I followed the build and built the nutball. It's now in the neighbors tree ... but a few flights and one prop before that I discovered that it's a good idea to put a rubber band on the rear bamboo stick! The wing came off at altitude and gently flapped down, I cut the power but the body came down like an arrow (servo wires ripped of the receiver cleanly)! No damage! One strong plane.
hey josh, josh... i watch your vids for quite a while now and i am a big fan depronbuilder myself. keep it UP guys great stuff everytime greetingz from holland Marty
Thanks for the video. I've been interested in getting into the rc plane hobby for months. This seems like the perfect plane to start with. I tried to find that transmitter on hobbyking but couldn't. Can you please add the links to the items in the description?Thanks again
@Matthewandmatthewpwn The product is a thin foam board (about 3-4 mm) covered with paper, in the US its available lots of places, including WalMart. In other countries it is usually found in office supply stores and art supply or craft stores, The Dollar Tree stores they talk about are a place where it can be found at a very low price, you may have something similar in the UK.
when you want to improve your Nutball you might try this.. look to page 671 on the rcgroups nutball thread It is a split elevon mod that will give better rolls.. it makes the nutball 4 channels with rudder on the left and elevons on the right stick.. None of the good characteristics are lost, but rolls are more axial and control is improved
Hi, so i found the flitetest plans on ur site and converted them to tile format but im not sure if im printing out the right size. PLEASE make measurements on the plans. Thanks!
Hi, just want to ask i am about to buy a second hand DX6i and don't know how to test it when getting from buyer except to get a plane and bind, is there away to test without a plane to be tested.will appreciate ur help. Thanks
Can you list the items needed? Hard to work out lengths of rods, foam board, wheel size, type of wood/tape etc. Buying alternative best guess products in UK so hard to product match. Never built a plan before so need a bit more info to gather what I need! Would also be useful to have a written step by step guide
Sir I want to know the centre of gravity for nutball rc plane which I made. I have 360mah battery and two 9 grm servo and 24 grm 1300 kv motor.plz guide me.
Tape around the battery connector hole so that if the battery pops off, it doesn't tear the foam. Everybody try a cheap scratch build if you have a cheap receiver!
HEEELP!!! how is the best way to connect the controls to the radio? I mean, i fly mode 2 and should i have ruder and throttle on stick number 1 and only elevator on the stick number 2?
i am wanting to build one but i dont know where the plans are. at your website there is a picture at the bottom but i dont think that is it where are the plans can someone send me a link to it
So you only need 2 servos one for the rudder and one for the flaps??? No aileron servoes..? sorry im a newbie and this is the first time building a plane. thanks for the help...
im new to the rc world and i would love to build a nutball. i followed the link to your site and opened the link to the plans and there was nothing there, just black screen. help please. love your vids
@Highspeedfutzi Well, he did fail to mention the $15 shipping charge and the two month wait for it to be in stock and sent to the other side of the world. :^/
Michael Kaminski mode two: throttle on left www.hobbyking.com/hobbyking/store/__16239__HobbyKing_HK6S_2_4Ghz_FHSS_6Ch_Tx_Rx_Mode_2_.html mode 1 : throttle on right : www.hobbyking.com/hobbyking/store/__16238__HobbyKing_HK6S_2_4Ghz_FHSS_6Ch_Tx_Rx_Mode_1_.html
Thank you to flite test, years and years of amazing content that got me into this amazing hobby
Thank you flight Test, with this design I had my first flight. thank you for everything that you do and keep up the great work.
i just bought this plane and it flew BEAUTIFULLY thanks flitetest!
I followed the build and built the nutball. It's now in the neighbors tree ... but a few flights and one prop before that I discovered that it's a good idea to put a rubber band on the rear bamboo stick! The wing came off at altitude and gently flapped down, I cut the power but the body came down like an arrow (servo wires ripped of the receiver cleanly)! No damage! One strong plane.
My favorite part about flight test is they actually show how they instal the electronics!
Looks great, can't wait to build it!!!
Great videos guys, keep it up.
i build it in about 1 hour and it's a lot of fun to build and to fly i deffenetly recommend this model!
wow! thats way!!! easier than i thought it would be! thanks guys.
yes..it's very heavy. Try any packing tape including clear. Still very strong.
thanks a lot man i found them and finished my plane !!!
pretty excited about this scratch build cause i want the expandable bodies!!!
