Thank you for such an in-depth review and demonstration. I was originally going to buy the Eclipse HP-CS (I'm a burgeoning miniature hobbyist) but this seems worth the extra cash. All the best.
Hi Rob (I knew you were Rob from the comments :D). Yesterday I got my first Iwata, an eclipse hp cs and really like it. I have used a Paasche before that and it is a great airbrush too, although it was a bit awkward using the Iwata for the first time since the pressing distance in the trigger is much less than on the Paasche. Still, didn't affect after I started painting. I want to say I really liked your video and the little maintenance routine with new airbrushes too. I did not find my needle to be so dirty as yours but there was indeed some dirt on it. I used alcohol and createx airbrush cleaner though since i dont have fast cut plus. Cheers!
I've used the plus and it's great, but my workhorse is my original HP-C that I've had for 20 years. Replaced the nozzle once, and a couple of needles. It's a fricking power house.
It's a great brush 👍 especially if your paint it a little bit thicker 😉 brilliant trigger good build Thanks for the feedback much appreciated enjoy your new brush
Interesting review Rob and it looks a nice airbrush (not that I know anything about them 😁) you cant go wrong with Iwata as they are a big brand and put out good quality spray guns. I might be in the market for a new full size gun, I fancy something different and a change to my DV1, I was looking at the Sata X5500 RP 1.2 I setup but not sure as yet 🤔🙏👍
Saludos amigo Rob. son muy buenos tus consejos, nos ayudan para sacar nuestro proyecto adelante si no es molestia nos puedes dar cosegos de precisión de aigre para el Ariografo te lo agradecería mucho un fuerte abrazo pará ti y tu canal 👏👏🤗👍🇲🇽
I have just subscribed to your channel. Great info and tutorial👍 i have just orderd this iwata airbrush. But can you swap out the needle for a smaller type rather then having to use a different airbrush, say a 0.2 mm for even finer details ?
I've got a couple of similar older Iwatas and the tiny internal O ring that the needle glides on is old and hard and the needle won't glide thru. I have some replacement O rings and have stripped the entire brush down, but can't see a way of removing the old O ring and replacing it since its so tiny and impossible to get at. So whats the method for doing this? Thanks
Great video mate...if you ever get tire of the cold weather come to 🇺🇸 and be my neighbor and bring Dean along😂 or if you just want to visit, mi casa es su casa...😃 ...you are absolutely right about the instant response about trigger on the Iwatas. Yes , thr sprayguns are also great to use. Started using them this year. Lph 80, w 400 spray so well. Thanks again for another great video Rob. Great chatting with you today mate take care...keep on bringing out that great material!! Cheers 🤘🏽👍🏽your friend across the pond..
Same goes for you Jc if you ever get to hot where you are come over to the UK 🇬🇧 and freeze 🥶🥶 thanks for all the support with the channel much appreciated 😀
I have been disappointed with my version of this. The trigger button can dislodge and it clogs up a lot compared to other brands I have used. Not impressed. My opinion.
Thought you were sending me a quick release bro ??? Glad I didn't hold my breath . Would have turned blue and ended up in my local cemetery 😂😂😂 joking aside bro good vid cracking information love watching sensi doing his thing. So glad Mr c hooked up today great guy will speak soon bro the D man 😄😄😄
I prefer the wrench (spanner) that comes with the iwata cleaning kit then the one that comes with the brush,broke my fluid nozel with that wrench 🤦🏻♂️
@@dredfxcustompaint ok great thanks for the reply. I pulled the trigger on the HP-C Plus, should be delivered tomorrow and now I can't wait. Gonna keep the HP-C at home and put my Revolution CR in my portable setup with my new 32 psi compressor, also coming tomorrow. 👍🏽
Thank you for such an in-depth review and demonstration. I was originally going to buy the Eclipse HP-CS (I'm a burgeoning miniature hobbyist) but this seems worth the extra cash. All the best.
Hi Rob (I knew you were Rob from the comments :D). Yesterday I got my first Iwata, an eclipse hp cs and really like it. I have used a Paasche before that and it is a great airbrush too, although it was a bit awkward using the Iwata for the first time since the pressing distance in the trigger is much less than on the Paasche. Still, didn't affect after I started painting. I want to say I really liked your video and the little maintenance routine with new airbrushes too. I did not find my needle to be so dirty as yours but there was indeed some dirt on it. I used alcohol and createx airbrush cleaner though since i dont have fast cut plus. Cheers!
I've used the plus and it's great, but my workhorse is my original HP-C that I've had for 20 years. Replaced the nozzle once, and a couple of needles. It's a fricking power house.
Yes cannot agree more iwata airbrushes rock
great review and very nice brush 👍👍👍👍👊🏻👊🏻👊🏻👊🏻
Cheers for the review just got myself one of these. Can't wait to use it!
