Making the engine mounts
Vložit
- čas přidán 30. 12. 2019
- In this video I start shortening the engine brackets to allow the addition of adjustable Polyflex engine mounts.
Boelube: www.amazon.com/dp/B00DHMGWFK/...
Polyflex engine mounts: www.polyflex.com.au/
If you are enjoying this channel, please consider making a donation to www.paypal.me/dangarstu or become a Patreon of Dangar Marine at / dangarmarine
T-shirts and other merchandise available at teespring.com/stores/dangar-m...
Common items used in these videos are available from my Amazon store at www.amazon.com/shop/dangarmarine
Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store www.marineengine.com/
All music available at soundscloud.com/dangarstu - Zábava
Watching the news about the terrible bush fires in NSW. Hope you and your neighbours are safe.
I'm a fabricator in the US, so I really enjoyed this video. I use plasma cutters pretty often. For thick materials like you are cutting...I'd just run it wide open and adjust the speed to keep it from blowing back. Also, you are right about running through the end of the work to keep the tip cleaner. Keep up the nice work, and ignore all the safety nuts. In the US, must of us who are self employed and don't have a Safety Manager to watch us, work the same way as you...well, except we wear shoes. :)
Thanks mate. I'll give it a go at max amps next time and see how it goes. Happy New Year! :)
Grinding and welding barefoot. Absolute legend.
I'm afraid to even walk barefoot in my shop yet alone weld barefoot. Amazing and very enjoying to watch. Thanks for sharing.
Love your shop, the equipment may be old but it gets the job done. Basic measuring, cutting and welding, a few bits of escaped livestock. Wait, that's my back yard!
Murphy's Law. Gotta love it.
Thanks for the video.
Hey Stu, that drill lubricant is probably the best stuff you can use. Boelube was invented by Boeing Aerospace for drilling holes in airplane parts. Keep up the good work!!! Oh and one observation....boots man boots....😂😂👍
Always keep a roll of 'keyway belt' on hand, whether ashore or at sea. It will get you home and finish your tasks without having to run to the belt shop. 30 years as a master maintenance Tech taught me that, plus a few decades of sailing and motoring...
I'm definitely going to get some. Didn't know about it before this video.
Here's a good tip for your welding...
Pre-heat your work.
The Boeing Lube helps keep the MIG torch nozzle from fouling. You can also apply a thin film to the work piece to help reduce spatter from sticking. I even put a very lite film on my welding helmet viewing lens.
Will give it a go.
I like the new chuck handle.
Hi Stu, I'm not pro welder but just on the subject of welding I noticed at 8:55 while you were tacking up, you held the welder clamp with both hands. While this is fine is does limit the amount of control over the tip of the rod especially on a new rod. If you try and hold the clamp with your right hand and hold the actual rod with your left hand as close as possible to the weld pole as your glove can take. I find at helps and awful lot. Also being in a comfortable position I find is so important to a good weld. Keep up the great work Stu. Love the project
"Tell ya story walking" one of the great aussie quotes, wonderful to hear it...
Stu, I standby the statement that since you do use amazon that you should create and share in your video description a Amazon Wish List for you. So we can buy things you need and have them shipped straight to you. The list works well and if you set quantities you need it will tell us how many of each item you need and how many have already been purchased by others. It’s very easy to set up and links areas readily available to make shareable.
Thanks Jeremy, I will look into that. I just feel awkward about asking for stuff. I'll add a drive belt to it though. ;)
Dangar Marine well I don’t look at it much different then Patreon. You essentially have business of putting out video. Some people show support on Patreon and others can in other ways but I indefinitely understand what you’re saying.
Like me I was thinking going to give you that Detroit Tune Up kit while you were in the States a few months ago. It seems people send you packages from time to time like Dan who sent you drill taps. Not a lot of difference except that it might save us overseas viewers some shipping costs if Amazon has it in the AU.
Even if you don’t plug it in your videos and just add a link to the description.
Once you set it up then show Damian and Jess from project Brupeg next time you see them. They apparently don’t understand Amazon. Maybe give them a little assistance. Since they are proudly community funded it seems that giving people another way to support might be helpful.
