2015+ Dodge Charger Full Conversion from SCATPACK ➡️ WIDEBODY SCATPACK | Installation 😱 vz102199
Vložit
- čas přidán 9. 02. 2021
- 🔧Full Widebody Kit Conversion #vz102199 : www.vicrez.com/vicrez-2020-wi...
🔧Font Bumper #vz102196 : www.vicrez.com/vicrez-2020-wi...
🔧Rear Bumper #vz102197 : www.vicrez.com/vicrez-2020-wi...
🔧Side Skirts #vz102196 : www.vicrez.com/vicrez-2020-wi...
🔧Rear Diffuser #vz102166 : www.vicrez.com/vicrez-hellcat...
--------------------------------------------------------------------------------------------------------------------------
🔧Widebody Wheels: www.vicrez.com/automotive/whe...
--------------------------------------------------------------------------------------------------------------------------
✨Find More Charger MODs: www.vicrez.com/index.php?rout...
--------------------------------------------------------------------------------------------------------------------------
🛒 Vicrez.com
📧 care@vicrez.com
✈️ shipping worldwide
✅Use #vicrez✅
---------------------------------------------------------------------------------------------------------------------------
Vehicle Fitment Notes:
- 2020 Dodge Charger SXT, GT, R/T, Scat Pack, SRT Hellcat
- 2019 Dodge Charger SXT, GT, R/T, Scat Pack, SRT Hellcat
- 2018 Dodge Charger SXT, GT, R/T, Scat Pack, SRT Hellcat(All Trims)
- 2017 Dodge Charger SXT, SXT Plus, GT, R/T, R/T 392, SRT 392, SRT Hellcat(All Trims)
- 2016 Dodge Charger SE, SXT, R/T, R/T Scat Pack, SRT 392, SRT Hellcat(All Trims)
- 2015 Dodge Charger SE, SXT, R/T, R/T Scat Pack, SRT 392, SRT Hellcat(All Trims)
#DodgeCharger #MoparOrNoCar #carsandcoffee #carporn #carsdaily #teamdodge #carsofinstagram #moparmilitia #dodgegang #Cargram #carswithoutlimits #carspotting #instacars #carspushingthelimits #americanmuscle #bodykit #carlovers #vicrezwheels #dodgechargerwidebody #dodgechargersrt - Auta a dopravní prostředky
You honestly can’t tell the difference between oem fender flares and these. I managed to find full oem hellcat widebody kit with fenders from a mopar parts seller that came off a flooded cat. I ended up buying just the flares from vicrez, since the oem flares require a shit load of cutting in the rear door and body fenders.
🔥
U guys should offer basic colors to the parts like oem colors
this is amazing god bless Vicrez creators what a successful bzness man 🙏🏽
all thanks to so much support from you guys 🙌
All becouse of this video I just bought the full widebody kit for my hellcat charger , then I bought the widebody rims oem from a person on offer up that took there rims off there hellcat I payed 1,850 for the rims, and I just payed 1300 to paint and I’m install the kit and the widebody rims , there also going to give the car an alignment, today they will be done wit my car and I will post a video I also send the people from the shop this same video and told them I wanted it just like this one and they did every exact thing to the tee thank you guys ❤
I have mine unpainted so I have to match plum purple this video save my sidemarker problem i don’t want to mess with the electronics and lightnings of the car without watching help videos lol thanks 👍🏻
You all are amazing 💪🏾. I want to do my scat like that
thank you so much :D
🔥 plan on doing this to my Daytona
Yep i need this 🔥🔥🔥🔥
for sure!
I Enjoyed this video of the team putting this together. I would love to get this work to my 2014 charger but I see y'all only do 2015 and up. Great work and video though.
I need this for my Charger.
Grate job !!
Thank god I bought my 22 scat widebody new!!!! That’s toooo much work.
While spending a extra 25k for a wide body kit nah.
@@ChevyLS1454 fr 😂😂 that dumbass prolly payed that extra 15k dealer mark up🤣🤣 when u can just buy an aftermarket widebody kit and take it to a professional installer shop
I’m getting a 2013 rt charger and I seen this widebody on the old gen and I looks very good thinking about widebody it
See how long this video is? That is why I am splitting my widebody install into 3 videos
Definitely need this. Wondering what kind of spacers I would need to make the wheels stick out a bit more tho? That is while I save up to go wider on the wheels and tires
At least 1.5 or 2 inches
2inch for sure
Can you guys do a video showing install for lowered cars. Like how the gaps are filled after cutting the flares
we will be working on that
Nut
Nice
Thanks
Dope I skipped all this an just bought a Widebody👍but if I had a slim 392 or RT I would definitely consider this 🔥
Hemi I know you not vouching for this...