Nutballs are great! Love to fly them
Thank you very much!
Josh Bixler, if you want cheap then I recommend the motors from those battery operated hand fans. they may not last forever but they do work.
@lookeflite The motor mount screws are servo screws that are contained in the HXT 9 gram servo packs.
hey josh, josh...
i watch your vids for quite a while now and i am a big fan depronbuilder myself.
keep it UP guys
great stuff everytime
greetingz from holland
Marty
i was searching for plans too. but it`s shape is so simple that you could draw your own plans
My first plane!!!!
Nice build, I was wondering if you can show how you make a modified z bend your the first ive heard of this thanks
I think it might be under the delta wing swappable, look there for the parts list and plans for the fuselage...
i hope u guys never get dislikes, what is there to not like?!?! :) great vids keep em comin!!!
First and great video guys. Keep up the good work as usual!!!
Great video guy's.
What would you have if you had 2 nut balls and a blimp in formation ??
Thanks for the video. I've been interested in getting into the rc plane hobby for months. This seems like the perfect plane to start with. I tried to find that transmitter on hobbyking but couldn't. Can you please add the links to the items in the description?Thanks again
@Matthewandmatthewpwn
The product is a thin foam board (about 3-4 mm) covered with paper, in the US its available lots of places, including WalMart. In other countries it is usually found in office supply stores and art supply or craft stores, The Dollar Tree stores they talk about are a place where it can be found at a very low price, you may have something similar in the UK.
Bravo ........l'ingénieur .......👍💌🇩🇿
when you want to improve your Nutball you might try this.. look to page 671 on the rcgroups nutball thread
It is a split elevon mod that will give better rolls.. it makes the nutball 4 channels with rudder on the left and elevons on the right stick.. None of the good characteristics are lost, but rolls are more axial and control is improved
Print it in seperate pages then take a ruler and an x-acto knife to cut the border off the paper so that you can line up the pages then tape them.
Isn't butting the battery out of the power pot especially as it is right at the bottom and maybe scrape on the floor
yeah thats what i had to do to mine to.it was close but not perfect i will make another since i know what to do now.
@pallagustth It is just foam board bought a dollar tree. I think it is roughly 4mm thick with paper on both sides.
Do you recomend TGY 4x radio ? I want to make nutball for my brother !!!
There are links to multiple variations, including the ones used in the video.
Could you give the serial numbers for the parts so I know exactly which ones to get? Thanks!
Hi, so i found the flitetest plans on ur site and converted them to tile format but im not sure if im printing out the right size. PLEASE make measurements on the plans. Thanks!
Is there anything I could use instead of plywood for the firewall? Anything that's a little more readily available? Thanks! Great vid:).
Hopy King.... bravo
Leave the paper on both sides of the foam?
Hi, just want to ask i am about to buy a second hand DX6i and don't know how to test it when getting from buyer except to get a plane and bind, is there away to test without a plane to be tested.will appreciate ur help. Thanks
hi i´ll soon start building my own.
I just wanna know if you can put together wings from FT Flyer and nutball´s fuselage?
Thanks for answer.
WWEREEEEE ARE THE PLLLANNNNSSSSSSS
Can you list the items needed? Hard to work out lengths of rods, foam board, wheel size, type of wood/tape etc. Buying alternative best guess products in UK so hard to product match. Never built a plan before so need a bit more info to gather what I need! Would also be useful to have a written step by step guide
How do you print the plans? Do you go somewhere that can print it full-sized or on separate pages? If separate pages, how?
Good day! Do you have any models with a profiled round wing? Flyers fly worse, though. “thanks.
How do you calculate the center of gravity? Would this model work on cardboard?

I would say it is too heavy. But if you use a little as possible you would still be able to fly no problem :)
Sir I want to know the centre of gravity for nutball rc plane which I made. I have 360mah battery and two 9 grm servo and 24 grm 1300 kv motor.plz guide me.
@sgermiller C.G is 5 inches back from the firewall friend.
Tape around the battery connector hole so that if the battery pops off, it doesn't tear the foam.
Everybody try a cheap scratch build if you have a cheap receiver!
Hi Josh. Can you tell me what the product number for the screws you used for hold on the the motor mount? Thanks
where can i get the plans for this plane with the marks for the swappable fuse. the rc plans does not have the plans with the fuse marks ?
