Milwaukee Tool M12 FUEL 1/4" Straight Die Grinder Review 2486-22

► 3M Roloc 2" Disc Pad Assembly: amzn.to/2OFzBIE
► 3M Roloc Bristle Disc Grade - 120: amzn.to/2OInb2P
► 3M 01397 Green Corps Roloc Green Disc: amzn.to/2B2N3hR
► 1/4" x 1/8" Reducer Collet Reducing Adapter for Die Grinder: amzn.to/2T4YcYj
► Double Cut Carbide Rotary Burr Set: amzn.to/2TuWa5f
► Shank Mounted Flap Wheels: amzn.to/2tscBVx
► Rotary Thread File Review: www.youtube.com/watch?v=VyERF...
- Buy on Amazon: amzn.to/364Vp5T
► Milwaukee Tool M12 FUEL 1/4" Right Angle Die Grinder Review (2485-22): • Milwaukee Tool M12 FUE...
- Buy on Amazon: amzn.to/2u4DQWn
► DEWALT 20-Volt XR 1-1/2" Die Grinder Kit Review: • DEWALT 20-Volt XR 1-1/...
- Buy on Amazon: amzn.to/2FW8W56
Milwaukee Tools new M12 FUEL ¼” Straight Die Grinder might replace your pneumatic die grinder! By ditching the hose, you gain greater mobility and access along with up to 0.3
HP performance, 3-Mode RPM control, and a very familiar platform.
This new Milwaukee M12 Fuel Straight Die Grinder is similar in feel to the M12 FUEL ¼” Right Angle Die Grinder. Both were made to be similar to the feel and use of pneumatics. You can feel that in the trigger design and feel. What you won't get with an air die grinder is 3-Mode RPM control!
In this video we test out a few scenarios to let you know the battery life, proper sizing of the accessories and an expectation of tool performance. We hope this helps with your purchasing decisions.
#MilwaukeeTool #DieGrinder #Metal
Specifications
M12 FUEL ¼” Straight Die Grinder Kit (2486-22)
 RPM: 0 - 21,000
 3-Mode RPM Control
 Power Output: 0.3 HP
 Collet Size: ¼”
 Length: 11”
 Weight w/ battery: 1.6lbs
 5-year tool warranty, 2-year battery warranty

[@09alvaha]

Very fair review, I appreciate and I'm sure others do too, you not just outright upselling this tool and overlooking its weakness' like other reviewers tend too do!

[@wayfastwhitie455]

I pre-ordered mine a few weeks back and looking forward to when it comes in. Glad this review went well though, makes me feel good about the purchase. Thanks

[@richardberryhill718]

Thanks for clearing up the collet issue! I had a heck of a time removing the carbide bit I used. Then I saw your video on the silly collet "non-assembly" and put mine together correctly. Perfect! It's a mystery to me why this is not done at the factory. It is far to easy to over look reading the manual, and the manual was punctured by the tool right at that section where the manual tells you to push hard to assemble the manual to the collet nut. Works fine now!

[@Mohammad-qi5pf]

Sir you are the best I'm really thankful to you .

[@robertgroff4938]

Great information about the collet in the beginning of the video. I was having issues with mine until I watched 👀 your video. I'm now a subscriber.

[@AntonioClaudioMichael]

I love my Milwaukee right angle fuel die grinder I use the 6.oah batteries on them I will be picking up this new straight die grinder thanks for the info

[@joshperloff9179]

I think this was a great review it answered a lot of questions and I really appreciate it thank you for posting it. I think based off of your review at 18 V Milwaukee or possibly going over to the Darkside with Dewalt will be what I should do for automotive

[@RyanRKJ]

Interesting little tool. I use my 1/8" rotary tool a ton, and it sometimes feels a little small for the jobs I put it up against, so I'm doing some research on slightly larger tools.

[@Ryan-rm2qk]

Thanks for this review! I have been skeptical on these tools for my needs for aluminum welding and repair.. I have mostly dewalt stuff and it looks like I’ll be biting the bullet and getting myself a cordless die grinder

[@trashes_to_treasures]

Thank you for the really helpful review, especially regarding the comparison to 18V grinders and pinning down where that tool is useful!

[@chrisjones6165]

I use the 18 volt version to clean out welds where regular grinder won't fit. Great tool wish it had a light though

[@joeframer9642]

Great channel...between my Dewalt die grinder, m12 rotary tool and m12 right angle die grinder, it doesn’t look like a tool I need. I like my very small pneumatic straight die grinder much better.......👍🇺🇸

[@williamdavis922]

I've been waiting patiently for this, to go with my 90 degree

[@spelunkerd]

Brilliant summary, well done.

[@sabysexy]

I'm new to Dremels, but this thing has been great.

[@Dr_Xyzt]

After doing a fair bit of metal fabrication recently, these tools are probably intended for material that's already clean and just needs some mild surface preparation or deburring. Otherwise, I'd slap on the ear plugs, kick on the air compressor, and go to town.

[@noahreive1868]

I just used mine with a small flap wheel for rusty doors worked perfect even with just 2.0 battery

[@colinstu]

I don't know why I was never able to find 1/4 to 1/8 collet adapters before, but thanks for reminding me! And they do exist now..

[@antonioc3768]

great honest review !

[@MrConspark]

Great video, I know the next M12 that I want to buy now