@@gameplayer222 why shouldn't he?
@@gameplayer222 whats wrong with it? its hard to find a wide body out here for a decent price and just for the dealer to do it its a extra 16k
@@gameplayer222 stop hating boy 🤣
Isn't it cheaper just to buy a widebody ? 🤔
You did a good job, but why you put that insulation blanket back on?
Did you guys do any cutting?
Hello!
Love the video and how educational it is, I have a 2016 with adaptive cruise control, would they just cut that out to install it on the new widebody front bumper? It’s going to be professionally installed. Out of my pay grade lol
Hello Kevin, please contact us on support@vicrez.com and we will better assist you! 😊
Do you guys have a adaptive cruise control grille?
My question is the way this kit is build and put on is it the same exact way how they did the original widebody charger or is the original came together attached if that make sense?
This vid ❤is awesome I wanna learn how to add this kit cuse I wanna do mine
Glad this video can help!
After the front bumper brackets are removed how do you secure them on the new bumper
I wonder if you could use rivets fro where they put screws at 🤔🤔🤔
Yes, you can
💪🏾💪🏾
🙏🙏🙏
@@vicrezcom beasts 💪🏾
I need them to install mines, if I get it
I see spacers installed on those rears but no cuts 🤔😳
So basically if I’m running 315s on all four corners I’ll have to cut even if I’m stock ride height
Do you happen to know if anyone has ever tried putting this kit on a 300? I was curious how close the wheel well diameters were on a Charger and a 300 and if they were close enough for someone to try that. There's always someone saying, "oh the Chargers and 300s are on the same platform" but there are subtle differences between the two and this area could be one of them. Anyway, this is a nice looking kit, which is why I ask about its potential compatability with the 300.
You can we have seen other customer custom mold our kit onto their 300, just keep in mind a lot CUSTOM work will be involved
At the 2:13 marker what are you using to secure the bottom grill ? Also what do you use to secure to top portion of the bottom grill
What’s did you get the front lip? Can you send me the link of the exact same one
Is there anyway I can take my car to you guys for installation?
I want to do this soo bad! Just bought a 2017 sxt charger last September!
I always see that it is recommended to cut into the car for 392's and up but do you need to cut the car for the R/T's?
it really depends if you are going to be putting bigger wheels and bigger tires. 392 suspension is a bit lower than a regular RT wheel gap would be the answer to your question
Where are you all located??, I definitely would want my fenders cut for just the widebody installation...you all look very professional with cut and adding the screws.
We have 2 locations one in California and the other in Oklahoma but we sadly do not offer installation :(
The clamps you used to bolt on flares to connect them , which ones did you use? Do y'all sell them?
We did use self tapping screws which can be purchased at any hardware store.
for the rocker panel, are you breaking the existing tabs off? Or is there a way to remove them without breaking them
yes you can wiggle it carefully but it is a very tight place on there, so we just pulled it off but we do include new tabs with the widebody rocker panels.
Good evening, do you have a kit for a 2021 Dodge Challenger hellcat? Thank you.
Just need to get the wider wheels and tires to match that wide body now.
we got widebody wheels on :)
When u added the wider wheels did it still ride smooth ?
I just installed it and it rides much smoother
I want this eventually but the thing is you guys seem like pros I’m just not sure if I can find anybody that would do it like this
Spend the extra money and drive to have these guys install it.
So if you cut the fenders to make room for wide wheels, wouldn’t the fender flares not line up considering the bracket would sit higher??? Please explain
We will be making a video about it :) but it doesn’t affect fitment
can you do my 2016 charger skat pack?
For those asking, if you run wider wheels/spacers, youll need to cut, or have it rub/hit the fenders and flares
So with the widebody wheels you still need to cut?
