Custom Brake Ducting and Brake Backing Plate Install | vlog 071
Vložit
- čas přidán 13. 09. 2024
- In this episode I install Condor Speed Shop's Brake Backing Plates on my BMW e30. I do a custom DIY installation, routing the ducting through the lower tray for nice custom look. This e30 is starting to look like a race car!
E30 Brake Backing Plates from Condor Speed Shop: www.condorspee...
Support my friends at eEuroparts! goo.gl/iS6z2q
Black Flagged merchandise is now available!!!
www.getblackfla...
Black hat: bit.ly/2HrzxpT
Camo hat: bit.ly/2BD7WBV
Stickers: bit.ly/2C7MnKD
Keychain: bit.ly/2HtzsCg
This is a vlog following my journey to become the best driver I know.
Black Flagged was born from a desire to just get out there and do what we wanted. Racing, drifting, rally, endurance-whatever we can do to get our wiggles out. We're a race team, a tribe, a community, a media house, and a content provider. We don't claim to be the smartest guys on the track or the authority on motorsports, but we know what we like and we'll give it our all to make it happen and make the best stuff we know how. We try harder.
Currently building an e46 m3 (2005) and an e30 (1991 318is).
Please subscribe and follow along on the journey!
Also follow along on my other channels:
Instagram @getblackflagged
Twitter @getblackflagged.
www.getblackfl...
Shot on:
Canon 5D Mark II
GoPro Hero 5 Black: bit.ly/2zPmwmq
GoPro Hero 5 Session: bit.ly/2z7qZku
Edited in Adobe Premiere.
TV Color Bars - Distorted with Static and Timecode by Joe Jabon: • TV Color Bars - Distor...
John Madden Ace Hardware commercial by RetromercialBilly: • Ace Hardware with John...
Song: Simon More - Dreamland (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Supermoon by x50 @x50music
Music provided by Free Music for Vlogs • ** No Copyright Music ...
Rock Angel by Joakim Karud / joakimkarud
![Have Engine Cooling Issues? Watch This NOW | Motorsport Ducting Basics [#TECHTALK]](http://i.ytimg.com/vi/Fnmc_uJv54w/mqdefault.jpg)
Great find with the downspout adapters! That's being resourceful
Just randomly found your channel, instant sub. Nice work man
Rad, thanks!
Great job!!! I love the way it all looks
Thanks!!!
I keep bits of 2x4 wood around for different things. One being to act as backing behind flimsy materials that I need to use a hole saw on. You could go as far as tacking the plastic down on either side of where the pilot hole will be with a couple wood screws.
Thanks for sharing.
I think we're going to get some of these for our RX8 enduro 24 hours of Lemons car. but I would think this would be overkill for a street. Don't get me wrong great vid, and DIY, sometimes its just fun to make stuff.
Protect those thin hoses with a rubber coating so they don't get ripped in half from road rocks
you are my favorite youtuber 👍🏻
Awesome, thanks!
Love bears, others no longer manufacture, you take care of one, you have all my respect :P
Another great vlog 👍👍
Thanks!
6:51 when he learned the basics of drilling
need to see some 46 m3 i saw the e30 alot latly keep up the nice work
I agree! I’ll start working on one
Hmm, U mounted to ducting like that. Great and smart (and ofcourse clean) but im thinking now. How does it moves when u turn?! Is the movement so small that it just ""stretches""? Would like to see it in *action*
I made sure all the slack in the hose is by the backing plate (as opposed to under the car between the two holes), so there’s enough slack there to move with the wheel. I’ll try to get a video of it soon
Okay nice done :) Hope to see it :)
ever make it to Sema?
ya make it clean you'll go far
🇫🇷 Clean and cool ..
Thanks!
What type of ducting tube did you get and from where? Also, leave the other vent open, it will reduce the negative pressure that is created in the wheel well.
I used this hose: www.condorspeedshop.com/collections/e30-parts/products/copy-of-3-neoprene-brake-ducting-hose
And good to know about the other vent, thanks!
Thanks again for the link. That's a pretty good price. Having a hard time finding good tubing at a reasonable price
Came across that when dealing with canards. Canards have to to be 2/3 of the way up between bottom of front bumper & top of wheel well, so the air gets deflected into the wheel well to help disperse the negative pressure.
Wye u not hone in disk plate✌️
Question, will the brake backing plate fit the e46?
GREAT video keep up the work
Did the mod improve stopping distance, brake life?
May be l m not an M BMW owner (i have a BMW 330d e46 2003 ) because of the gasoline price 1.50€ à liter ... but M BMW is my dream car ... 🇫🇷
M or not, they’re all great cars! 👌
Jalal Had it was 1.50 for the longest time here in the netherlands. Gasoline now costs 1.65. My 330ci loves it though😂
little bit smoother talking in the future would be great, but still a great vid man!
Thanks