FREE ESP32 IoT Project | Echo, Smart Home With Google Assistant, Alexa, and Manual Touch Switch

Welcome to an extraordinary ESP32 project that will take your home automation to the next level! In this unique video, I demonstrate how to create an IoT-based home automation system using ESP RainMaker, Google Assistant, and Alexa. With the power of ESP32, you'll be able to control relays through both voice commands and manual touch switches, all without the need for expensive devices. Best of all, I've utilized free tools throughout the entire project!
To bring this incredible ESP32 home automation system to life, you'll need the following components: ESP32 Devkit, an 8-channel 5V SPDT Relay Module, and touch switches.
Ready to get started? Download the complete code for this ESP32 IoT project with ESP RainMaker from the link provided below:
[Download Code for ESP32 IoT Project with ESP RainMaker]
drive.google.com/drive/folder...
Here are some key points to keep in mind:
1. No Amazon Echo device is required for this IoT project.
2. Install the ESP RainMaker, Google Home, and Amazon Alexa IoT applications on your mobile device for seamless integration.
3. Once your ESP32 is connected to Wi-Fi, you'll have control over the relays from any Wi-Fi network.
4. In this video, I guide you through updating the Preference URLs to install the ESP32 board version 2.0.3.
5. Generating a QR code? Simply press and hold the ESP32 BOOT button for 4 seconds.
6. To avoid any potential issues, be sure to watch the entire video for comprehensive instructions.
Please remember to prioritize safety and adhere to proper precautions when working with high voltages.
One of the fantastic features of this ESP32 project is that you can still control the relays even without an internet connection, thanks to the manual touch switches. Once the internet connection is restored, the ESP32 will seamlessly reconnect to the IoT cloud.
Imagine being able to control your appliances from anywhere in the world using Alexa and Google Assistant! With this smart house project, you can transform any appliance into an IoT device and gain full control over the internet.
Now, sit back and enjoy the convenience of asking Google Assistant, "Turn off the lights," or saying, "Hey Google, turn on the lights." It's as simple as that!
Thank you for watching! Don't forget to subscribe, like, share, and leave your valuable comments.
Check out our previous video on touch sensor modular:
• How i made touch senso...
And here's another fascinating IoT project video:
• DIY Bluetooth Home Aut...
Connect with us on social media:
- Facebook: aditya.kanda...
- Instagram: ask_summuroboti...
Stay tuned for more exciting updates on IoT projects, ESP32 hacks, and home automation!
During the ESP Rainmaker tutorial video, I covered the following topics:
00:00-intro
01:06-Control relays with Google Assistant and Alexa using ESP32
03:00-Control appliances manually with switches
04:19-Required Components for this IoT project.
04:34-Circuit diagram of ESP32 home automation project.
05:55-Source codes for the ESP Rainmaker Project.
07:55-Program ESP32 with Arduino IDE.
08:28-Update WiFi details through OTA with ESP Rainmaker.
10:44- Connect Amazon Alexa with the ESP Rainmaker app.
11:20-Connect Google Home with the ESP Rainmaker app.
#iotproject #esp32 #homeautomation #esprainmaker #touchswitch

[@NextGen_automation]

Use preference H for Eeprom memory to remember relay Last State when power cut and restore

[@asksummurobotic]

Thank you for the simple and small suggestion! I appreciate your input, and I will definitely consider incorporating it into my IoT project. It's always valuable to receive ideas that can help make a project more efficient and user-friendly.

[@hameedhaji6759]

When uploading
It says that the file is 156%
To big to upload
Esp32 is used

[@asksummurobotic]

You follow the steps in the tutorial video to set it up after uploading the code.

[@sunderyogi]

Bro where is the pcb

[@asksummurobotic]

I'm sorry, but the previous file had some errors and got deleted. I assure you that I will share the perfected file early once it's ready.

[@GMVRemixMusic]

Please brother PCB design video and PCB Gerber files 😊

[@asksummurobotic]

I'm sorry, but the previous file had some errors and got deleted. Currently, I'm busy working on a new video, but I assure you that I will share the file early once it's ready.

[@asksummurobotic]

Additionally, my autorouter is not working on my computer.

[@balavankulendran1094]

Rainmaker library please bro

[@asksummurobotic]

Sure! You can download the Rainmaker library from this link: github.com/espressif/arduino-esp32. I hope this helps! Let me know if you have any further questions.

[@NextGen_automation]

czcams.com/video/s_DGYsd4T6I/video.html

[@diegodv627]

IT DOESNT WORKS IN IOS I TRIED BUT NOT

[@asksummurobotic]

Thanks for the suggestion, but I encountered compatibility issues on iOS despite following the steps in the video. I will continue to investigate and find a solution. Thank you for your understanding.

[@ifyouwantpeaceprepareforwa4329]

Siniric Inbuilt? Or without siniric?
Can You video code without switch button in Visual Studio code / arduino

[@asksummurobotic]

"Sinric is not used in this project. The video includes code for Visual Studio Code/Arduino without a switch button. Check the description or pinned comment for more details on the code implementation."

[@ifyouwantpeaceprepareforwa4329]

This Code Not Upload On NodeuMCU - ESP 12 E / F

[@asksummurobotic]

Thank you for your feedback! The code in the video is optimized for ESP32 dev module, not NodeMCU ESP-12E/F. Make sure you are using the correct board and adjust the pin configurations accordingly. If you encounter any issues, feel free to ask for assistance, and I'll do my best to help you out.

[@apanoiu]

Where is the source code?

[@asksummurobotic]

In this drive👇
drive.google.com/file/d/1cZ8zL9EmPTZ2Zys-v9oj7tkc7bn0A65J/view?usp=drivesdk

[@shaiksiiq8777]

Bro Rainmaker IOT - free or paid

[@asksummurobotic]

It's free!