Hegner scroll saw. How to use a scroll saw. (beginners)
Vložit
- čas přidán 18. 04. 2020
- Hegner scroll saw. How to use a Hegner scroll saw. Taking you through some of the basics you need to understand to be able to get the best from your Hegner scroll saw.
Some ideas that should prove useful for both beginners and more advanced Hegner scroll saw users. Showing the methods we use to set up our Hegner scroll saw and a demonstration of how to use the Hegner scroll saw.
For the free scroll saw patterns, please refer to the dedicated page on our workshop website by following the link below.
www.thelovespoonworkshop.com/...
Use the link below and enter the discount code: lovespoons at the checkout for a 10% discount on all Starbond products.
bit.ly/3leQt7U
Insight into Hegner scroll saw accessories is also provided. More information can be found on the Hegner scroll saw website by following the link below.
This is not an affiliate link and only included in the hope it might prove useful.
www.hegner.co.uk/
#hegner #hegnerscrollsaw #scrollsaw - Jak na to + styl
I just inherited one of these beauts and scrolling is new to me, so this video was a solid introduction on how to use it and some good ideas for what to make with it. Thanks for the vid!
Hi Kevin,
Delighted to hear that the video was useful. Scroll sawing is great fun. So many different things you can make with it. Hope you enjoy working with your scroll saw.
Thank you for the positive feedback. Hope you have a happy and healthy Christmas and New Year. All the best from us all here at The Lovespoon Workshop. 👍👍
Nice vid, very informative. I must invest in one of these, such a time saver.
Hi Gavin, great to hear from you. The scroll saw is a great addition. You will see second hand Hegner scroll saws regularly available on Ebay and you can get spare parts for pretty much everything from the hegner Web site. Getting the right blade and solid base is the key but you would enjoy working with it, It saves a lot of time compared to the coping saw. The finish is also better and far superior to a band saw. It is a key part to everything we do.
Thank you again for sharing your work with us and for supporting our CZcams channel. We have had lots of positive feedback on your lovespoons and designs. I think it might become the first of a new playlist for our CZcams channel. Stay safe, all the best Dai 'lovespoons' Thomas.
Nice video I have been scrolling since the early 80’s had several scroll saws over the years some pretty expensive none compares to my Hegner the closest was very inexpensive Central Machinery made on the Hegner pattern it was far better than say the DeWalt I liked trying different saws but once I got my 1983 PolyMax I never found anything close to it great video thanks for sharing
Hi Jerry, great to hear from you. Our Hegner scroll saw is a really important part of what we do here at our family workshop with the Welsh lovespoon. When dad started using scroll saws he first had a delta scroll saw and he found it would drift and the blades would go out of shape, it didn't last long before he realised we needed a better option. He chose the Hegner and it has done a brilliant job.
Thank you for your feedback, delighted you enjoyed our video, all the best from us all here at The Lovespoon Workshop. 👍👍
Good sharing !
Well well done!
Thank you, all the best from us all here at The Lovespoon Workshop. 👍👍
@@DailovespoonsThomas Many thanks for your reply so quickly !
I'm enjoying theses videos a lot, very informative and interesting. Great work. From the Rhondda :)
Hi Adrian, great to hear from you and delighted to hear that you are enjoying the videos. We love to be able to share the work we do here at our family workshop with everyone. Let us know if you have any specific areas you would like us to make a video about.
Thank you for supporting our CZcams channel. All the best from us all here at The Lovespoon Workshop. 👍👍
GOOD MORNING MY FRIEND! WHAT IS THE BLADE WIDTH?
Hi Fabio, great to hear from you. It's a reverse tooth number 9 blade we use. The blades we use are pinless and our own favourites are the Niqua Speed blades. Pegas and Flying Dutchman also do their own version.
Thank you for supporting our CZcams channel. All the very best from us all. 👍👍
Thomas hope all well just one more question!! You always talk about number 9 reverse blade what is the correct name so I can order, thanks M
Hi Mick,
Blades are really important when it comes to working with the scroll saw. We work in hardwood, usually between half an inch and an inch in thickness. The best blades for working in this are the 'Niqua speed number 9 reverse tooth blade' and also the 'Flying dutchman number 9 reverse tooth blade'
It has been more difficult to get hold of the Niqua blade recently but the Flying Dutchman blade is just as good. Don't mix the Niqua speed up with the Niqua Fix because those blades are useless for hardwood.
It's also worth noting that if you are working in something other than hardwood then a different blade will be more suitable.