It's a great brush 👍 especially if your paint it a little bit thicker 😉 brilliant trigger good build
Thanks for the feedback much appreciated enjoy your new brush
I like that painting in the back with the lady glasses and lowrider
Thank you gillbert g here you go thats how I did it
czcams.com/video/dRvJcfbwuGw/video.html
Interesting review Rob and it looks a nice airbrush (not that I know anything about them 😁) you cant go wrong with Iwata as they are a big brand and put out good quality spray guns.
I might be in the market for a new full size gun, I fancy something different and a change to my DV1, I was looking at the Sata X5500 RP 1.2 I setup but not sure as yet 🤔🙏👍
Saludos amigo Rob. son muy buenos tus consejos, nos ayudan para sacar nuestro proyecto adelante si no es molestia nos puedes dar cosegos de precisión de aigre para el Ariografo te lo agradecería mucho un fuerte abrazo pará ti y tu canal 👏👏🤗👍🇲🇽
Great vid Rob. I have the 50th Anniversary HP-C and I love it. Proper workhorse brushes and like you said, fantastic quality.
Yes mate iwata now what they are doing when it comes to guns
I want one of these thanks for sharing
Nice review Rob. Did you go for the HP.CPlus over the HP.CH because of price? They look like the same airbrush except for the mac valve on the latter.
I got a really good deal on two brushes off a friend so couldn't say no
I have just subscribed to your channel. Great info and tutorial👍 i have just orderd this iwata airbrush. But can you swap out the needle for a smaller type rather then having to use a different airbrush, say a 0.2 mm for even finer details ?
I think you can have a look on airbrushes .com on the parts list 👍
I have had a new one of these sitting in my room for 5 years now. I guess I will break it out
I've got a couple of similar older Iwatas and the tiny internal O ring that the needle glides on is old and hard and the needle won't glide thru. I have some replacement O rings and have stripped the entire brush down, but can't see a way of removing the old O ring and replacing it since its so tiny and impossible to get at. So whats the method for doing this? Thanks
Great video mate...if you ever get tire of the cold weather come to 🇺🇸 and be my neighbor and bring Dean along😂 or if you just want to visit, mi casa es su casa...😃 ...you are absolutely right about the instant response about trigger on the Iwatas. Yes , thr sprayguns are also great to use. Started using them this year. Lph 80, w 400 spray so well. Thanks again for another great video Rob. Great chatting with you today mate take care...keep on bringing out that great material!! Cheers 🤘🏽👍🏽your friend across the pond..
Same goes for you Jc if you ever get to hot where you are come over to the UK 🇬🇧 and freeze 🥶🥶 thanks for all the support with the channel much appreciated 😀
@@dredfxcustompaint 😂will do mate..sometimes is okay to 🥶
@@coolkids2064 yes but here it seems to be all year round 😆
@@dredfxcustompaint 😁 well well that I will have to really think about it🙃🤘🏽👍🏽
I think it's going to be easier for you to come to ga 😁
I have been disappointed with my version of this. The trigger button can dislodge and it clogs up a lot compared to other brands I have used. Not impressed. My opinion.
Which one do you prefer?
Thought you were sending me a quick release bro ??? Glad I didn't hold my breath . Would have turned blue and ended up in my local cemetery 😂😂😂 joking aside bro good vid cracking information love watching sensi doing his thing. So glad Mr c hooked up today great guy will speak soon bro the D man 😄😄😄
What's going on Dean Man
@@coolkids2064 All good Mr c 😄😄
@@deanbrown7643 when you going to start uploading comedy videos?
@@coolkids2064 when me and Rob hook back up bro he's real good fun and brings out my sense of humour 😂😂😂😂
@@deanbrown7643 dynamic duo😂🤣😅
I prefer the wrench (spanner) that comes with the iwata cleaning kit then the one that comes with the brush,broke my fluid nozel with that wrench 🤦🏻♂️
Yes they are fiddly little things it's very rare I take the nozzle out on the iwatas
Which would be better for models, this or the hp CS? Thanks
There won't be much in it when it comes to spraying and the Cs comes in cheaper 👍
Where did you get that BIG air brush on the wall ;hanger / stand
Hi Mike cheek here you two links for you czcams.com/video/lGN50iAlo7o/video.html
czcams.com/video/_ya2AAaRVxM/video.html
Is there much of a difference between the HP-C Plus vs Eclipse HP-CS? Im torn between the two after using the Revolution.
I don't think you would see that much of a difference between the two on performance 🤔
@@dredfxcustompaint ok great thanks for the reply. I pulled the trigger on the HP-C Plus, should be delivered tomorrow and now I can't wait. Gonna keep the HP-C at home and put my Revolution CR in my portable setup with my new 32 psi compressor, also coming tomorrow. 👍🏽
@@ZeppyCustoms nice one enjoy 😉
The lid of my HP-CP is so hard to remove from the cup, any ideas friends? I can't fill the paint in😭
I'd get some valve grinding paste in that case
Would 3in1 oil work as a substitute for SuperLube?
3 in one is a bit to thin your best bet is the iwata superlube