Video není dostupné.
Omlouváme se.
Small Welding 🔥 Shop Tour ( 2022 )
Vložit
- čas přidán 6. 08. 2024
- Thanks for watching
For more content follow @amcustomfab
Or on Instagram @ amcustomfab
Find my welders at Primeweld.com
Affiliate links
CNC Plasma table link store.langmuirsystems.com?aff=11
Chop saw ** Link ** amzn.to/3F5QBOQ
Tig welder ** Link ** amzn.to/3G6BMgz
Plasma cutter ** Link ** amzn.to/3q5Tuep
Heat Lamp * Link* amzn.to/3r0HZEa
Small tube bender *Link* amzn.to/338Nd8K
cordless grinder ** Link ** amzn.to/331PJ0J
2:30 ‘but.. oh well’ 😂 I say that a lot!!
The Evolution saw IS a game changer for sure. I absolutely love mine, worth every penny. I love your ceiling mounted sono tubes for material storage. Think I may just try that in my shop. The ceiling is about the ONLY open space left in my 3 car garage shop. Nice video young man 👍🏼👍🏼
Great use of space. There is a saying "Make your shop big because it always gets smaller. Choose your girlfriends small because they may get bigger." I put everything in my shop on wheels so I can move it out of the way if I don't need to use it. If I was you, I would keep my eye out for a used Bridgeport in good condition. It will be your new, best dance partner in your shop. It will pay for itself. I don't miss my fiberglass days. I repaired fiberglass race cars to support my racing habit. I started itching as soon as I saw the rolls of matte in your shop. Nasty stuff.
Thank you for making a well produced video. Maybe you can do an update in a couple years.
Cool stuff thanks for sharing your shop. I got three great ideas from you that I'll make some changes to my garage. Portable bandsaw wall mount, storage for paint cans, and casters or wheels for my portable welding table to roll around, right now I drag it across the floor.
You have a well thought out use of work space.
It's funny your space is almost exactly the same size as my primary space.
I got two 20' containers spaced 14' apart , and the flat roof is made using 16'. X 2.0" x 10." , spaced 12" on center (one foot on top of each container for support). I know it's over kill, but I'm in New England and we can get lots of snow.
Another good video.
Take care Bud.
Very creative and resourceful! Thanks for sharing!
Hey man, great video. I don't do what you do, but you got a lot of capability is such a small area. Good work on the video, sound, and presentation! I'm looking to build a shop, and thats how I found your video.
Thanks for the support 🙏👊😎
Really great use of the space! Some ideas worth borrowing. Thanks for sharing!
Thanks for watching 😎👊
Glad I found your channel, very useful, honest and rational content maker. Keep up the work sir. Have my sub
Thanks for the support 🙏👊😎
Looks good!
yup working small has it's drawbacks but also it's benefits. the benefits are it FORCES one to "think" and be creative with organization. if/when you don't have square footage...? then GO VERTICAL and place stuff overhead, 7ft gives enough clearance for both walking and storage items but also leaves those items just with in arms reach without needing any sort of step stool to access (which would only be in the way 90% of the time).
Looking forward to seeing the video of the bi folding garage door.. I have to build one for an upcoming project
Спасибо за обзор! Уютная мастерская!
Удачи в бизнесе!
I just picked up a buildpro Rhino cart. Love that thing
Awesome man packed a lot of stuff in a small area . I know the struggle I'm working out of my two car garage . Keep up the good work .
Thanks for the support 🙏👊😎
Real nice!
Nice shop - well done!
I have got you beat in the small shop, mine is 10 by 10 , so I have moved my 6 by 4 welding table outside under a clear canopy. We both need a much bigger shop.
Alex -- since I'm new here I'm doing a bit of jumping around. I'm still (carefully) using my HF 14" chop saw and after seeing yours I have to ask what I should think about in an upgrade when I'm ready. Thanks for your help always.
I definitely like my eval chop saws I just got the 355 but I think I honestly like the smaller 380 better
Well they sure look solid and effective. Thanks again@@amcustomfab
Definitely making the most of your space
You have an awesome space.
Great use of 3D space 👍
Regards
Robert
Looks like a nice shop to me. 👍
Nice fab shop and great use of space. Thanks for sharing.
Nice!
Nice shop bro!
Sick small shop
Great video
Cool shop
Hell of a shop young man, well done
Thanks 🙏👊😎
You can also fab up a spray can holder on your plasma table. Pretty sure you can download a ready to cut file off the file share
Found them!