The only thing that will print is the scale down ver. H ow do we get the spec for the full size?
@TheSupersparks123 yes, just scale the picture so it can fit
what do you use to charge the battery with?
where can i get the plywood for the firewall
HEEELP!!!
how is the best way to connect the controls to the radio? I mean, i fly mode 2 and should i have ruder and throttle on stick number 1 and only elevator on the stick number 2?
hey i think the link on your sight is wrong. the plans that you provide seem different from what i see from this video
i found a plans on their website in topic about nutball scratch build. it is at the end of topic
i am wanting to build one but i dont know where the plans are. at your website there is a picture at the bottom but i dont think that is it where are the plans can someone send me a link to it
how thick is the foam you use?
i went there but it does not show the plans for the marks for the fuse.. does flitetest have 1 all i can find is rc powers plans
can any one tell me what gauge wire did they use to make there landing gear from
Can you use cricket bat tape ???
I can't find the fusealge in the plans.
So you only need 2 servos one for the rudder and one for the flaps??? No aileron servoes..? sorry im a newbie and this is the first time building a plane. thanks for the help...
+Melad Alrekane yes
Yes. The Rudder makes the plane turn like ailerons would.
Greate greate greate !!!
im new to the rc world and i would love to build a nutball. i followed the link to your site and opened the link to the plans and there was nothing there, just black screen. help please. love your vids
What thickness is the foam
How thick is the foam? 3mm, 4mm or more? And what is it called?
i have a sheet of foam 600x400x10mm is that ok to use
Is there any place in england to buy foam board?
@lookeflite shipping cost usually double up the price :/
Silly question but what size foam board doni need to buy?
MrBlackbrabus1 about 1+m x 1+m or bigger
go to their site and its under the video there
@flightest what about the cg?
What type of foam is that? can i get it at dollar store?
Is that an ornithopter I see in the background? Please give more info in that bad boy.
dose anyone know how to print out the plans to size? i dont get why they didnt just do a pdf.....
@flitetest how thick Foam must I Use?
@jezrougan lol! I'm not sure. It most of been a bad eyebrow day!
@onetradgicstory totally.
how to build fuselage for nutball
the links they give do not look like the plane they are building in the vid
@flitetest How Thick Foam Sheet Can I Use
Is this a 24" nutball? if not, what's the diameter?
@brandom braga this is a 20''. i have built the same and fly realy nice. but my is now 15'' that fly is alot better
hi where is the link to the controller please.
Can anyone link me directly to the plans? Theres too many on rc groups :(
Way tail heavy. You need a large battery or bigger motor. Build Goldguy`s version. R/C Groups.
@Highspeedfutzi
Well, he did fail to mention the $15 shipping charge and the two month wait for it to be in stock and sent to the other side of the world. :^/
Josh, Chad, why don't you make and fly some EDF-driven plane?
which thickness of foam should i use 3mm 2mm please recommend
Nn Sharma it doesn't matter. The thicker it is, the more durable, but it adds more weight
hey brother nice to see indian guy...if you live in delhi we can do this design together
@@dhruvgarg4 where do u live in delhi tho?
6mm would be enough.
@@shutdahellup69420
kotla near defence colony
Try Dollar Tree......... if not in US, look up Adams Foam Board
Is it good for beginer flyer
Can we make it 4 channel
yep perfect for newbie with 2s lipo
Swappable version one, no?
yes it is
i cant seem to find the Hobby King 60F anywhere and it would be amazing if someone showed me a link of it to buy
Michael Kaminski mode two: throttle on left www.hobbyking.com/hobbyking/store/__16239__HobbyKing_HK6S_2_4Ghz_FHSS_6Ch_Tx_Rx_Mode_2_.html
mode 1 : throttle on right : www.hobbyking.com/hobbyking/store/__16238__HobbyKing_HK6S_2_4Ghz_FHSS_6Ch_Tx_Rx_Mode_1_.html
shiloh bursle thanks so much! I looked everywhwere
Michael Kaminski np mate, its under a differeent name now, because is updated my brother has 1 and it is good value
nice
hes sick
how do you make the tail there seems to be no dimensions????
+George print it out and lay it over the foam
Brewbeer are you talking about the wood thing at the back if you know how to make it please tell me 😊
You sound like you had a cold Josh? :D