@@alexiskiaraclark3 no
@@alexiskiaraclark3 no, just different offset
@@creedson43 -2.5 offset
@@alexiskiaraclark3 personally im cutting my car and i do have the oem wide body wheels . also factor in your car if its sxt factory hight you "should" clear but if its rt/srt you will need to cut. also the reason i say "should" clear is because i have not tested it on a sxt charger but have done it to a sxt challenger and it did clear with none cut fenders on that challenger. but now i have to do a rt challenger and it for sure wont clear because that has a even lower suspension because of kw suspension set up on that car. PS seems like they did it on a srt car with no cutting so im assuming no rubbing i guess. for stock height
Is that double side tape gone hold it good tho?😭
Whats the drill size bit that was used to cut the holes for the parking sensors?
We used different sizes the rear bumper has the circle that you would need to cut it to. We used a small side and continued to cut more and more until we got to the size needed for the sensor.
Can you install the snorkels? Can you install if your car is on lowered springs?
Hello the snorkels grille?
I wish yall made a wide body kit for the chrysler 300s
Shop locating? The ones who installed this kit. Thanks
Is there any way to do the rear door flares without drilling into the door?
Yes you can just use 3m VHB double sided tape
Where are you guys located? And what’s the ticket on this upgrade?
What If The Front Is To Low & The Tires Start Scraping Under It
Can you make side and front splitters for real wide bodies
we have them available
the cool thing about the manufactured wide body is that you get the suspension and 305 tires with it. the conversion kit is cool but you need the performance parts with that wide body!
Exactly why I will just admire from afar.
Do you guys have a shop that’ll install it ?
I've been thinking about purchasing this kit, but I have so many questions.
-What do you do about the stock fog lights?
-What about the ACC sensor?
-If the fenders are cut, how are the brackets and flares not too high to match the other pieces?
-If you do cut the fenders, are the brackets cut, too? If not, how does the tire not hit them?
You’re better off spending an extra 1k and have it professionally done bro, way too many things could go wrong if don’t at home yk
I’m planning on doing this to my RT with some 1.5 inch spacers but my car is lowered 2 inches, question is will I have issues with rubbing
Hello, depends on your stock height :)
And how much for the wide body and the rims
for someone who sells the kits the video could of been way better .. even divided into different parts. One video well explained for the front bumper , another for the skirts and so on .. like them 1A auto videos are well explained .. this video does show how to do it but even they were kind of struggling from time to time
we were going to do that but we decided to just do it all in one video. Thank you for the feed back :)
While we are giving constructive criticism...it is OK not to edit in the most annoying and sometimes offensive music (if you can call it that), for every second when there is no talking. I would MUCH rather just hear the sounds of the shop. I have no idea why it seems like almost every shop or DIY video maker feels the need to do this.
So just to make sure before I purchase your full body kit. 2018 dodge charger RT will NOT need ANY cutting at all to properly fit with no rubbing? Correct? I will be using the widebody rims and full kit
Depends on what tire size you buy and your suspension like this car it needs to cut to run 305s
You will need to cut if you run 20x11” wheels and 305 tires, otherwise you hit those bumps, tires hitting factory fender, hiding under flares
It works for charger Rt 2017???
replacement fender flare how do i buy
Will this fix a 2022 charger?
how much you guys charge for the install?
Tienen algún distribuidor en méxico?
Do one for the challenger please 😭 lol I want to order the kit but want to know how to install it before ordering
We are working on it
Next video 🙏🙏🙏
Why put the older grill and not the oem 2019 grill it that came on the charger 🤔
bumpers are molded differently
I installed it last week and I am rubbing on front fender with vicrez wheels on 315's tire set up . Might go smaller tires hopefully it stops the rubbing
I did it on a scat pack so it sits way lower
we typically recommend 305/35r20s on a 20*11 rim with -2.5 offset
How long did install take? Just curious
Hey I have a question I just bought this on my charger and I added it does it affect it if I take it to get wrapped ?
Nice work. The vehicle came out great. I would love to obtain a sponsorship from you guys.
Much appreciated!
I need that bumper you removed.
If you cut the fenders how will the flares clip in.
did you ever find out?
Can I do this straight from a sxt or gt
What size of bolt and washer did you guys use to Assemble the front bumper? Does anyone know?
You can try using your old hardware from your order bumper or you can get like 3/4 hardware
I'm interested in getting this for my Daytona but I am wondering can I run spacers with my stock wheels ? Also I want to keep my snorkel grill but I want the mail slot bumper am I able to have both as well as my fog lights ?
You'll always need spacers regardless and bigger wheels and tires will help.
