You can also keep the replica closed and just remove the mag. Lock the bolt back and use a long enough flat head to adjust the hop. And the stock gm mags work perfect without the need to change the feed lips. Actually like using them better than the lancer mags. With stock nozzle. No issues for almost a year now
@@ravenbeaked without taking mine I believe clockwise to add. Try taking your inner barrel and hop out and manually apply pressure to make sure it moves properly
Thank you for letting us know! :D I also tried with my guns modify I was surprised of it working as like the last gen with the noveske n4. It wouldn’t even fit -_-
Nice review video as always. Any idea why the cgs lancer mags double feeds? Yes it’s compatible and it sits. I’ve noticed it with my DE N4 + Cgs lancer mags setup.
So after testing some Double eagle mws n4 rifle with EMG CGS lancer magazines we notice it's still fine. But depending on how the rifle is loaded we notice that will double feed when the rifle has already one loaded in the chamber and it will shoot two at once for double feeding. If it continues to happen I would suggest check the feeding part of the nozzle to see if there is any damage or part of the lip on the magazine that can causes double feeding issues.
You can surprisingly swap uppers with this! The only concern I have is the lower how it does not have a Zet plate which means the bolt catch is only stopping the BCG 😬
TBH that's my fault, I was too hype in modifying the rifle as the first thing I did was replaced the inner barrel with a 6.03 tightbore barrel that is 190mm as I would change it to the PDW suppressed version. The inner barrel is about 170mm original length. You can run a tracer unit on the rifle but unfortunately what is blocking it is the PDW muzzle break that gets in the way. Underneath the muzzle break is a standard 14mm negative thread though.
as for the normal npas.. hmm I don't really know about too much. As for the lower cqb nozzle yes we do! I'll go ahead and send the link for the lower pressure version. Unicorn Airsoft MWS Power Nozzle Valve Low Power: www.airsoftmaster.com/unicorn-mws-power-nozzle-valve-low-power/
You can also keep the replica closed and just remove the mag. Lock the bolt back and use a long enough flat head to adjust the hop. And the stock gm mags work perfect without the need to change the feed lips. Actually like using them better than the lancer mags. With stock nozzle. No issues for almost a year now
Thank you for the update sir! 🫡 glad to see that the improvements are being made!!! 😎
@stacyjackson1255 do you turn the flathead screw clockwise or counter clockwise to increase hop? each way I go it seems like there is no difference.
@@ravenbeaked without taking mine I believe clockwise to add. Try taking your inner barrel and hop out and manually apply pressure to make sure it moves properly
I actually fit a DDM4 upper on MTR16 lower and it works normally. It only takes very little filing.
Thank you for letting us know! :D I also tried with my guns modify I was surprised of it working as like the last gen with the noveske n4. It wouldn’t even fit -_-
I love the blackout 🤙
I appreciate the comment sir!
Nicely done review, looks like a real winner! Do you all sell that optics combo? If not, where do I get one?
In regards of the combination unfortunately no, :( the mount I did get from PTS unity riser and the as well the magnifier mount. :D
Nice review video as always. Any idea why the cgs lancer mags double feeds? Yes it’s compatible and it sits. I’ve noticed it with my DE N4 + Cgs lancer mags setup.
So after testing some Double eagle mws n4 rifle with EMG CGS lancer magazines we notice it's still fine. But depending on how the rifle is loaded we notice that will double feed when the rifle has already one loaded in the chamber and it will shoot two at once for double feeding. If it continues to happen I would suggest check the feeding part of the nozzle to see if there is any damage or part of the lip on the magazine that can causes double feeding issues.
Do you know if the upper can be swapped between the mws? Looking to build an upper for it
You can surprisingly swap uppers with this! The only concern I have is the lower how it does not have a Zet plate which means the bolt catch is only stopping the BCG 😬
will you guys be reviewing the other 2 daniel defense GBBRs? im having a hard time trying to find the DDM4 RIII mk18 and m4a1 reviews
Let me see what I can do with the other two if I can get my hands on them :D
Somebody needs to explain why are they so expensive,and not even a real gun or real steel and never worked out of the box 😢
Is the PDW discontinued?
I don't want to tell you bro sorry 😅
It looked like the inner barrel sticks out in the quick view you showed.. will it run a tracer
TBH that's my fault, I was too hype in modifying the rifle as the first thing I did was replaced the inner barrel with a 6.03 tightbore barrel that is 190mm as I would change it to the PDW suppressed version. The inner barrel is about 170mm original length. You can run a tracer unit on the rifle but unfortunately what is blocking it is the PDW muzzle break that gets in the way. Underneath the muzzle break is a standard 14mm negative thread though.
Yeah so take the muzzle device off and I’m good for a tracer
@@AirsoftMasterTVand thanks for getting back to me… other question do you know if normal mws npas work w the cgs bolt carrier group
One more question the lower pressure cqb unicorn nozzle you were talking about.. you sell it? That anx a better barrel the original short length
as for the normal npas.. hmm I don't really know about too much. As for the lower cqb nozzle yes we do! I'll go ahead and send the link for the lower pressure version.
Unicorn Airsoft MWS Power Nozzle Valve Low Power:
www.airsoftmaster.com/unicorn-mws-power-nozzle-valve-low-power/
That's just a toy👎🏻