Man. I just stumbled upon your channel. I see this vid is 2 years ago. I hope you’re still making holsters. I get my Canik mc9 in a few weeks and would love to get a plus one appendix rig. Love the craftsmanship and details you pay attention to
We are! Andrew isn't alone in his basement anymore though... we are 6 employees deep in a warehouse! Wed love to make you some gear. hillikerholsterco.com/
@@timmygunz7103it does, but the holster isn’t compatible with light attachments and it isn’t NEARLY as good as these holsters. The canik holster has two clips built in and is very long and uncomfortable. It’s like they put it in there, “just because” 😂😂
Thats clean... I made a Boltron Ghost holster for my GFs LCPII, its dual layered with a Chameleon tint inbetween. Shimmers between green and blue but is a transparent purple looking through it. Complements the LCPIIs Teal anodized slide nicely.
Hey man love the video! I have a few questions if you wouldn’t mind answering. So I am planning on getting into holster making and I would love to make a holster like this. I just finished making my press and I went to source some hardware but there are so many different sizes and lengths on everything. Can you let me know what size hardware you are using for this holster? Also is it possible to make this exact holster without a vacuum press and the forms? Thank you!
Hey what's up my brother love your work and your entrepreneurship Quick question I have A Walter PDP full size with a trijicon RmR and olight Baldr Mini Light laser combo And I also have A FN509 tactical trijicon RmR With the olight baldr pro tactical laser combo how much for eash holster all black inside the waste with an without mag holders?
thanks for the tuto and explanations its very helpfull 👍🍺 how many minutes do you let the kydex heat up and soften? nice and easy make it simple and helpfull 🍺
Good morning bro from Athens Greece. I have some questions like 1.How much it cost to build something like this for cz sp 01 shadow 2. If you shipping over seas Very good iwb holsters very good job..
Hey! Unfortunately, we don't currently accommodate that specific model. We plan to add lots of new stuff this year so we will get it on our request list.
Do you make that same holster for a 191 kimber ultra carry 2? Doesn’t matter the color. I can’t find one that has a sidecar for this particular pistol.
If I get the rig with the xtra mag can I take the screws from the extra mag and put them on the holster to rock by it self just new to holsters lol but it looks like it does
@@hillholsterco thanks ordered one from you guys with the plus one mag a couple of days ago was going through vids and that thought came up! Thanks for the quick response!
yes, you are right "Kydex " is made by Sekisui SPI, and comes in a variety of colors, but it is not the only thermoplastic available, Since you are doing clear panels on some of your holsters i was merely suggesting that buying the same material in large sheets since you have a production facility would save you in supply costs and improve your profit margin. If you want to claim that your product is 100% Kydex go ahead and pay the extra money.@@hillholsterco
Kydex is actually the brand of acrylic plastic - the industry has just coined it as the actual material name (it is not). The kydex brand does not make clear sheets specifically - this material is made by Holstex
I cant wait to receive my Plus One.
We appreciate your support and we know you are going to love it 🤙
Man. I just stumbled upon your channel. I see this vid is 2 years ago. I hope you’re still making holsters. I get my Canik mc9 in a few weeks and would love to get a plus one appendix rig. Love the craftsmanship and details you pay attention to
We are! Andrew isn't alone in his basement anymore though... we are 6 employees deep in a warehouse! Wed love to make you some gear.
hillikerholsterco.com/
Im pretty sure all caniks come with iwb holster and other goodies
@@timmygunz7103it does, but the holster isn’t compatible with light attachments and it isn’t NEARLY as good as these holsters. The canik holster has two clips built in and is very long and uncomfortable. It’s like they put it in there, “just because” 😂😂
AMAZING ! I needed a holster like this in BRAZIL !!!
Thats clean... I made a Boltron Ghost holster for my GFs LCPII, its dual layered with a Chameleon tint inbetween. Shimmers between green and blue but is a transparent purple looking through it. Complements the LCPIIs Teal anodized slide nicely.
this holster is FIREEEEE bro. Well done.
Thank you that means a lot! 🤙
This is literally a work of art 🔥 I’m in need of a holster for my Shadow systems CR920 and I definitely want one of these bad boys.
We can take care of you! 🤘
Agreed man. That turned out bad ass!!!
🙌🏻🙌🏻
What a nice holster!! It looks sick
Thanks! You can definitely do some cool color combos with the translucent material!
Dust collection ports and a shop vac would save you a lot of time
We have since moved into a larger facility that has all that!
very cool@@hillholsterco
Sick video! Super glad I ordered one from you! It’ll be my wife’s bday present hehe can’t wait to see her put it to use!
This was super dope to watch. Thanks for the insight bro
Thanks for watching! We need to update this video as a lot stuff has changed!
P320 Plus One’s pleaseeee 🙏
Side note: I have family in Elkhart. Stay warm up there!
We plan to add it soon. We are trying!
Im impressed,,returning customer interested in this very holster,,any chance you can do a springfield armory xdm10mm compact?
Great video and great work Sir! I'll be picking up a CR920P soon and will be looking to you for a holster.
I'd love to make you some gear!
Please add a holster for IWI Masada slim.
Thanks!
Too nice! On the paracord, how do you tie them or join them together on the backside without it coming apart? Thanks!
What are the guides you were using on the band saw and router? And where did you get the molds?
