setting. I changed the multi function switch and still has same discrepancy.
I guess basically the Lincoln Town car2001 has the same type of wiper circuit, if so let me know if possible. not a big deal if you can't. Thank you anyways for this information.
The ex Police Crown Vic returns? Hopefully the fuse isn't laying in the foot well........This car certainly keeps you busy. Look forward to seeing the repair Best Wishes
Ken Sherwood not the same vehicle. Different client, vehicle.
HOW IS MY FLASHLIGHT DOING??? THE ASTRO
I want my red Hondu 1.7 liter Fixed !!!!!!
YEA LETS GO ASTROS! oh...sorry wrong astro
Hey I watch your videos all the time I need your opinion 2006 Grand Marquis driver side carpet water keep coming in stay wet all the time?
I love those old big Fords. Last of the full size real wheel drive American cars.
What is the name of the tool you use to puncture the cable and to check the power? I need to buy one. Thank you. Have a nice day. Walter.
Ok, Guys i have a set of noid lights that i use to check circuit integrity. You would be surprised those noid lights fit a lot of 2 wire connectors. Am I in the wrong here, it sure saves time vs using a test light and going from power to ground and vise versa.
Put a noid light in this circuit and it does not light when the button is pushed, now what? Missing ground or missing power? Now you are back to the test light and switching it from power to ground to see what one is gone right?
I stand corrected, next time i will think it through before leaving a comment... lol
Chasing the cable
What is different about your shop? Good video
How do you like the Astro light? I just bought one.
My washer pump comes on with the headlights 😖😖😖 any fix for that?????
I just bought a Crown Vic that only has fast wipers and when I look at my Mitchell software they show a control module in the dash. I guess another bad wiring diagram.
Hate it when the Pixies won't dance
Great Job Eric where did you get your test light I would like to get a bigger one like that. Thanks
Which fuse # disables the wipers on a p71? Anyone know? I have the “random wipers” issue but cant find a decent schematic to help me
Whats that pokey tool you had in that wire?
So, I guess if the turbos ever go south on my 3.5 f150 ecoboost, i should NOT buy cardone reman units? believe it or not, they do list them...reman exchange.
Eric, totally random question, but somewhat related, have you had any experience with widsdshield washer fluid heaters, such as the old ones manufactured by Hotshot, now manufactured under the name AlphaTherm? I'm just curious if they actually help in the winters you experience there.
Eric why don't you use a fender covers when you work on cars and pick ups
Sam Rugtiv Because he knows better than wear carheart jackets with brass buttons on the cuffs,or a big brass zipper guarenteed to rip the paint. If anything,he polished the fender free. I would charge for that. Its not like he is working on Hundred thousand dollar vehicles. Fenders dont generally dont stand out like they used to. My Grandmother would go someplace else if she didnt see fender covers back in the day. Then again,you could feed a family of four off the top of a fender back then. You had to use a step ladder to reach the middle of the engine. I remember burning my knees resting them on the thermostat housing reaching behind the carb trying to get at the distributor so I could adjust the dwell. Yeah fun times.
belt buckles are hell on cars also, even with covers, I've dented a few, luckily beaters/winter rust warriors anyway
I knowed them eeeeelectric motor wipers would be nothing but trouble when I first seen one. I'm keeping my vacuum run wipers.
Sounds like an expensive part, a simple function made complicated/expensive :-(
yup, stops small garages and owners repairing their own vehicles, one of the reasons i gave up the trade....never been happier :-).
2017 and people "still" complaining about over-complexity. If only you knew how much money and "over complicated" tech went into you watching this video and making this comment via a computer and the internet. The most complex car to date is child's play in comparison.
we are talking cars here not computers, what was wrong with a washer motor, some wire and a push button ?, did adding complexity improve the washers ?.
Actually, it did much the same way computers and the internet improved phone calls and letters.
How often do you guys think Eric shaves his armpits? Once a month? Twice?
Your wife is super cute..lucky guy
hears a distant smack smack smack smack sound, listens towards Matthew, notices it's louder
Eric, can we get the info on your wire tap? That would come in hand along with the "scope on a rope". :)
44 now :)
What? No cardone? Note; I had to replace a rear caliper on mom in laws Buick on sunday, got a cardone one, leaked worse than the orginal
G'day, Mr.O! Oh, very nice! (a great fish illustration) And, "One-Two-Trio at A Little BBQ!!" Love to see the Grand Marquis/Crown Victoria... Motorcraft wiper motor replacement! Thank you very much!! I hope you guys have a great day! (bit.ly/2h1M1w3 ) Keep on Truckin'... Cheers! :D
Eric, what air hammer bits do you use? I need to get some nice ones for my astro. Bought the grey pneumatic set with it, but they are pretty soft
Get Them from AJAX Tool Company in Franklin Park Il. they are the best ones on the market and are industrial grade and a good value
Yep, I second that.
Nice light stick. Have it in your Amazon store?
Where do you get the wiring diagrams from?
Mitchell and Identifix...both are subscription services he pays for
What did you call that tool? "Hokie pokie" tool what is the actual tool name?
Dorman to the rescue? LoL
Probably would run backwards
Where does a guy find a decent incandescent test light these days? All I can find anymore is the led type.
Fish huh, Trinity is watching too much PBS.
If it's a MOSFET, ground side switching is easier.
It's true of BJTs (NPN or PNP transistors) as well. Due to a quirk of physics with silicon, it's much easier to make a power NPN or power N channel MOSFET than it is to make it PNP or P channel. Which makes ground side switching the way to go with these devices. Well, nowadays you can get some pretty good PNP or P channel power switchers so it doesn't make a big difference, but old habits die hard.
I follow you. But i think you can have subtitles your Chanel. Thanks
Hmm, Doing the Hokey Pokey to test out the squirter. Sounds a little dicey. Got to keep it PG at least. hahaha. Sorry, couldn't resist. Short quick and to the point. Sounds like my "hokey pokey". Wow, I need more coffee. Got to get me one of those high tech coffee maker's. As always thanks for the entertaining and informative video. Its not just a repair, it's an adventure. Thanks again brother...
Snake Skin Productions I think he said he "front-probed the old girl."
Was she your fist love (ginger)?
Marquis is your brother.....
Anything put "dorman"😕😕😁😁
Your wire is just larger than life, is my guess!