An idea that millions of people will appreciate!
Vložit
- čas přidán 20. 04. 2024
- Good afternoon friends!!!
My name is Alexander, on my channel you will see many interesting solutions for creating a tool with your own hands at home!
Subscribe to the channel, it will be interesting!
INSTAGRAM / master___sh
A shop full of home made tools used to make home made tools that can be used to make home made tools. Love it.
Hi 👋 Thank you bro 🤝
Toolception!
That made me lol
It's called reprap. Look it up.
I love the confidence in the craft, but watching you put your hands in front of the grinder every time terrified me.
There are dangerous moments, but I will fix it)! Thanks 🫡
@@MA-SH a very cool creation, i enjoyed watching
What the f@#-k , Almost had a heart attack during these moments!
You flatter me) take care of yourself don't worry
That was definitely scary - one kick of the grinder away from cutting your hand off at the wrist...😮
Concept is okay, but those 20mm tubes are too flexible...
was about to say the same thing
@@shedendman me too!
Just use larger tubing then. 😊
With it being on its corners instead of the flat wouldn't that add a less flex?
Yes bro
Дело не в жидкой конструкции, тут показана идея как сделать каретку и как можно это использовать а усиливать это же дело каждого кому это надо. Автору большой респект, продолжай в том же духе. Всегда все начинается на макетах а потом получается та конструкция которая нужна. Спасибо!
Здравствуйте, огромное вам спасибо, приятно когда есть понимающие люди, всего вам доброго 🤝
Этих "показов идей" криворукими "мастерами" полный ютуб. Ничего нового: "гениальная идея" и криворукое исполнение, видосик ради видосика.
В самой идее каретки ничего нового нет, а подобная идея КАК сделать эту каретку не позволит получить хоть на сколько-нибудь жесткую конструкцию, сам подход колхозный. Но люди насмотревшись подобных роликов побегут повторять, тратя время, силы и средства.
@@user-pe3vn4th5l Главное чтоб люди хоть что-то делали, набивая свои шишки и оттачивая скилл, а не валялись на диване посасывая пиво или пробухивая недели например!
@@user-mb1ib6vo2n Срать в окно тоже входит в твоё "что-нибудь" ? Так вот этот ролик по пользе примерно как оно самое.
...кромочником никто не фрезерует плоскость . а нормальный фрезер продавит профиль...на 1-2 мм...
так что - извини , товарищ , но это фуфло. (я работаю с таким оборудованием..)..а вот щеточный станок- , что в кадр попал- это годная штука. , только надо болгарку заменить на асинхрон...по цене будет тоже самое , но обороты ниже. и тяга лучше. ибо станок-это станок , а не приспособа ..
Для моей цели достаточно кромочника и он отлично справляется, на счёт двигателя согласен, болгарка еле тянет! Спасибо
А вот вам вопросик можно ...есть такие брашировочные машинки - они с регулятором оборотов и длинной осью 100 и более мм, а ещё есть шлифовальные с регулятором (ну соответственно для полировки кузова авто применяются) - так вот пытаюсь понять не одно ли это и тоже ? Ну да, там ручки по разному расположены , а в остальном ...
для полировки частота меньше- чтоб не "палить" поверхность..плюс можно эксцентриситет добавить...и они на оси мотора сидят(или через редукторные- но в осях. ) брашировалка гораздо мощнее. и+ болгарочная брашировалка- она дает кривизку из за прижима руками- но это не сильно важно. есть макитовские брашировалки с подшипником и креплением второго конца...на таком же принципе устроена камнегрызущая брашировалка-только там не щетки , а твердосплавные звездочки ...(ответил , как понял ваш вопрос)
Пару промежуточных опор добавить и ничего не продавится
@@VLAD18041976 это только для продольных- на каретку надо фрезером давить-иначе будет фигня...я ж работаю на аналогичном инструменте. тутвообще другие ПОДХОДЫ к работе. для потока надо конструкционный профиль (почти ЧПУ...ручной) . а для периодики хватает каретки из фанеры по всей ширине доски а опорные длинные-это вообще брусок ккалиброванный....ну поверьте..это работает у всех...
