Directions on how to fix that annoying beeping sound on the whirlpool duet how to unlock the door how to clean the trap what to do when water won't drain
Thank you for this video. A few things that might be helpful for others - the error codes are the number of times the Wash flashes (that is the F part of the code) followed by two seconds and then the number of times Wash flashes again (the E part of the code) followed by 5 seconds, and then it repeats. In my case, the manual had been stored in that bottom panel (apparently this is common?!) and while we did find a sock (!?) and other gross stuff in the drain, so I'm glad we cleaned it out, that was not the problem. In my case, it turned out that one of the blocks had fallen off the washing machine and snagged a wire on the water temperature sensor. We (all credit goes to my spouse) to fix it and now the machine is working again.
Thanks so much for actually giving us an answer!!! My machine just did this as I was running a cleaning cycle because the last load I did didn't remove as much water from the clothes as it should have... I hope that this is what is wrong with the machine
If you really want to finish the cycle when it starts beeping and you have clothes and water in there, press the power button first when you hear the beep, this should hopefully drain automatically and unlock the door after. If not, then you can also power cycle the machine by unplugging it from the wall and waiting 2 mins and then replugging in and running it on cold water. Don't do warm or hot because like one of the comment here suggests, your water temperature could have been broken as well but cold water will always work regardless. This way you can atleast finish that load before you start troubleshooting. Great video btw and yeah horrible horrible design on whirlpool's part. The way to open that thing needs 2 people and in my case, the dryer was stacked on top so imagine tilting the whole thing just to open some screws.
wow! I did not know that came off,, I will try it, just cleaned out the trash, did not know you could un-connect it from the back good point! I will try it and let you know
I'm thinking about buying a top loader we have a front loader it's really heavy and the plug is in the back and our laundry room is real small so we have to put outside to fix 😢
@@jensiran7969 no, and I'm lucky it's the landlord's so she replaced it.it could be several issues and unless you know for sure you're just throwing money at it.my guess, its a bad pump.cheap and easy to replace.
Thank you for this video. A few things that might be helpful for others - the error codes are the number of times the Wash flashes (that is the F part of the code) followed by two seconds and then the number of times Wash flashes again (the E part of the code) followed by 5 seconds, and then it repeats. In my case, the manual had been stored in that bottom panel (apparently this is common?!) and while we did find a sock (!?) and other gross stuff in the drain, so I'm glad we cleaned it out, that was not the problem. In my case, it turned out that one of the blocks had fallen off the washing machine and snagged a wire on the water temperature sensor. We (all credit goes to my spouse) to fix it and now the machine is working again.
That's great! Thanks for the additional info 😇
Thanks so much for actually giving us an answer!!!
My machine just did this as I was running a cleaning cycle because the last load I did didn't remove as much water from the clothes as it should have...
I hope that this is what is wrong with the machine
If you really want to finish the cycle when it starts beeping and you have clothes and water in there, press the power button first when you hear the beep, this should hopefully drain automatically and unlock the door after. If not, then you can also power cycle the machine by unplugging it from the wall and waiting 2 mins and then replugging in and running it on cold water. Don't do warm or hot because like one of the comment here suggests, your water temperature could have been broken as well but cold water will always work regardless. This way you can atleast finish that load before you start troubleshooting. Great video btw and yeah horrible horrible design on whirlpool's part. The way to open that thing needs 2 people and in my case, the dryer was stacked on top so imagine tilting the whole thing just to open some screws.
wow! I did not know that came off,, I will try it, just cleaned out the trash, did not know you could un-connect it from the back good point! I will try it and let you know
Nice fix. It would have taken me forever to figure it out. Thanks.
I'm so happy it worked for you😇
THANK YOU FOR THIS!!!❤❤❤ I thought I broke the washing machine again :3
Ty
Exactly what i was looking for, thank you
Glad I could help 😇
Definitely helped and saved me time and money 👏🏽💙🙏🏽
Love your video
Now I’m understand the beep sound
Glad it helped❤
I'm thinking about buying a top loader we have a front loader it's really heavy and the plug is in the back and our laundry room is real small so we have to put outside to fix 😢
Thank you so much !!🎉
Thank you !!
Thank you so much for this
You're welcome!
Thank you!
Thank you very much 😊
My pleasure!
It worked!
Thanks for checking out the video. I'm glad it worked for you!
Thank you
Glad it worked! It takes a village😇
Thank you, it worked
Awesome!
Awesome!
What did you use to take the bottom part off?
They're 2 screws at the bottom. I point it out in the video. Good luck!
I used a wrench bit from my power drill I think that’s what you were asking?
Mine still beeps even after that
Mine too
Go Chiefs
Did all that and it still wont run.
Have you figured it out, because I am still trouble shooting as well.
@@jensiran7969 no, and I'm lucky it's the landlord's so she replaced it.it could be several issues and unless you know for sure you're just throwing money at it.my guess, its a bad pump.cheap and easy to replace.
The number of beeps indicates what's wrong. Look online for the troubleshooting code decipher. Good luck!
@@jensiran7969 The number of beeps indicates what's wrong. Look online for the troubleshooting code decipher. Good luck!
Did you ever figure what was wrong
Get to the point
Thank you!!
My pleasure!
Thank You!
I'm glad it worked for you😇