Hey man love the video! I have a few questions if you wouldn’t mind answering. So I am planning on getting into holster making and I would love to make a holster like this. I just finished making my press and I went to source some hardware but there are so many different sizes and lengths on everything. Can you let me know what size hardware you are using for this holster? Also is it possible to make this exact holster without a vacuum press and the forms? Thank you!
Sick!! When will you guys have these for cz p10???
May be a little while but it's in our plans
Can you make a plus one holster for a hellcat RDP with light TLR6? I’ll buy one in a heartbeat when you do.
Not yet but we should add some light bearing options as time goes on!
I was gonna say the same, but do you guys have one for the hellcat RDP available already and if so what’s the link plz
Hey what's up my brother love your work and your entrepreneurship Quick question I have A Walter PDP full size with a trijicon RmR and olight Baldr Mini Light laser combo And I also have A FN509 tactical trijicon RmR With the olight baldr pro tactical laser combo how much for eash holster all black inside the waste with an without mag holders?
What is the vaccum press your using?
Man I wanna make holsters so bad any tips for someone wanting to get started in the industry?
Can you do more of these videos
Man I need one bro lol
Let's make it happen 🤘
I Need A Polymer 80 Holster One For My 43 and One For My 26 I Would Pay Extra For A Custom Molded Holster
We unfortunately don't do customs
Can you do a clear Kydex for a M&P Shield 9 Plus? If so, what would it cost?
Make an holsters for the baretta apxa1?
thanks for the tuto and explanations its very helpfull 👍🍺
how many minutes do you let the kydex heat up and soften?
nice and easy make it simple
and helpfull 🍺
We do between 385-390 degrees for 100ish seconds. Every heat press will vary!
@@hillholsterco thank you very much for your answer I will test step by step I am no pro of kydex
Good morning bro from Athens Greece. I have some questions like 1.How much it cost to build something like this for cz sp 01 shadow
2. If you shipping over seas
Very good iwb holsters very good job..
Hey! Unfortunately, we don't currently accommodate that specific model. We plan to add lots of new stuff this year so we will get it on our request list.
@@hillholsterco 👍🇬🇷Thanks for quick response!!! Be well!!
FWIW: dirty room=fire hazard.
Motorola Jedi Holster? Motorola Saber Holster? Motorola AXP holster? using the belt clip as a locking device.
When are you going to start carrying holsters for Glock 29/30. I need a holster for a real man’s EDC
Did you make those molds? If not where could i find some and what's the thing called you used to heat up your kydex again
Where can I get those white molds that that are precut to the the holster design?
Espetacular parabéns 👏👏👏👏👏👏😍😍😍😍😍
Do you make that same holster for a 191 kimber ultra carry 2? Doesn’t matter the color. I can’t find one that has a sidecar for this particular pistol.
Not in our Plus One config yet
Would a shop vac work for the suction part of the vacume molding part
I also watched to the end and subscribed please let me know
@@tac-tec We have seen it done before but not 100% sure how the hookups would work.
If I get the rig with the xtra mag can I take the screws from the extra mag and put them on the holster to rock by it self just new to holsters lol but it looks like it does
Yes! You can disconnect the shock cord and put the second J hook on the firearm side.
@@hillholsterco thanks ordered one from you guys with the plus one mag a couple of days ago was going through vids and that thought came up! Thanks for the quick response!
@@KayoMonei for sure! If you have any other questions you can reach out to us via email and we will help you out 🤘
@@hillholsterco ok cool thanks! I’ll be sure to do a review vid after I try it out!
Does it show dirt a lot? Holsters get awfully dusty inside
It did show some dust, but every holster does like you sakd. We don't offer the clear anymore
@@hillholsterco I very much appreciate the honesty!
Where do you get the molds from?
@@EDC3DP we make them
Plastic sheeting from Lowes or Home Depot?
Can't buy kydex material at a big box store. Speciality plastic vendors or wholesalers
yes, you are right "Kydex " is made by Sekisui SPI, and comes in a variety of colors, but it is not the only thermoplastic available, Since you are doing clear panels on some of your holsters i was merely suggesting that buying the same material in large sheets since you have a production facility would save you in supply costs and improve your profit margin. If you want to claim that your product is 100% Kydex go ahead and pay the extra money.@@hillholsterco
Do you make level 2 or 3 holsters?
We do not
So does Kydex itself not come in clear sheets?
Kydex is actually the brand of acrylic plastic - the industry has just coined it as the actual material name (it is not). The kydex brand does not make clear sheets specifically - this material is made by Holstex
@@hillholsterco the things I find out about oh CZcams...appreciate taking the time to respond!
Made for me to gun CZ P10 C???
Yes we can do that! You can build one here: hillikerholsterco.com/collections/iwb-holsters/products/plus-one-appendix-holster
Do you make a light bearing holsters
Yes for some setups - what are you looking for?
@@hillholsterco canik tp9 elite combat
@@hillholsterco canik tp9 elite combat with a olight pl mini2 or baldr RL
@@hanzalahbadat3081 I can do the compact elite with the pl mini2 in our signature IWB!
@@hillholsterco ok thanks but I got the combat
Day 4,957 of asking for a holster for the Girsan Regard MC!!! 😂😂😂🤣🤣 Much love brother, I appreciate your content
Day 7,920 of me saying "someday" 🤣
How i want to buy
hillikerholsterco.com/
Hi how much cost for Pakistan
I follow you on Reddit. Anyway yo get that smoked?
G19 with X300 wml holster?
Hey! We can do one of our signature IWB's , but not in our Plus One setup yet.
I’m the 91st comment I win a free holster 🎉woo woo