Have a great 2020
Jeremy K
Seattle, WA USA
Hi Stu, nice looking solid mounts. Looks like they pivot a bit too. Some of the angles on the old ones must be there for clearances inside the engine bay. Hopefully it all hooks up well when lowered into the boat. Wouldn't want to hold up the crane guy for sure. Love the chickens. My mom raised them when I was little and would go with her to the feed store. Loved the smell of the animal feeds
Thanks Tim. I figure even if it doesn't all fit perfectly I should be able to let the crane guy go and deal with it insitu. Animal feed is a nice comforting smell. :) Happy New Year!
8:44 Stu grinds with safety glasses, ear muffs & mask. Stands barefoot while doing it. Do your thing, Stu. One of my favorite channels.
"Grinder and paint made me the welder I am." That cracked me up. So true.
Same motor mounts I use on my 540 CI V8. With a 620 hp engine they have been totally reliable over the past ten years.
That's good to hear Roger. :) Happy New Year!
As a Temporary fan belt for your drill press.Steal one of you ladies stockings,my dad always kept them in the boot of the car just in case a belt snapped when we were out in the bush in Zimbabwe.All the beat to you for 2020 love that Detroit engine.
How did he explain the knickers and hi heels
@@sukalanger LOL if there were any hi heels he must have kept them hidden behind the spare wheel.
thanks Stu.last one this year,awesome as always.Love the pigeons
8.45 - Good to see you wearing your best welding/grinder undies - saftey 7th!
They were my special welding undies. Never failed me yet Steve!
Just remember to use stainless steel nuts and bolts everywhere. Nice job. Love your videos.
Hi Stu
With regard to any “solid” lube, they work best if you dip the drill bit into them and fill the flutes. That way, as the bit heats up, the lubricant flows down into the piece you are drilling helping to keep everything cool and.....well.....lubed.
Cool, I'll give that a go.
The engine mounts look good and strong, so you should be ok as long as the angles fit up right. You may need to make some tapered wedges to fit under the flex mounts to align the prop shaft to the engine. It won't be long till she is in the engine room.
Yes, it will be interesting to see how the alignment goes but where there is a will there is a way.
I hope that you are keeping safe what with all the fires across Australia. I know that Australia is a big place but the pictures and videos are scary to see from the U.S. Make sure that all your animals have a safe haven.
It is amazing on how many people are not working when you want to work.
For sure.
You can't beat polyurethane mounts. Happy new year Stu and fellow subscribers
Happy new year!
2 things I've found helpful in my welding projects: 1 you can get magnifier lenses for your welding helmet (so you don't need magnifier glasses also) and 2. Get a 7" or 9" grinder! Working with thicker metal, a 4 1/2" takes forever!
For sure, the big grinder makes a big difference. Just bought some new disks for mine yesterday.
Thanks for the Amazon tip Stu, I'll save your store and then just go buy stuff from other places too. Like the safety specs too.
Thanks mate!
Happy New Year, Stu! Nothing better than a Dangar Marine video to start the day! :)
Even a very small pilot hole would make a big difference to your hole quality (roundness, finish, location...), and would be easier on your press. Keep in mind that the center of the drill is not turning as fast as the outside edges. Matter of fact, the exact center isn't turning at all relative to the metal. Without a pilot hole, you're trying to push the tip thru the metal, requiring significant force. A small, perhaps 4mm dia, pilot hole would help a lot. No need to step up, just go 4mm then 18mm.
Keep up the great work, sir!
Yes, I'll try experimenting with different size pilot holes to see which works best on the next ones. The other thing I like about no pilot hole is that you can fill the start of the hole with lube and it won't just run out the pilot hole.
Gas bottle under the plasma cutter? Love it!
What about the bare feet! lol
@@daedster1 bare feet, he had plastic wrap on the counter to cover his feet, at least that's what he commented on in another vid, haha!
@@danieloliver20 lol
I just got some of your T-shirts in the mail last week. That I ordered before Christmas. Absolutely love them.
danger Marine notification popped up 50 seconds ago, I'll bring the rubbish in later, lets see what stu has been upto.......