If you're asking yourself: what the point of it?, Fast forward to 6m 20s to get an idea. There are probably thousands of applications for this simple elegant idea.......the old adage "get to the point quickly" is central to everything; not just speechmaking.....Best wishes to all, John, Perth, Australia.
Thank you so much, friend! Huge greetings from Alexander from Russia 👋
Thank you! I got time economy to understand that this device is not necessary for me )
@psiholog-nikita-kozin Thank you bro 👍
I wish people would show the device working at the start of the video, and then people could decide to watch the construction. Watching someone drill a hole or cut a piece of steel gets boring pretty quickly.
What you do is, put time as 6:20 that make it jump right there!
This is an excellent video. I have always wanted to know the most effective way of amputating my hand with an angle grinder.
Thank you my friend 👍
In italia a CENTO in provincia di Ferrara la INCIMAR costruisce pantografi dagli anni 80 oggi sono tutti compiuterizzati
@@user-li1mk5rk8i 👍
You people are clueless 😂😂
Its honestly comical how many uneducated people with zero experience feel the need to comment on things like this.
Grinder discs WILL NOT cut through fingers 😂
I’ve hit my handed with them plenty of times, best case it makes a small tear.. worst case the blade will shatter on impact and leave you with a slightly worse cut..
Picking up a piece of 4’x10’ sheet metal in my shop poses a WAYYYYY higher risk of major injury than using a grinder (especially when you’re experienced with it..)
Keep doin you Master Sh.
Don’t listen to the whiners 😂
Everyone has their own opinion, no matter who they are 🤭
Very clever and innovative
Thank you my friend 🤝
Well done mr Alexander, will definitely make one following your example. Greetings from South Africa
Hello friend 👋Thank you so much 👍
😊
I used to flatten large slabs of Redwood decades ago, an 8 foot straight edge and a big power plane was the first step followed by belt sanding and then finish sanders.
You do it all day every day and you get very fast and good at it.
For a tiny slab like that I would power plane it way faster than a router could.
Ok thank you
so where do we find your video!
@@relentlessmadman 🤭
@@relentlessmadman Very few video's were made in the 80s
@@relentlessmadman He's just pointing out the more efficient option for someone who wants to learn more.
You have quite literally given me loads of ideas , where this kind of set up can be used !
Love it .
It's just wonderful 👍
@@MA-SH Better than that , it's simple !
Hey wait a minute! What’s that setup you have for cleaning the bars with? Awesome!
czcams.com/video/rL0diSGEsto/video.htmlsi=xETt2JdJvPWL29Sh thank you 😊
@@MA-SH Essentially a surface grinder. Though the wheel is a brush. Easily as interesting as the main focus of this video.
ikr? i wasnt sure what was cooler, the motion system or the cleaning tool lol
Love the way you reach over the spinning grinder wheel when cutting stock to length 😆
Thank you
I enjoyed the content. I was just imagining my health and safety officer at work, losing his mind at me if I was doing it 🙃 😆 🤣 😂 struck me funny is all. 😀
Maybe two handles on the side to hold the router better, the middle part could be a little stiffer but you gave me a great idea for a panel saw wall mounted i love how the bearingers move, great video
Your advice also helped me, the handles on the sides will be just right! Thank you very much 👍
Good idea!
@@MrDhandley Thank you bro
Very clever and innovative. I liked the ingenuity you displayed but how did you get rid of all those router lines off the top of the timber slab after you finished routing?
Hello, thank you! I used a sander and sandpaper for 60
Great jig. Sure would work better with a full size router with 1/2" shank bits and they makes bits designed for flatting.
Thank you
This man's got more tricks up his sleeve than David Copperfield.
