Tool bag tour
Vložit
- čas přidán 5. 04. 2019
- Low voltage & A/V contractor's tool bag tour. What tools we carry in our primary tool bag and why. When you work with so many different systems, like network and phones, catv, satellite, cctv, security, audio, video, home automation, etc, these are some of the tools used routinely.
- Věda a technologie
Love the video. Great quality tools. Good tools equals respect!
Right! Not to mention less frustration..
I enjoyed that, thanks. I'll be getting one in a month or two. Have to go on my Christmas list.
Great video and set up. Thank you.
Cool bag man! Lots of pockets and space!
The M12 2402-22 is your answer to a compact drill/driver with a hex chuck. The only time I brought out the impact or hammer drill was for masonry, large hole drilling, driving/removing lags or stubborn screws. I found the hex drill/driver to be perfect for low/med torque screwing and drilling... still my go-to 90% of the time, although I'm no longer in the tech install business.
Thanks. Finally, some competition for Veto. I particularly like that center section. I am currently using a Veto Tech LC and a plastic flip top box for my cabling stuff. I also appreciate some of the useful tool suggestions like long reach sharpie, mini magnifier and the breakout connector for RJ45 cable. Subscribed…
Thanks for the comments!
Good organization of your tools
Cool vid. Thanks!
Good video! I saw Scott's video so I had to watch your video too. Really interested in Velocity tool bags. I'm waiting for the back pack Great tips. The black hot glue sticks, a must have. Regarding small flashlights, i use Olight they make one called a Baton its about 2 1/2 " and has different light levels up to 500 lumens (an $50.) They make a smaller $10 model that works off triple A batteries. Easy to store. I'm a headlight fan. I bought a small camera bag which i store my headlight in. It protects it and i attach with a carabiner to the side of the bag so its out of the way and its bulk isn't inside the bag. The camera bag also have small addl zipper compartments to store extra batteries. Best buy sells them for $15. I keep a wire hanger but 12 guage wire is great idea. When fishing in insulated walls i use the Fishpull but my circular YFT FIBER GLASS 15 ft snake with a chain is the best fishing tool i own. I hardly carry my bag i wheel it everywhere and only lift when going up stairs or moving it from one spot to another.
Thanks for the video and sharing an awesome setup.
Thanks for the great comment and info!
Keeping your tip clean is very important for a lot of reasons.
I suggest you look at the Bucket Boss Parachute bag for keeping fasteners and misc items. It is extremely handy to have in your gear. I got mine on Amazon.
Nice tools
Hot tip. Use a fishing tackle tray from plano for your read stock
Thanks for the tip!
Very very very nice
Black glue sticks are a must. Instead of a glue gun I carry a small butane torch (about the size of a lighter). I heat the glue stick and apply it to the emitter much like chapstick.
Black glue for the glue gun, paper clips for reset buttons... your bag literally has all the solutions my bag is becoming too small and I am looking to upgrade but anyways great vid and excellent tools
"You gotta keep your tip clean".
M12 FUEL SCREWDRIVER. AWESOME DRILL/DRIVER WITH A HEX HEAD THAT DOES NOT IMPACT
Thanks!
If you haven't found a good organizer yet. You may want to consider gamagatzu fishing boxes. You pick the size of each inner compartment and it's well made. I really like mine. Bosch has the freak as well for drill and impact. 12v but it's another battery line to invest in
Thanks! I'll check them out.
I love Fluke but unfortunately my wife says no.
Very cool set up 😎👍
Thanks!
Where do you find the black glue sticks??? Thanks
What brand is the zip tie pouch? I can't find a replacement for my Skywalker pouch that someone else obviously needed more than I did.
7.31" L Cable Tie NAT PK 100
by Lighting Sales LLC
Learn more: www.amazon.com/dp/B0763JX7F4/ref=cm_sw_em_r_mt_dp_U_NPMIEb7HTAVT7
Nice video. Whats the name of the zip ties cutter please ?
You need to get those knipex twin grip pliers for those stripped screws
Man, you are loaded for bear haha! Good stuff - thanks for sharing. So you use your impact driver as a screw gun then?
Yes, I do, along with some light drilling.
Rockwell makes a combination impact and drill 12 Volt
I have a sneaky suspicion that Veto will eventually bring out a bag to take on the Rogue 6.0
Hello, you asked for an impact driver that can be used as a drill or fastener without impacts.
Well, checkout the Makita XPT02Z 18V LXT® Lithium‑Ion Brushless Cordless Hybrid 4‑Function Impact‑Hammer‑Driver‑Drill
I have it, and is very convenient.
Not as powerful as separate purpose specific tools, but has been enough for most of the jobs I have used it. For drilling concrete is a little bit slow, butngetsnthe job done.
The only thing, is that the Chuck is 1/4 hex, so it does not take regular drill bits, but I also got a Makita regular drill Chuck with a 1/4 hex adapter to attach it to this tool, for those cases. Most of the time I use 1/4 hex drill bits.
Just a unibit, and hole saws, I use with the converter Chuck.
Thanks for the tip!
What is the manufacture and model of the blue breakout puck you show?
Hi Ronald, I've had that for probably 20 years, but it looks like it is still around:
Eclipse Tools 900-244 Pro'sKit Banjo Adapter, 4-6-8 Pin
by Amazon.com
Learn more: www.amazon.com/dp/B00OSLCZ6O/ref=cm_sw_em_r_mt_dp_U_4d5HDbEZDRF7V
How did you purchase one of these? I'm assuming you're in the USA, if not my apologies! I can't figure out how to get one :(! It's a really nice bag, I've done apartment maintenance for 13 yrs and have been on the lookout for the perfect bag and yet to find it. I own three vetos even an occindental tool belt set up. Looking at the Roque I think this might be the one!
What brand ball screwdriver is that? Where did you buy it for? Thanks
My co-worker got it on eBay. I think he did a video on them; his channel is Scott's tool thoughts.
bellissima borsa
Grazie!
Great set up and video, must be 80lbs though.
Thanks; Right around 60lbs. I use a portable cart when possible.
bellissimo
What price and where did you purchase it from?
Hi nyhsmark; I got this bag from a UK company. It was just under $200.00. www.velocity-progear.com/collections/tool-bags/products/rogue-6-0
Bootleg VETO!!😁 Just kidding man nice bag
I can see that; I have a Veto also, they are definitely built more solidly. This bags layout works better for me though.
Makita makes a drill, hammer drill, and impact in one. I believe they call it a Makita hybrid.
Thanks for the info; I'll check that out.
18-Volt LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver by Makita
Hi good
Well, it's more of tools tour than tool bag tour
Milwaukee 2505-22 M12 FUEL Brushless Installation 4-In-1 Drill / Driver 2.0Ah Kit
Thanks for the tip!
SO WHERE DID YOU GET YOUR BAG FROM AND WHAT DID IT COST YOU??
Direct from Velocity, around $200
Cuál es el nombre o código del bolso y dónde lo puedo comprar
Hey man great video !! where did you get the small yellow ratchet ? I will like to get one Thank you
My co-worker got it on eBay. I think he did a video on them; his channel is Scott's tool thoughts.
Thank you for the fast response !!!
Do you use a fork lift to carry your tool bag around lol
if you see a low voltage guy with a hammer and utility knife ... RUN!!!!
:-)
what is the make and model of the bag? Do you have to sell on Ebay?
Looks vaguely familiar...
Scott see what you started! Scott for President!
Ha Ha! Thank you Sir!
Who is ‘Scott’?
He's a co-worker; his channel is "Scott's Tool Thoughts"
How much it's cost? Sir
I got this bag from a UK company. It was just under $200.00. @t