The most important feature of mounting your engine is a collision block. This protects the engine from moving if vessel collides with a dock or another craft. Usually it looks like a large flat triangle about 4mm from front of strongest part of the engine at the base.
Interesting, I'll look into ways of adding that.
Also known as rake and ramming stops. Rake for when you get hit from behind and ramming for when you run into something.
You didn’t need them with solid mounts, but you may now with flexible mounts.
Happy new year to Stu and his family, and to all the viewers of this great channel.
Happy New Year!
See 'ya next decade! Oops, already the new decade there, only 6am on the 31st here in San Diego.
Thanks for all the great videos!
RichE
Thanks mate. Happy New Year! :)
I also loved the part where, exposing a knackered 30-year-old drive belt that probably should have been changed a few years ago, you start philosophising about how things always break when you need them most. Just priceless. Have a great New Year Stu :) Look forward to more of the same in 2020...
Happy New Year!
once you get the puddle correct try and concentrate on keeping an even speed and correct angle, trying to react to fluctuations as you see them usually just puts you behind the 8 ball because your reacting to stuff thats already happened, it may feel counter intuitive but it produces better results. its especially noticeable with TIG welding but applies to all processes including oxy and plasma cutting. once worked with a bloke who used a piano timer to time the dabs when TIG welding.i use much faster dabs so it wasn't for me ,but it worked well for him he got very nice results.
Interesting, thanks for sharing that, it does make sense.
Those safety shoes again when grinding 😲😲 You should provide a disclaimer on safety 🤣🤣
I’m happy that I am not alone there’s 85 other people with nothing to do New Year’s Eve but watch stu weld engine mounts anyway happy new year stu to you and your family love your videos always learning thanks pal
Ronald Smeaton we are plenty, happy new year
Now there are more like 1,800 folks with nothing else to do on New Year's Eve.
Happy New Year!
Gotta love bonus parts, really wanna mess with someone in the shop, put a thrust washer on someone’s bench when they have a transmission apart, preferably when they have it almost together and they take a restroom break! Guys used to do it to me, at least they’d tell me before I’d start taking it back apart to see where it’s suppose to go,
Cruel!
Hi Stu, just finished watching Brupeg latest when you popped up. Engine mounts look awesome, really robust and well made. Thanks for sharing and all the best for the coming year. Stay safe and keep up the good work. 👍🖖🐶🦴🐔😎🛥⚓
Thanks mate. Happy New Year!
Nice job stu
good to see health and safety taken into account when grinding above the gas bottle then welding in shorts and bear feet. Looks like our workshop on a Saturday
I did have my safety undies on though ;)
Excellent drill press chuck key valve mod. Happy New Year to all.
Spent many years as a welder, aside from grinding rute passes we only ground two types of welds. One that was in the way and those that looked like a dog turds
Hint , when you drill an angle positioned as you did at 16:20 on, use a thin packer under the area being drilled to fill in the gap produced by the radius of the internal corner of the angle, or alternatively chamfer off the corner of your wood block so the angle sits flat on your block
Yes, it would be nice to do something to make it sit more steadily while drilling.
Happy New Year to you and yours Stu, may the new year hold many blessings for you and those you hold dear.
I started learning stick welding in 1972 in high school. It's one of the skills that has helped keep me employed all these years. AND I still learning new tricks.
At current time I work as a welder fabricator at a quarry but I end up doing many things including running a 5 yard loader or dump truck, or I could be turning a part with the lathe.
It's good to see you trying and learning new skills.
Happy New Year Kriss! I really love learning new things and welding is certainly something very handy to know how to do. Next up I would really love to learn how to use a lathe.
Hi Stu, In the US generator business, we call the rubber bits in the mounts "isolators." It is looking good.
My last chicken died of old age last week; it was a blessing since she was very lonely.
ETA: 8:42 Love the steel-toed work boots! I have an identical pair...work great and cool.
Sorry to hear about your chicken, but understand when it gets down to having only one. They do like company.