David was good in his day 🧙♂
Excellent basic idea, but looks like it needs some "tuning". Looks to me like it wants a bit more support (perhaps a few more "legs" on the rails the rollers move on, and some angle-iron on the carriage?) but aside from that, appears to do the job pretty well. Think I might try something real similar for a project I've been tinkering with for a while without actually getting quite what I was hoping for.
Damn..I should have watched your video.. I,m such a fail😢
@@shroommcfanta2020 Way to demonstrate that you have no concept of this thing called "constructive criticism". You're right. You're a fail. Crawl back under your rock.
Hello, I understand you! Thanks for the advice!
🥺
No, you are wrong. As a quick, easy, cheap, repeatable and efficient method to rough out a flat surface on large timber surfaces this just about hits the spot. Great idea!
Excelente idea!!! 👏👏 y muy bien elaborada. Por poner una nota de critica constructiva, la flexión de los tubos de sección cuadrada ofrecen mas flexión en la mitad del recorrido que en los extremos. Eso se solucionaría en parte, si los tubos fuesen de sección redonda, ya que ofrecerían mucha menor flexión. 👌👌
Bonjour, merci beaucoup
Hello Master sh beautiful idea beautifully done good job
Hi friend 👋Thank you so much 🤝
Обычно в конце пропила начинает подзакусывать диск и болгарка норовит выскочить вперед. И в этот момент перед ней оказывается рука "мастера". Это же гениально. Будешь так делать у тебя одна рука останется.
Спасибо добрый человек
Great. You can also use this as a pantograph. Thanks for sharing
Thank you my friend 😊
Anyone else waiting to see the sanded and oiled result? I would have been itching to attack that piece with the sander! Great work and cheers from Sydney - Dave
Hello 👋 Thank you bro
Otra genialidad👏👏!! La verdad que da gusto mirar tus videos!! Saludos!!
Hola, muchas gracias! 🤝
Интересная идея! Превосходная работа! Молодец, мастер!😊 Как всегда ЖИРНЫЙ ЛАЙК!😊
Приветствую Денис 🤝 Огромное спасибо 😁 Шеф👍
Жиром не подавись, чyчeлo безграмотное. Расширяй словарный запас, примитив.
Good idea! I'd like to create a project about a similar machine 🙂 I think this is a useful and economical system to create a good machine (for wood and for metal). Good work! ⚙👨🔧
Hello, thank you so much friend 😊
Great idea for the portable router table! Don’t know if I’d use it for that particular application but I did work! Nice fabrication
Hello 👋 Thank you my friend 👍
This is called a router sled, and its purpose is flattening slabs.
Making your own tools!!!!! You dare, you do, you succeed. A satisfying, well done job!!!
👍👍👍👏🏻👏🏻👏🏻
Hello 👋 Thank you my friend 👍
I'm gonna buy me a bunch of tools and make one of these so the next time I need a bucket full of sawdust to soak up an oil spill I can make some. Maybe I'll flatten that warped table too.
Thank you bro
I was too worried about you severing your wrist with that angle grinder to appreciate the engineering.
🫡
Seriously. Please learn how to use an angle grinder safely, then reshoot and repost this. Even with all the "idiots with a bucket of tannerite" videos on CZcams, your video is the most dangerous I have ever seen.
Your comment is more dangerous than my video
Are you some sort of water head?
Clearly unnecessary . There was no blood!
This was enjoyable to watch!
