Looks good. If I was to make one suggestion, it would be to add a piece of flat steel or something at the bottom of the surface cleaner, just so the bottom doesnt flap around in the wind as you are driving!
Dont go electric on the hose reels. They evenually go out and is a pain. Trust me manual reels are alot better. While your employee is reeling up the hose your collecting the check lol. The less electrical on the trailer the better. The only electric i have now is the 12v but thinking about going air diaphram and being done with it. Never have issues with my 8gpm since we downstream and if i upgrade to air theres no bleach going through the pump.
Just leaving a comment to say that if you need a pressure washing or softwashing trailer, Southeast Softwash is the best option out there. Incredible work!
We've been customers of SESW for a few years now. We use their chems and have purchased a few blend manifolds from them. We may be adding a truck skid from them in the future.
I love it. The trailer. I’m thinking about getting one but I’d like the smallest but still vertical capable. Probably cold water for starters. I’d like to get a skid but I’m not sure if it holds enough water/ SH. Any suggestions ? Probably residential for starters
@northjerseykevin409 if you're planning on doing mostly residential you could get by with a skid. Larger commercial and jobs where you need to bring water out a trailer would be the better choice. The trailer is nice because you can just unhook and use your truck as normal. That's a little more tricky with a skid
@@adenpressurewashing6009 mean you could always mount some PVC pipe with a slit for the handle that you drop them into? Just a simple cheap idea (just saw where someone else commented the same haha, I'll leave it anyhow as a reminder to do it!)
You just lay the guns down and are not worried about them bouncing off? Maybe look into attaching some PVC pipes just bigger than the diameter of the guns so you can affix them to the trailer and keep it all looking tidy.
We currently rent. Someday we'd like to own our own shop. I'm guessing rent is going to vary quite a bit based on location. For something our size I'd bet you'd be between $800-$1,200/month
Looks good. If I was to make one suggestion, it would be to add a piece of flat steel or something at the bottom of the surface cleaner, just so the bottom doesnt flap around in the wind as you are driving!
Good tip!
Dont go electric on the hose reels. They evenually go out and is a pain. Trust me manual reels are alot better. While your employee is reeling up the hose your collecting the check lol. The less electrical on the trailer the better. The only electric i have now is the 12v but thinking about going air diaphram and being done with it. Never have issues with my 8gpm since we downstream and if i upgrade to air theres no bleach going through the pump.
100%
Naah electric reels all the way
Nice looking rig! Those first 1k subs can’t be the hardest to get. Put out 1-2 videos per week and 3-5 shorts and you’ll be to 1k in no time!
Nice build
Thank you!
SESE Batch Buster is a beast
We are looking forward to upgrading to one!
800 hours? Damn you been putting in some work! I’d hardly call that a young unit lmao 😂 I’ve got about 20 hours on mine 😅 gotta catch up
Just leaving a comment to say that if you need a pressure washing or softwashing trailer, Southeast Softwash is the best option out there. Incredible work!
We've been customers of SESW for a few years now. We use their chems and have purchased a few blend manifolds from them. We may be adding a truck skid from them in the future.
Almost 1k subs 👏
So close!
🔥🔥 Let's go then!
Buddy that is a nice clean setup! What size water tank and sh tank are those?
525gal water tank, 2 SH tanks 100gal and 30gal
@@adenpressurewashing6009 thank you
I love it. The trailer. I’m thinking about getting one but I’d like the smallest but still vertical capable. Probably cold water for starters. I’d like to get a skid but I’m not sure if it holds enough water/ SH. Any suggestions ? Probably residential for starters
@northjerseykevin409 if you're planning on doing mostly residential you could get by with a skid. Larger commercial and jobs where you need to bring water out a trailer would be the better choice. The trailer is nice because you can just unhook and use your truck as normal. That's a little more tricky with a skid
You should make it so you can clip the guns on the side of the trailer 👍
Do you have any recommendations on good clips to use?
@@adenpressurewashing6009 mean you could always mount some PVC pipe with a slit for the handle that you drop them into? Just a simple cheap idea (just saw where someone else commented the same haha, I'll leave it anyhow as a reminder to do it!)
You just lay the guns down and are not worried about them bouncing off?
Maybe look into attaching some PVC pipes just bigger than the diameter of the guns so you can affix them to the trailer and keep it all looking tidy.
Yeah we've been doing that for a few years now. Haven't had any bounce out yet, but I don't like the look. Good idea with the pvc!
Do you own the shop or rent? Wondering what’s a rent cost on a shop that size. It’s my next step for my business.
We currently rent. Someday we'd like to own our own shop. I'm guessing rent is going to vary quite a bit based on location. For something our size I'd bet you'd be between $800-$1,200/month
I appreciate the reply!!
Nice! Where did you get your check valves from? I had to replace mine last year and they both leaked where they molded them together. Crazy.
We got ours from pressuretek.com
Send it bro!!
Full send always!
How do you track the service time in the pressure washer? Can you add a device to track it?
Both the washers we have on the trailer came with hour meters. I believe you can buy them as well
Where di you get your hose clamps?
We got them from Menards, but any hardware store should have them
brand of your water tank?
Use use Snyder Industries Inc for our tanks. They have an outlet local to us that has tanks with slight defects that they sell cheap.
Just don't get the 500 gallon tank bulky heavy as shit even a quarter full..
Yeah that's why we charge extra anytime we have to bring water to a job site. Extra stress on the truck and trailer
Why not just put the guns in the tool box 🤔🤔🤷🏿♂️🤷🏿♂️
Not to be confused with Jayden, Kayden or Aiden pressure washing. Those guys suck.