Unexpected Dyno Explosion On Jordan's Prelude!! How Bad Could It Be??
Vložit
- čas přidán 30. 06. 2024
- Check out my Glasses at TacticalRx.com
Get all your pfispeed merch and parts from Pfispeed.com
Marios been going really hard in helping me! I am super thankful for the Crew oi have around me. Everyone of my Guys Brad, Austin, Nick, Gordo, Jordan, Bret, Chachi,Donno, Bjorne,Erik I wouldnt be able to do what i do without them!!!! - Auta a dopravní prostředky
@1:13 I heard the knock and figured something bad was going to happen, although I didn't expect the crank to spontaneously disassemble itself like that. I had a old Chevy motor do the exact same thing back in the day at redline which locked the engine all the way to the back tires making the next few seconds memorable to say the least. It was also rather expensive to fix all the damage but afterwards it was an animal and to this day is still the nastiest thing I have ever driven. It was a 70 Nova that was so aggressive that there was no point that you could floor the throttle without torching the rear tires until you were going about 90 and the slightest bump of throttle would immediately initiate the pucker factor and white knuckles for anyone in the car. It was so much fun but extremely dangerous.
"That was the best I've ever felt this car feel" Spoke to soon Jamie lol!
classic.......they always run the best right before they go.
They always go well before they blow!
That knocking, was definitely more than just the top end
I think it was a separate issue maybe
My guy said “ I ain’t worried I ain’t worried” my guy was WORRIED . 😂😂
Yesterday your dad said go watch this on your channel, i was wondering where the video was lol.
Where the hell is phong !?? N the red crx love all y’all ❤
I talked to Phong on IG few weeks ago and he’s just taking it easy.
The CRX is tucked away still in his garage and he just needed to walk away from it for a while. He has felt like a failure bc of all of he problems it’s given him with the front suspension. I said to him, now there’s newer technology out now, he shouldn’t have any problems anymore.
@@wolfparty4234 def not a failure let him kno we def miss him n his content !!!! Crx need to come back !!!!!
Phong is anythjng but a failure, he is redesigning the front end in his head secretly and when he stumbles accross the right idea he will knock it out and be back, I love the nitro crx. So bad ass. It is the most impressive build IV seen for sure. All motor, so much r and d
I miss him too.
Phong is a freaking god! Bring him back now!
Need another sign on the floor that says "Don't stand here", or at least, "Cover your nards while testing!" 😋
With Jamie’s Cat like reflexes, saved the engine from a nuclear ☢️ meltdown and explosion 💥 😂😂❤
Really I think that motors what you called grenaded
Thats scary. Thank god nobody got hit with any of the shrapnel.
Lucky no one got hurt, man that thing was on a run hehe. Big Up!
got to love PFI. shit breaks and they are WE GOT YOU and just BAM here is a new crank. also this is why NO ONE STANDS near that engine at all!
fluorescent 1320 shirt guy looks a bit like "STUNTMAN" from Neutral Drop.
Watched your dads channel and waited 36 hrs to get a glimpse of this just to see what happened.
Send it Papi !
Any planned videos on Shonuff please?
Thank You
i was just going to ask about sho nuff as well.
17:40 lol @ the alternator belt takin off like a sidewinder
"Aight imma head out" 🐍🐍🐍🐍🐍🐍
I’m SO glad I was in the bathroom when it happened.
We found the peace that hit the headlight it went out the window !
Damn right jamie ... that quick reaction , saved the head and block ... i was thinking at a min the valves were bent but damn .. that was luck and and jamies fast reaction .. mad props there .. hope its a quick comeback .. and sadly , the headlight is prolly gonna be hardest to gind and replace 😅...peace and love all, keep it rad , stay safe , and build on .. l8z famz
This has been a great advertisement for why I'm going to upgrade to a new damper when I turbo my lude 🤣
Dune Addicts! Hell yeah brother!!
Well you found the noise you avoided looking for the most expensive way now.
Hell ya brother so glad you didn't give up youtube!
That's Crazy! I watched your dad's video after I watched this one and saw the piece that took out the headlight sailed out the window and another couple hundred feet almost to the road! Good thing no one was in front of it!!!
Not the best dyno day, but thankfully the damage isn't worse. Usually, the stock dampers aren't too much of a problem. I guess that's why people get the ATI's. The bolt may have been loose too. You would know more than me 😛
The loss of a 4th gen prelude headlight is tragic...but at least the grille vent piece is still intact...those are very hard to come by anymore...glad nobody got hurt...besides the headlight anyway 😅
5:35 clearly knocking
Wonder why the tables are always missing. Because a bunch of us have them stored away😂
I have one of those tables from a total at the body shop I work at.
Man I thought that was aluminum flying in the PFI video😂🏁🏁🏁 WOW the Carnage😮
Fun video!
Im glad nobody was standing in front of the car!
Was gonna say before the first pull what that knocking was! Thought it was the big fan dancing!
Destruction! That was insane.
Phong is the man miss seeing him around
This car is still cursed. It does not want to continue.
That’s funny. The sign is on the back of the bathroom door so when your motor does blow up, you go in the bathroom and puke from being sick and then you see your shit out of luck lol
alternators fine for sure, i seen it still spinning while yall were inspecting the damage
Always sound their best before they break!