I think you enjoy using it as much as I liked watching. 🤩
Keep them coming! 😎
Thank you buddy 🫡
Thanks. Liked how you showed most of the finished product at the beginning. I don't currently do a lot of routing but this will be in my brain when I do :-)
Hello 👋 Thank you so much 👍
super super super very good job keep it up asif from pakistan
Hi 👋 Thank you bro👍
I love how you hold the end of the rod at 0:33 - what could possibly go wrong? 😂
it can't, so the shooting is accelerated 5 times
@@MA-SH No offense, I think I just saw too many "oh no, I cut myself on the tablesaw"-videos lately 😀
@@michaeltrojanek9392 ok 😂
@@michaeltrojanek9392 A handheld grinder with an abrasive disk is not a table saw.
beautiful work. It's the idea I was looking for to smooth out my cutting boards
Hi👋Thank you so much 👍
As soon as I saw the ball bearings I knew this was going to be on my list of favorite videos from your channel!
Very good bro, thanks 👍
Rails need to be larger, too much deflection is visible.
They should, but for this length and a small milling cutter is no longer needed, and at the end it is clearly shown with the help of a level that there is no deflection, then why write about it?
I wouldn't call this an idea, more like a copy
Everything is copied.
A copy is an exact repetition of something! and no one has such a design
@@MA-SH It is largely based on old DIY CNC designs that I have seen 10 years ago.
Main difference is that they put the bearings at an angle so that they run flat on the surface.
that was an amazing build! how much did it cost you?
Well Engineered ! I’m a retiredProfessional Woodworker with over35 years in Ommercial Architectual Woodworking the 0:15 0:15 be utilized for breaking down Sheetgoods and haveDecorative details put into. them easily like a manual CNC machine for low cost samebearing and track system could be easily adopted to build a home built Panel Saw /router Machine that can be utili🥥😊
Hello 👋 Thank you very much 🤝
Как всегда на высоте.Респект мастеру
Николай жму руку 🤝
Поддерживаю как всегда 👍👍👍
Огромное спасибо 😊🤝
Nice.
But as others have said, the tracks are a bit flexible.
Also, it would be nice to include bearings on the other axis too, instead of sliding the router under friction.
Thank you for the helpful advice 🫡
its good to see how another human solves a problem.
Thanks
Если к станине для фрезера ещё приделать железную палку на шарнире, то двигать фрезер будет удобнее и снизится прогибающая нагрузка от рук 😁
Согласен, но тогда нужно и там подшипник делать 👍
Просто приварить к каретке две ручки , как у большого фрезера . Будет на много удобней
Слишком тонкий профиль. Будет сильно прогибаться
Хорошо, переделаем на толстый 🔩
@@MA-SHЧто ж хорошего?
Слепил какую-то куйню 🤮🤔
@@MA-SHклассная задумка, палец вверх! Обязательно повторю но надо что-то попрочнее, в этом варианте пустить шпильку по всей длине внутри профиля. Удачи!
@user-wq2me6yn8t Для тяжёлого фрезера конечно нужно профиль помассивнее, но в данной ситуации фрезер игрушечный)) Спасибо 🤝😊
Кто это )) ты болгарку то в руках держал 🤣
Сама идея- прелесть!
Автор профессор, удачи!!!
Здравствуйте, благодарю 🤝
только вот идея не принадлежит автору😁
@@wintdgy2369 так же как и моя конституция другим авторам!
Cross slide rails should have been rotated 45 degrees so they wouldn't flex so much under the router weight and you pressing down on it.
Otherwise great simple design.
You mean the long rails? Or the short ones? Of course the long rails have a corner up (which seems like the least stiff configuration, am I not correct?) to keep the rollers from falling off.
@@rodschmidt8952 meant the short ones. When watching the video you can notice slight flex in those short rails where router sits. It might come from the weight of the router or from pushing downward with your hands. But then of course this can be considered as "good enough" for hand planing later :)
Thank you so much 👍
I would add bearing rollers to the cross slide as well once the rails are turned 45 degrees, instead of box section sliding on box section, same as the longitudinal setup. Great job though.
nice design!
i do wonder though how is it with regards to deflection?
I see it's a very light router you're using and that would help
I only have such a milling cutter, I did it to align one countertop
Recreated the Woodpecker flattening jig for a 10th of the price. Need a bigger router and a bigger bit and and some stiffeners for the rails but nice job.