They make the snorkel grill For widebodys now
Does anyone know about how much this would cost?
Can rivers be used instead of the screws on the doors?
Yes, you can or 3m VHB Double sided tape
if you cut the fender won’t the widebody fitment from the bumper and fender be off?
Was thinking the same thing
What size of Tapping screws did you guys use
3/4
Does it come with all the needed screws and rivets?
Yes
Hopefully someone can answer this but would aftermarket wide body charger diffusers fit with this kit? Or only the diffuser it comes with fits?
Aftermarket will also work as long as its meant to fit Widebody SRT hellcat widebodies
You guys recommend I paint the pieces before installing or should I install it first then paint match the pieces?
Either way should work, but to ensure to perfectly match the color. Especially if you any other color then black. Install first and paint match it.
Where did the rear parking sensor bracket come from? The bracket that mounts each sensor to the rear bumper? Was it taken off the old bumper? If so, how? I am asking because I have a professional shop currently installing this exact kit on my 2018 Dodge Charger and they said the original bumpers sensor brackets are molded onto the bumper. The Widebody kit did not come with sensor brackets so unless I find some (Which I can't) then I will not have rear parking sensors. Please Assist!
did you ever figure this out???
Do you guys offer widebody kit installation in your location in Whittier, CA?
unfortunately we do not offer in house installation
What’s the part number for the flare brackets ? my kit didn’t come with any
Send a email to our support team with your order number so we can send you the missing items you need. Support@vicrez.com
Can you retain fog lamps?
Hello, Yes you would be able to get aftermarket fog lights.
No need screws
My RT charger is currently at the stock height, if i buy this and install it do i have to worry about anything rubbing?
Basically, they installed this on a SRT 392 which has a lower stock height than a RT so if you install it on an RT you won't need to cut anything
Are you guys in florida where can I install it
I want that wide body kit so bad but I have a sxt I can’t disrespect the srt models like that if I had the rt model I would consider at least they sound a bit like a srt with different exhaust pipes..😩
It’s your car so what you want and enjoy it. I have an rt. It’s as fast as a v6 trust me but I love it and I’m gonna make it my own! Do the same and who cares what people think
This comment made me laugh. Gotta respect the srt. It's kinda like scat pack dudes putting hellcat emblems on their ride. No respect.
@@yahooarchie8306 he prolly shouldn’t put srt on it I’d never upbadge either but it’s just a body kit don’t be a pussy
Do y’all have the wheels spaced out to match the new width of the car?
You can use the Wheels recommended 20x11 all round. These wheels have the widebody factory specs: www.vicrez.com/automotive/wheels-tires/custom-wheels-rims/custom-wheels?ajaxfilter=f32-wheel-offset,25/manufacturer,vicrez-wheels
Where is this shop? And what was the total cost ?
I own a 2021 charger scatpack pack and I purchase this wide body would you guys be able to install it for me? With your rims as well ?
did u get it installed??
How do y’all install the bumper, I’ve been trying for the past 3 hours and the bracket wholes don’t match up
I currently am having the same problem did you figure out a solution please let me know 😂😂😂
U said I'd have to cut a couple inches if I'm installing bigger wheels, but exactly how much? I'm currently close to purchasing a 2018-2020 dodge charger rt scat pack, and I plan to purchase this widebody kit, as well as a pair of 22-inch wheels for the rear of my car. So that being said, I'm kinda hesitant to cut anything that'll potentially f up my car. How many inches of plastic will have to be taken off in order to fit a 22 inch rear wheel?
I did a charger with wider wheels they were 22s and if you want absolutely no rub you will have to cut a lot, I had to cut about an inch a and a half up front and there was still sometimes a rubbing issue
I just bought this kit but my tires are still brand new before i buy new ones what size spacers would i need for the kit to look good im on airbags
ON airbags we aren't sure truthfully it depends on what system you have running but typically fender cutting is involved when on air suspension
Is there supposed to be a small gap on the outer edge of the headlight holes I got the bumper on as good as possible but i also have a small fender to bumper gap as well I’m not sure how to fix it…it’s honestly frustrating
😥️
What if i got the oem front fog lights and i wanna goo full 21 widebody?
the conversion does not come with fog lights but there is people making like custom work to have light there.
Where are y’all located ? How much would this kit cost installed and paint matched ?
We are located in whittier CA. We also have other locations in Santa Fe springs and oklahoma.