Here is a link to the supplier I currently use for the Niqua blades below. They have lots of other blades available too.
www.ebay.co.uk/itm/Scroll-Saw-Blades-NIQUA-SPEED-5-130mm-2-0-14-Pack-12-144-pcs-Made-in-Germany-/312442344405?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Hope that helps, thanks again for supporting our CZcams channel. All the best from us all here at The Lovespoon Workshop. 👍👍
How can I fix the tensioner of the multicut 2 s saw, since when cutting the wood it loosens and I cannot continue cutting.
Hi Dina, great to hear from you. Might be worth sending a few photos to get a clear idea of the issue you are having. You can email them to info@thelovespoonworkshop.com
It is a different issue depending on whether the tension is on the back arm or the top of the machine. Look forward to hearing from you. All the best from us all here at The Lovespoon Workshop. 👍👍
@@DailovespoonsThomas Thank you very much
You're welcome, thanks again, all the best from us all here at The Lovespoon Workshop. 👍👍
Hello, excellent video, I am writing to you from Argentina and I want to ask you a question, my machine vibrates a lot and that affects my quality at work, how could I do to solve this?
Hi Bruno, great to hear from you. Glad you enjoyed the video. Excessive vibration can be one of the biggest issues when setting up and using a scroll saw. Firstly, you need to make sure that you have your scroll saw base bolted to the floor. Secondly the scroll saw needs to be bolted to the base. Next you need to check that you have the correct amount of tension on the blade. Thickness of wood and type of wood needs to be considered when selecting the appropriate blade for the job too. I cut wood between 1.2cm and 2.5cm thick and use a Niqua number 9 reverse tooth blade. Sanding the wood flat on the back can also help reduce vibration. This allows it to sit on the scroll saw bed nice and flat. In regards to technique I guide the wood with one hand and hold the wood down with the other hand. Not feeding the wood too fast and letting the saw do the work can also help.
Hope some of those ideas help to sort out any issues you are having. Thanks for getting in touch and supporting our CZcams channel.
Requerdos de todo el mundo aqui en nuestra taller. 👍👍
Saludos.
@@DailovespoonsThomas Thank you very much for your response and your kindness, I will put all these recommendations into practice and I will continue learning by watching your videos, thank you very much
You're welcome Bruno, I hope it sorts out the issue for you. Scroll sawing is great fun and if you can sort out this issue you will enjoy being able to make so many different things.
Let me know if you need any help or have any other questions. We always delighted to be able to help if we can.
Thank you again for getting in touch and supporting our CZcams channel. All the best from us all here at The Lovespoon Workshop. 👍👍
Saludos
Please can you tell me the value of the machine plus shipping cost to Chile.
Hi Dina, whilst we own two Hegner scroll saws we don't actually have any association with Hegner other than using their scroll saw. The current price for a Hegner Multicut 2s is around £750 and I have no idea of shipping costs. I have attached a link below to help you out.
www.hegner.co.uk/hegner-multicut-2s-scrollsaw-230v-100w.html
Thank you again, all the best from us all here at The Lovespoon Workshop
👍👍
How are you nyc video
Hi Bernard, we're all good thanks. Hope all is well with you too.
All the best from us all here at The Lovespoon Workshop. 👍👍
Virtually no one uses the hold down!
Hi Terry, great to hear from you. We have three of us who use the scroll saw here at our family workshop on a daily basis. Myself and dad do not use the hold down arm but my brother always uses it.
Additionally, when I taught my wife to use a scroll saw she found it gave her confidence to use the hold down arm because she found it difficult to hold the wood down without the assistant of the hold down arm.
Our videos are focused upon helping everyone to enjoy wood carving, scroll sawing and wood work. Whilst some may have no need to use the hold down arm, it could be the very thing that helps others to enjoy working with the scroll saw and achieve success.
Thank you again for your thoughts and supporting our CZcams channel, all the best from us all here at The Lovespoon Workshop. 👍👍
SPEED ?
Only ever worked with single speed scroll saws so that would be maximum speed on a variable speed machine.
Thank you for supporting our CZcams channel, all the very best from us all. 👍👍
@@DailovespoonsThomas Interesting My HEGNER is Variable Speed.
Hi Richard, thanks for getting back to me. That's absolutely right you can buy either a single or variable speed Hegner. For the work we do the single speed is perfect. On a variable speed machine I believe it is the same as working on top speed all the time.
Thanks again for getting in touch and supporting our CZcams channel. All the very best from us all. 👍👍
Please turn down the volume on you intro and exit music, very annoying. Thanks.
Hi James, thank you for your feedback. We are constantly changing and evolving our CZcams channel. So will bare this in mind for the future.
Thank you again, all the best from us all here at The Lovespoon Workshop. 👍👍