Drill Driver Hanging Station - DIY
Vložit
- čas přidán 5. 09. 2024
- Drill Driver Hanging Station - DIY
Hello guys!
In today's video i will show you how i made a hanging charging station for my drills. I had some material left from the last project of mine and i decided to use it all for the hanging station for my drills.
I hope you guys enjoy the video and if you do then dont forget to like and subscribe to my channel to see more of my work. Thanks for all the comments under the video , it encourages me to make more and more projects like this one right here!
Naprawdę świetny pomysł i wykonanie! Niesamowity, wyróżniający się design. Baaardzo mi się podoba!
Dzięki wielkie.🙂
NA tym kanale design jest niepowtarzalny, nowatorski i ergonomiczny.
@@watergeting8586 Dziękuję
Świetny pomysł!
@@rockyflower Dzięki
That is a very well built and professional looking charging station!
Thank you very much for your comment😉
Faktycznie piękny i precyzyjnie wykonany wieszaczek/półeczka na wkrętarki, baterie i akcesoria.
Pociął Pan blachę szfierką kątową, jakby to robił robot. Nieraz mi też udaje się taka obróbka 😀.
Gratuluję i serdecznie pozdrawiam 💖👋🚜.
Dziękuję😉
Lepsze niż jakiekolwiek fabryczne 🦾
Dzięki😉
Сам пытаюсь реализовать нечто подобное из фанеры. Проблема в том, что шурики и импакты весьма разные по габаритам. Автор молодец!
Thanks
awesome
Thank you for your comment😉
Cool! Now all I have to do is buy another $2k worth of tools to make something to store my tools.
Thanks. If it's new, then probably yes. I look for bargains or damaged ones in decent condition and repair them.
c'est vraiment la classe!!! super création, esthétique, ergonomique et utile.... vraiment un grand bravo... Après, au vu de ton équipement, on voit que tu maitrises le sujet 😉👍
Thanks😉
Cool!
Thanks
In one word, AWSOME 👍🏻
Thank you very much.😉Regards.
Wish I knew what wheel he is using on the angle grinder that cuts aluminum that clean and easy.
This is one of the cheapest discs designed for aluminum, not stainless steel. I think you will definitely find one in your store.
beautiful
Thanks
Sensational project...if I were you, I would try to sell it to a big store, like Home Depot, Lowes, Harbor Frieght...congratulations.
Thank you. Unfortunately, making something like this from new material would be too expensive. I managed to find almost everything at a scrapyard.
Mewah sekali brother...
Sukses buatmu...
Horas
Thanks
Привет. Отличная работа, молодец!
Thanks
Let's see, 4x4x¼ wall aluminum tube is $162.64/ft with rounded corners, that seems like a fairly pricey project, the chamfered corners added how much?
1 meter - $20 at scrap
Looks like an awesome finished product! Great job with this. Do you have a link to that kind of aluminum tubing?
Thanks. Unfortunately, I don't have it. It was from scrap metal.
@pureexpanse ok gotcha, thanks!
@@EnochPedersen No problem.
Super
Dzięki
$20,000 worth of tools to make a $50 box 😢
There’s quite a bit to unpack in this comment. While tools are essential, they’re only part of the equation. To effectively use these tools, you need a variety of skills, including manufacturing knowledge, material understanding, and some mathematical proficiency. Suggesting that this entire process is worth only $50 greatly undervalues the effort involved. In reality, the cost of materials alone can easily exceed twice that amount. Moreover, the time and expertise required to create such a high-quality build would bring the total cost into the several hundreds. It’s important to recognize the true value of craftsmanship and the resources it entails.
I don’t think anyone was suggesting you have to go out and buy all of these tools. Dude’s just so happens to have these tools available and he’s showing you what he’s done with them. Always a jealous one in the bunch. 😂
Ficou sensacional
Thanks
Hadir nyimak sukses selalu
чудова робота !
Thanks
Elegancko👍
Dzięki
Super sprawa. Gdzie znajdę taki profil?
Dzięki Naprawdę nie wiem. Ten co ja mam znalazłem na złomie.
It came out amazing! Although I must say, far from DIY 😂, I am guessing it is very heavy too, which is not an advantage for such application. That said tho, it was super fun to watch you making it and showing off your bad ass skills
Thank you for your comment. You are right about DIY. It is a slightly higher level than home use thanks to the equipment I have. But I didn't have it in the past and I messed with profiles, rails, whatever I could. I didn't have a welding machine. I either borrowed it or tried to do it. otherwise. And it can be done, it just takes more time. As for the heaviness, it's definitely heavier than plastic. But I make it from what I find in the scrapyard and as cheaply as possible. I always try to do something different than others. Regards.
@@pureexpanse you are right, if there is a will there is a way! Your project came out fantastic, thank you for sharing.
👍👍
😉
dupe urywa ! teach me master !
😉
genius ❤
No. No exaggeration. 😀Just my version.
GREAT OUTCOME - HOW MUCH DID ALL THE TOOLS COST?
NOT EVERYONE HAS THE BUDGET YOU OBVIOUSLY HAVE...
Thanks. Not every tool is new , i buy some of them in a worse state and just fix them myself so its cheaper. I wont put the costs here because its not entirely new.
Schönes Teil
Thanks
wow
😉
Ciekawe
Magnifique
Thanks😉
Pancerne i drogie takie sa najlepsze !
😉
That’s looks amazing!
Thank you very much😉
Gdzie mozna dorwać takie profile aluminiowe?
@@rafam1347 Ja znalazłem na złomie
@@pureexpanse Oo fajna okazja, ps fajnie to wyszlo
@@rafam1347 Dzięki
Quá rãnh. Sao ko là gỗ hay nhựa dễ dàng hơn
Why? Because I work with metal and I have the tools for it. What's simpler? Probably plastic and wood.
😀
Made by a millionaire. Made by an aluminum plant owner))
Its neither made by a millionaire nor its made by an aluminium plant owner - the material is bought from a scrapyard
@@pureexpanse w takim razie milioner posiada to złomowisko lub posiadacz fabryki aluminium. Ale te ludziska kąśliwe
this station cost same same my workshop already!
I don't know how much your workshop costs. But this station cost me $60 with scrap material.
Тот момент когда полка стоит дороже чем инструмент😂
If it were made of new material, it could cost so much. But since it was from a scrapyard, the price is reasonable.😉
Za h... Zwykły niewtajemniczony zjadacz chleba, nie zrobił by tego tak mając te same narzędzia i na dobrą sprawę podane wymiary .
Da rade tylko trzeba chcieć
How much to make me one
😄
Представляю сколько стоит такая труба!!!!
1 meter - $20 at scrap
Кхм. Пожалуй пусть дальше на полке валяется😂
Это алюминий?
Yes
Така поличка коштуе 50$ і 5-ть хвилин свого часу що б повісити.
ein messschieber ist ein messwerkzeug
kein anreißwerkzeug
Sorry, too much effort to store some tools
Agreed. I made my drill storage from 3” pvc the entire project took a couple hours, it was easy and has lasted for years. This project must have $300 in aluminum square tubing to store a few tools. Looks nice but way over done.
Псих😄
Хороша работа, но это изъёбство: проще, быстрей и дешевле из фанеры сделать.
I don't have tools for working with wood, so it's easier for me to make them from aluminum or steel. I work with this and I have these tools. The material cost me $60. Plywood was probably cheaper. Could you do this faster? You'll have to answer for yourself because no, I don't work with wood.