I thought that the pieces were aluminum!!! Ha Ha
them tables are expensive they go for 200 to 400 each when i found out my crv had one i was excited
I don’t know, but I think that thing was knocking at the beginning of the video
Lmao yall crack me up I swear I watch just for the goofy shit yall be on with each other
The owner says hes not worried but half his bottom end is gone.
You could use a much longer crank bolt by the looks and it would hold it all together way better.
that failure is from tightening with an impact!
this is running the best its ever run .. 20 minutes later: hawk tuah
Why were the balance shafts still there? And no ATI or fluidamper? Just asking for issues! Lol!
I thank the h22a has a history of that
It ain't got no rice in it
Man lucky no one got hurt
Oh I have a headlight but if I'm mailing it in your telling Jamie I need a break on the price of an etune lmao 🤣
Ps h capital of the world you need it I probably have it.
Rough couple of months for preludes 🤕🤕
22:55 a crank and a aftermarket ATI super damper harmonic balancer for insurance.
Where did that manifold come from 😂
RIP H22 😢... H23 bluetop time
Very surprising it didn't bend valves. Mine bent when the belt broke at idle lol
going to guess before I even watch the video looked like a headlight went kabam so i will guess either dreaded H22 balancer failure or charge pipe went through bumper and got the headlight. Or the turbo let go but didn't see any smoke from back or front
Don't think them crankshaft like big impact guns tbh but just my thoughts
Most people now days would post it on marketplace saying "needs new balancer $2000 no low balls ik what i got"
Let's go goofy crew 🤪
23rd! GO GOOFY GO! Well, sometimes things go awry! Roger in Pierre South Dakota
Ruff but came out Clean an now to build it better an Safer for Boost 👽👍🏻✨
Wonder if that tick was the warning?
How did y'all not hear that knock/rattle? I would have told dude he has engine work to do before messing around with a re-tune.
Crank bolt came loose with a floppy crank pully + high rpm = "Exhibit: A"
If you need a back up crank I have a crank the comes with a whole h22a4 in Indiana for cheap if you want to come north east
those headlights got expensive af Jesus Murphy a set is like $700
Dang! So, as precaution from now on. No one's allowed in front of a car while doing a dyno pull. That could have ended a lot worse.
Goodmorning goof
I have a mint 55mm crank 95mm stroke
yeeeee
You never want to see an engine autopsy after a dyno run. 😢😢😢
500 + hp I bet the crank just gave up honestly. Shit gets real temperamental running that much power. It will exploit all weakness. At least when it blew there was a good show for sure. That was a good one. And need to get some lexan sheeting to protect yourselves, aka the blast shield. You guys are creative enough that you can make a mobile stand with some lexan anti shatter blast shield material, I’d hate to see someone get hurt by some shrapnel+ everyone stands right there usually and watches
magnaflux the crank before build maybe?
You forgot to balance the crankshaft
That's what I did to my prealude just a lot less carnage
Thankfully no one was standing in front of the car. :/ That's scary, like a shotgun.
Welp.... time for a new engine. I dont think i would trust anything in that engine anymore after that. Also a new headlight
Seeing those hardlines on the primer 😭
Tell me more? The primer and body work was done in 2017
@@GoofyBuiltShane well first of all your never supposed to hardline primer leaves it noticeable when you paint second of all you didnt add enough wiper flyid reason as to why it blew the headlight
Hahahahahahhaha wiper fluid dammit your right, we didn’t do the body work was done right before we got the car but thank you good to know
Jamie's car and this car is their any reason or thought as to the problem? Overnight timing belt over torqued bolt? Or maybe under torqued?
Jamie’s was slightly different as it broke the main’s this car literally just broke the snout off the crank and sounds like we aren’t the first or only H car to have this issue
@GoofyBuiltShane ok so kindof just bad luck on both lol
Never seen nothing like that
I know what was going through Jordans head when this happened... Its not a fun place to be.
What I am getting is that if you have a 20 year old or older Honda replace your damper
This is why you don't stand near a car when it's on the dyno. A lot of folks get way too comfortable with it these days
It's under the tool box
unbalanced engine internals?
Well
You should never have balance shaft in high performance engine if the cams are stock cams ok but aftermarket they have to go because they don't work with aftermarket cams.
Only used for a smoother idle with stock cams if there gone free HP
Cams on engine are stock. And the balance shaft belt is deleted just leave the shafts in for oiling purposes
“We do better aT car show’s” na bro y’all killing it w the content even through the bad, you don’t get to the top without braking shit and spending big $
Unexpected??? But......But.....you can hear timing belt tensioner noises at the start of the video when hes bringing the car in on the dyno
Jamie is responsible he needs to pay for it . He’s not a certified tuner
Bro that's why I havnt been seeing any of you're videos. Somehow I got unsubscribed from you're channel that's bogus as hell that CZcams doing that crap ton people.
I hear Matt and Shane's secret podcast and have owned a 3 Gen prelude since 93, I am here for this 😊
#STAYGOOFY
fluidampr sti for the win or H22 or H23 cranks no good like a D max
Car sounds like shit at the beginning of video
Rip it out and build a new one
Sad. So Shity that really sucks. 😢
😜👍🇦🇺
Well. That's not super great
I gotta h23 head and crank if y’all need an extra
We're all kid's a couple day's ago come on Jamie tell use about your teen age years