Stu: With resilient mounts, when doing the shaft alignment, you need to account for the mount deflection caused by the weight of the inboard shaft end, so that the stuffing gland is not required to act as a bearing. The mount company should be able to give you a procedure for doing this. Basically it involves centering the shaft in the stuffing gland and adding weight onto the end of the gear to mimic the shaft weight so the mounts deflect the right amount, then aligning shaft to gear, and then removing the weights and the shaft gland centering support. Greg
Great vids mate, keep them coming! We need more!!!!!!!!!!
Thanks Pete. :)
love the site.but really no shoes in a work shop.
its only going to end in tears.
keep the good work up am learning alot from you
Great video mate, but hey man it's well past spring cleanup time. Your oh&s work place is a bomb waiting to happen. Plus love your work boots mate.
Pilot holes make the work easier, less stress on equipment and quicker cutting.
I grind my own bits, and the edge will last longer with a pilot hole.
The harder the material, the more you need a pilot, mild steel may allow for a one shot drilling process, but, harder material will not be so easy.
For fabrication, they make magnetic 90deg angles to hold stuff in the correct alignment for tacking before welding.
They are about $15. There are different size ones too.
They sre the type of tool that you wonder how mankind ever progressed without. Any welding supply or often steel supply places have them.
On your drilling and pilot holes, for small sizes like 3/4, just do one small pilot drill the same size as the chisel point of the drill (the bit that doesn't really cut). Drills only grab when the step up in size from pilot to final is too small.
Happy new year to you from an old sea dog still in the old year.
About your drill press, mine is same type and I use home made belt dressing made out of pine resin and meths to prevent belt slip and thereby increase belt life.
Original belts are poor and are easily damaged when changing speeds so make sure enough slack. Rounding off the sharp outer edges on pulleys is also advisable. Suggest you drill at lowest possible speed and apply coolant but these drill presses tend to slip belt unless you apply belt dressing. Looking forward to see test run of boat.
Nice idea, I'll try that with the new ones.
Having personally rebuilt a few Jabsco pumps for marine use The "extra" part may be for a sister (similar) model that you don't need for yours. Check with your supplier or Jabsco directly. I've been running in the Saint Clair river bordering Michigan, USA and Ontario, Canada for the last 50 years and seen this type of thing before.
Yes, I have noticed quite a few kits come with parts to cover multiple models so not all bits are need for an individual pump.
Heya Stu, love the chicken updates, gotta keep us in the loop on how the girls are doing. Great tips on the plasma cutter and welds as well, getting into a bit of that this year myself and it's nice to learn from others!
Happy New Year mate.
Thanks Michael, great to hear you are going to be getting into your own metal working. Will do some updates on her progress. :) Happy New Year!
Stu, awesome channel! I found you about two months ago and have been catching up on the trawler restoration. Wow, I thought rusty car restoration was crazy. Keep up the good work and Happy New Year!
Thanks Ken, Happy New Year! :)
I love that you do all your hot work in shorts and bare feet. Happy new year Stu!
Happy New Year! :)
I am not a welder but it’s interesting to see how you are developing that skill It’s something I am wanting to learn
Stu, if you sit Dottie in a pan of cold water for a couple of minutes every day it will reduce the broodiness. Should only take a few days to cool her down and she'll be back to normal... great vid, by the way. Happy NY.
She's come good now but next time! Happy New Year! :)
Cheers Stu, have a great night tonight
Thanks Rupert!
That was fun! To avoid delays like the drill press belt, I buy an extra one for items like that, so I’m ready next time. Important to write what the extra belt goes to when you store it!
For sure, having the part is one thing, finding it is another!
Bookmarked your Amazon page for my future purchases.
Thanks Tony! :)
Wonderful to watch your journey, thanks for sharing!
That valve key fluffing rocks!
Thanks mate. Nice back reference. :)
Great tip on Amazon link. I shop on there all the time. Now I will just visit your site first
Stu’s next video title ! “ Why I spent New Years 2020 in emergency “. I’m a boilermaker and I will never weld or fabricate in bare feet, I get enough burns there even with boots
Well he did have a grinder bite him in the shins in another video.
Happy New Year from Denmark :)
Happy new year Stu and keep the videos coming, checking for new ones has become part of my daily routine
Thanks David, happy new year!