Thank you my friend
O campo da serralheria , é fascinante . Tenho como hobby. Parabéns pelo projeto.
Obrigado amigo 👍😊
Thanks for sharing....good idea.....!!!!!!!!!! Greeting from Comodoro Chubut Patagonia Argentina
Thank you my friend 🫡
Actually a very well engineered flattener. Good inspiration!
Thank you bro
La creatividad no tiene limites . Excelente idea. Felicito
Hola, gracias 🤝✊👍
I hope my grandsons will learn some woodwork skills from me and welding skills from their other grandfather. There have been many times metal work would have been useful to me
👍
Wow! Ive been trying to think up this sled system for a few weeks now. You just helped me a huge amount
Hello 👋 Thank you bro 👍
Necessity is the mother of invention. Nice temporary jig. Well done
Hello 👋 Thank you bro 🫡
Outstanding, great idea and great job. Cheers Alex from Brazil.
Hi friend 👋Thank you buddy 👍
buen concepto de diseño, pero muy débil para esa longitud de largueros.
Debe de ser una estructura bastante mas sólida si quieres tener precisión en el trabajo realizado.
Hice lo que fue, gracias
Okay, you convinced me - i'll learn how to use a hand plane.
Thanks
Gotta love that burn of hitting your hand with an abrasive blade.
Good video. No bs. Just the facts, ma'am. Even less because you just do it. A picture is worth a thousand words. Love it, in fact.
Nice job pal!
Hello 👋 Thank you my friend 😊
Great idea and concept but using the wrong kind of bearing. You could have bought V groove with bearings installed from Grainger or McMaster-Carr. Would have been faster and cheaper probably. Those ball bearings are not sealed and are not made for axial loads. Great job though!
Hello, thank you very much! I didn't even know there were such things) during the tests, I changed the bearings to sealed ones, pay attention to the video preview!
nice hand driven, foldable version alike many have created (just like i did on my video... few years ago🙂
Thank you my friend 👍
Could you drop a link to your video?
@@MA-SH I'm not a creator, i don't make videos. i have just short how it works on my profile
@@aniolo5 I get it, good luck
I had a close call using a cutting disc with one hand. It snagged, flew out of my hand and whizzed past my ear. Could easily have hit me in the face or neck. I vowed never to do it again. Also, you really need to stop reaching over the top of it. One day it will snag and flick up out of control and it cause you a nasty injury. No job is so important that It can't be done safely 👍
Hello 👋 Thank you 👍
My respect. Your tool worked great.
Thank you bro 🤝
Los travesaños que sostienen la fresa son muy delgados..... y se curvan hacia abajo con la presión de las manos. Calculó mal la resistencia de los materiales.
Ok thanks
hello Alexander it's a great idea and very nice video but please don't pass your hand front the grinder it's very dangerous .😉
Hello, thank you so much? Okay, I'll be careful. 😊
For version 2.0 try ground round stock and sealed pillow blocks- much more precise movement and sealed against wood dust.
Ok friend, thank you 🤝
Great concept! Router/bit is too small to be practical for all but the smallest pieces. Think 3 HP and a 2" bit for a start. 1/4" shank tools are way too fragile for a tough job like flattening a slab Tube is too light, too flexible. Most woodworking benches don't have steel sides .... maybe rethink the mounting.
Rollers under the tube is a wonderful idea!
Maybe version 2.0 will have dust collection.
Thanks 👍
Hola cómo estás Mil gracias por tu vídeo y compartir tu Gran Idea saludos cordiales desde Granada España
Muchas gracias amigo 🤝
Parabens foi o melhor projeto que eu vi até agora
Muito obrigada🫡🤝
WOW THAT'S A BRILLIANT JIG FOR USING THE ROUTER
Thank you my friend 👍
My father-in-law has made a similar rig for a tile cutter. Makes for some tidy cuts!