Well done in a small space. Would like a link for your plasma table.
Link is in the description 😎
Just found this channel. Cool shop. I run out of a 1 bay garage. I weld outside. Really like this set up you have. Do you work for yourself?
Just a side gig
@@amcustomfab me too
Bet I know who has the mud truck :)
👍
Alex - me again; when using the evo saw, is there any hazard I should be aware of in cleaning up stray chips with a shop vac? Thanks
They can definitely be sharp. I have a magnet on a stick that releases the polarity that I used to clean up the majority of it and then I do the final cleanup with a shop vac
Nice video and description of your shop. What did you say the magnetic Tig hose holders were called and where can they be bought? Thank you.
Look up hourglass ingenuity on Instagram
He makes them in batches and they sell out really fast
@@amcustomfab Thank you.
When cutting 45degrees with the evolution saw how do you get your parts to come out the same length?
I outlined some of my techniques in this video. Thanks for watching. Here's a link to the video.
czcams.com/video/jh5-4JWRnkI/video.htmlsi=hiIRTzhx36Djot4Y
hey men whatsupp really like your videos trying to do something similar to your shop. i was wondering where did you buy your cnc table and if u have a link?
store.langmuirsystems.com?aff=11
thnxs😁
wich one do you havw the 2x2?
I recently viewed a vid showing your magnetic lead holders. They were blue anodized alluminum I think. Where are those available?
Thx
They are made by @hourglass ingenuity on Instagram
What air compressor set up do you use for your plasma cutter?
Have a 30 gallon dewalt. If I have to cut slitter longer than 5 minutes I have to pause it and let it catch up
Way to use all your space
Alex, I really want to do exactly what you are doing. I am recovering from getting run over on my 1957 Harley Panhead but I am able to walk now. I have been sourcing parts for my V-6 4X4 Ranger XLT that I put a flatbed on and a 50 gallon 5 horsepower compressor and a flathead briggs to power it. I am installing a 1000 pound crane on the right rear corner with hand made outriggers and a hydraulic power unit that is a power steering pump and 12 volt motor. I have a Miller Roughneck 2e AC welder and a Hobart 300amp DC 2 cylinder welder that is fantastic. I am going to mount one of them to the bed as well. Are you here in Pa. I would love to talk with you sometime. Thanks my friend. Oh I found a 100 year old lathe that is in great shape but no tooling. I have the ability to purchase a fully equipped lathe for 1000 but I do not have the money at the moment. I should be able to start soon.
I am in Oregon
Sounds like a good setup you've got going on best wishes on a speedy recovery
@@amcustomfab Dang so far away!!!...lol
Alex,
I really enjoy your videos, I am an old back yard mechanic and recently purchased a Primeweld cut 50d, I love to weld and have Gas, wire feed and arc welders. I was doing Tig welding in the 70's and in all that time I have never watched a video that explains the process better than yours do, I do have 1-2 questions for you, do you rest the tip of the plasma cutter directly on the material or do toy use one of those small wire clips to raise the tip off the metal. Would you add extra air dryers to the compressed air and if so what type do you recomend.
Thank you very much, I haven't watched all of your videos yet but I will.
Take care
Dave B
Easton Washington 98925
You either want to use the wire clip standoff or you can purchase what are called drag tips that have high points that allow you to drag the tip itself without plugging up the orifice. I do have a small dryer set up currently just have a water oil separator and then a motor guard 100 micron filter in line with each other thanks for watching really appreciate it 🙏👊😎
Alex, I want you to know I wrote to primeweld about your site and told them how impressed I was.
Well thank you sir I really appreciate that 🙏👊
@@amcustomfab no thank you.
Hi Alex, I contacted Prime weld about drag tips and was told they are not available for my cut50d machine also the ceramic cups that came with my cut50d have no groves to use the wire clips to raise the cutting tip off the surface, I do see that they sell a pack of consumables that includes 10 tips, 10 ceramic cups with groves and clips but I am not sure they will fit my machine
Hello,your video is a good fit for our tools,we have a tool that we want you to review,are you interested?
DM me @amcustomfab. On Instagram
I just finished mine, I "planned on" doing it when the shop was cleaned up a bit... 6 months later I gave up and made the video. 10x19 attached "1-car" garage: czcams.com/video/WuCeeo6IBFA/video.html
I will check it out 😎