Stew Love your chuck key
Aerospace industry "That's me." LOL
Looking forward to seeing the install and i use that lube all the time but with smaller bits try dipping the bit in it works pretty good
I'll give it a go.
Your new drill lube and a much slower speed for that large drill will do a much better job, I was taught " larger the bit, slower the speed" Love your videos, hope you are safe with the fires!
And I thought I was the only "learn as you go" guy out there crazy enough to work on their own boat stuff!!!! Taught myself how to wire weld and do steel work on my boat trailer this year...Thankfully it's gone GR8! Love your work m8 and have learned a lot from ya. Will be happy to use your store for all my Amazon buys this year! Happy New Year! Cheers from the states! :)
I think learning as you go is half the fun! Thanks for using the store, Happy New Year! :)
See ya next year Stu. Boat is coming along nicely.
Thanks mate.
Happy to say I spent my new years with my favorite aussie, sorry Damian
LOL. Don't worry, he's a Kiwi. :)
trick to learn when doing right angle welds. Weaving rod side to side just a little bit creates a much nicer weld. Another one is to angle the rod to either the thickest piece OR to the one going vertical a bit. When welding on something with a downhill angle I like to start at top and push the weld back into itself as I go. Seems to work well for me.
Yes, I think it would have gone a lot better that way, I really did have the wrong rod angle on the first one.
Hi Stu, hope you had a safe and happy New Year. We can see the smoke building outside, stay safe with your fire fighting, as of Jan 1. Five states of Australia are alight and the authorities have admitted there is no hope of putting them out before mother nature wants them out. Be extra careful this Friday, another 40 Deg C day with high winds.
Definitely has been bad fire weather. Happy New Year!
👍🏻 Wishing you and all there a peacefully prosperous 2020.
Happy New Year! :)
I use Boelube a lot as being an AMT. When you use it take out what you need to use for the job your doing so you don't contaminate the whole jar.
Great mounts! Happy new year, cheers!
Happy New Year Stu and co, thanks for a compulsive channel. Hope you are safe from the fires.
Thanks Trevor, currently safe but it has been very bad fire weather lately. Happy New Year!
If you are going to be doing larger holes get a Annular cutter with a Morse taper adapter
It's all coming together😎
Slowly but surely!
Hey Stu, I was wondering, How are the people close to your island making out with those fires? I have been following this and just feel terrible about the loss of homes, peoples business and of course the devastation of all the wildlife. It was a heartbreaking story hearing of the people that were actually pushed to the sea. Our hearts go out to the people of Australia and hope nothing effects you where you live. Doug Smith, San Antonio Texas.
Your making great progress Love your work
Happy New Year, I hope enjoying your project, not so much working on it. The fires look grim from where I sit south of Miami Florida and I hope you and your loved ones are safe. More eddy!
Yes, was a bad day for the fires yesterday for sure. Happy New Year! :)
That lube is similar to Acculube LS-10. I love the stuff. I find it less messy as well compared to using a cutting oil. LS-10 Smells better then oil. It is Vegetable based.
Happy New Year Mate! Always a pleasure watching what you’re up too. All the best.
Thanks Alan, Happy New Year! :)
What a wonderful way to start the new year, with a Dangar Stu video. All the best for 2020.
Happy New Year! :)
Uh oh, the dreaded mystery part! Happy New year Stu! Thanks for taking us along for the ride.
I'm sure Arn just added in to mess with me. ;) Happy New Year! :)
Happy New Year Stu and to all you other subscribers. 🥳
Happy new year Stu!
Love that chuck key stu, got a get me one
He should make some and put them in his store. Sell like hotcakes I bet.
Happy New Year.. lots of fun watching the great work.. Thanks Stu from Metlakatla BC Canada
Have a great new year Stu!
Happy New Year! :)
Happy New Years to you and yours!
Happy New Year! :)
Happy New Year, Stu. Thanks for all your hard work in 2019. I hope you remain safe from the awful fires which we see in the Melbourne and Sydney areas. Good luck.
Thanks mate. Happy New Year!
Happy new year from Slovenia to you and your family. Cant wait for new videos in next year.
Happy New Year! :)