👍
Excellent idea and the video is perfect!
Hi 👋 Thank you buddy 🫡
Hello Alexander - Very good design and concise video. Please tell us what camera you are using - it is high quality. Greetings from Oregon.
Hello, thank you very much! Sony A6400 Camera and Sony 18-105mm f/4G OSS PZ E lens (SELP18105G)
Best wishes from Siberia ✊👋🤝😊
Very resourceful craftsman. My only comment is use nylon lock nuts to secure the outer roller bearings.
Hello, thank you so much! Thank you for advice 👍
@@MA-SH I'm a mechanical engineer consultant, prototyping is a big part in my life.
Super jednoduché a snadno rozložené a skladné 😏
Dobrý den! Díky moc! A chtěl jsem říct, že české pivo je nejlepší🍻
아이디어 부터 설계, 가공, 시제품 까지 그 흐름 이 예술입니다. 정말, 제조업 열심히 노력하고, 빠른 변화 에 적응 못하면, 어려운 환경입니다. 응원합니다.
당신에게 너무 많은 친구를 감사 🫡
Warum verwenden alle mit dieser Art von Vorrichtung einen Fräser statt eines Elektrohobels? Ein Elektrohobel hat sich für mich als deutlich logischer erwiesen.
Ein Freund werde ich bald mit einer Elektrobank machen, in dieser Situation braucht es viel mehr Platz für einen Hobel
Der Bosch GHO 26-82 hat Anschlagsflächen mit Gewinde, wie gemacht dafür...
Nice setup, this can compete with a CNC.
Hello 👋 Thank you bro 👍
Excelente te trabajo compañero. Si señor. 😉
😁🤝
😂Направляющие проседают....
🫣🤭
Still a BRILLIANT IDEA!!! YOU ARE BLESSED WITH INNOVATION!
Thank you bro 👍
Výborné a užitečné video,hodně štěsti ,ať se vam daři .Pozdrav z ČR 👍🇨🇿
Dobrý den, moc děkuji! 👋
Reinventing the wheel?
Yes,write something new, otherwise your comment looks like that bike
Think I would use the 20x20 aluminium extrusions and rollers used on 3D printers.
😊
Great idea like it. I am going to increase the size of the box section to give me peace of mind about flexibility
Thank you 👍
Well the title captured me but the moving thumbnail told me it wasn’t a hack to make my phone better.
But here goes nothing, click.
3:56 a wheelie bar for a drag car
3:57 okay apparently not. 🤨
A stump grinder bar thingy.
After a while I was kinda hoping it was a rototiller straight line keeper.
My rototillee loves pulling to one side if I try to go deep with it.
But okay, level a board wider than a planer can.
There are dangerous moments, but I will fix it)! Thanks 🫡
Top pour le travail avec une dégauchisseuse cela permet de ne pas trembler j'aime bien très utile bravo
Bonjour, merci beaucoup 👍
Make lock system with bolt and handle on both axis, and can be locked one axis at a time if needed.
Thanks
What! No cnc? Love the burnisher.
🤷Thanks
Excelente, parabéns...👍👏🤌
Olá amigo, Muito obrigado 🤝😁
Nice. You made a CMC machine.
Carpenter Manual Control.
Thank you buddy 👍
Replace the adjusters with a threaded mechanism and you would have a lot of fine tuning.
Thanks
If I ONLY had a welder......... and knew how to weld! 😃
Thank you bro 🤝
Your skills are great!
Thank you bro 👍
VERY NICE !!!! Great job.
Thank you bro 🫡
🍻 Nice job, but it appears you may be able to apply pressure downward when pushing outward causing different height. 😖
Thank you bro 👍
why go to all the trouble only to use a tiny router.
Also, those tubes are too small for such a large span.
good concept. has been done before.
Thank you
I would rather have this guy as my neighbor than a stock broker. Just saying that this guy is useful talented
Thanks