Restoring an old wooden mirror with Dremel Wood carving.
Vložit
- čas přidán 24. 08. 2024
- Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and diskskutzall.com/?af...
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
Shirts and gear
jordy-johnson-...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.c...
etsy.me/2Usrss6
/ carving_fusion
#woodcarvingbeginner
#carving #woodcarving #carvingfusion #Jordyjohnsonwoodcarver
#Jordyjohnson
#howtowoodcarve
#Howtowoodcarve?
#Beginnerwood
#dremel
#Woodcarvingideas
And just saying I love carving pine, it’s super soft and easy to carve, and depends on when you carve it rather it’s sticky or not but it’s always a mess that’s for sure, I found a red tree I’ve been carving and it’s beautiful when I finish it, much harder than pine but beautiful, I’ve been learning for the last two years, love doing it, good job Jordy
Jordy tree swallows are the dive bombers of the sky! I liked the first silver infusion but the end product is just as good😊
Thanks rick
That turned out awesome Jordy, way better than I imagined. 👍👍👍
Thanks mark
heck yea that turned out looking Awesome!! nice restore job!! thanks for the video! love the dremel carvings Stay safe!!!
I gotta like Jordy. Who wouldn’t?
Great video Jordy! I'm going to mention this in the next episode of Wood Carving Weekly.👍
It turned out beautifully Jordy, all the colours you tried only gave it move depth and variety!
:) thanks claire
Love this final finish!
Thank you for your tutorial
Patricia
wow awesome carving turned out fantastic take care Jordy
This project looks so good Jordy.
Thank you
Great work Jordy! A work of art!
That sticky dust is good fire starter
Loved watching your process on this, and really love how it turned out too. I agree about carving the pine and how the dust sticks to the piece you're carving. I had to use a brush alot on the pine pieces I've carved. On the cedar carvings, it seems the dust comes off a lot easier. The pine seems alot harder of a wood as well, at least in my experiences. Great video, Jordy.👍😊💖 These shallow relief carvings are great ideas for the fence board bird houses too. Now after watching this, I'm going to be on the lookout for some old chunky wood furniture that I can carve up. I have seen some beautiful woodcarved furniture that had the white wash, and that can look pretty nice too. Several of those pieces had the wiped off white wash and then some gold or silver metallic highlights, like a rub n buff or some other metallic highlight, but they were all pretty.
Another 😎 idea and super carving 😃😃👍👍
Great Video
We learn with " mistakes" not with full perfection over years
in this case was great
thanks for sharing
Thank you
Well done Sir, looks excellent!
Holy sh!t, that came out really nice! Thanks and take care.
Wow what a beautiful piece ❤ i bet it was lots of work to get it to work. And it flows really well. Thank you for the inspiration and carry on
What a gorgeous piece.......❤ it !
That's definitely the pine resin that makes it so sticky . Usually have to burn the burs off to clean them up because they will stop cutting.
Looks great jordie.
Looks AWESOME, Jordy😊
Thank you
I love it! You did it again!
Thanks Jordy, you just gave me an excuse to go yard sale/ thrift store frame shopping. 😂 LOL. Yah pine dust really piles up in the cuts. It's called carve and vacuum carve and vacuum 😂 Be well my friend...
Lol :)
Thanks Jordy
Cool cool good carving bro stay awesome
You DA man JORDY❤
looks great Jordy
THAT'S COOL!!!!
I love it all! Yes, in some cases you need patience, for many of us, well for me, it's a Zen time! For pine, it's quite resinous, so yes, soft to carve but I think it's probably the oil residue! Your finish it's like very old stone!
I can't find the milling burr... Could you add it to your Amazon lists please?
Long story short, that mirror looks better than it ever did! LMMFAO 😂😂! with you doing all the different stains and paint! WTF is he doing?😂 I always know it’s going to turn out beautiful! My first carving I ever did 20yrs. ago, I should say etching, was on a mirror. That’s why I got a dremal in the first place. I did a dragon on it. I had this Mexican friend that had a low rider car club, he saw that dragon and wanted me to put his club logo on his back windshield. Turned out ok, he loved it! Wish I still had a pic. of it. I’ll send a pic of the dragon. Good stuff!
Send it
Hi Jordy.
Love it, beautiful!
Thank yoy
Awesome idea🌟
Great job
Swallow's, Jordy.
Tried to draw a green man like you. My hand hurts just thinking about that much carving. I see it but it doesn’t make it down my arm to my hand sometimes.😮
Haahah lol u can do it
@27:50 sticky sawdust residue...
Yes, I have found that pine can be sticky and have the same sawdust that you are showing, AND have the same issue with old oil/shellack based stains and paints... i think they get hot from the bit and it gets sticky.
So, having both on one piece like you have there seems about par.
I've repurposed thrift store furniture and a lot of it is pine and old cheap paint... it always does this and is a major PITA! 🤬
At the end you asked of anybody used whitewash, i do both on nearly all my pieces, and use a light oak stain first, then at tires looks great when carved through to the fresh wood, then color in the text or art and a final 0000 steel wool, then sealing oil.
Your work is outstanding and I long to have such wonderful skills! 👍👍👍
the "group" ... the ending! 😳🤣🤣🤣🤣
Awesome and thanks for the tips
2D carving is relief carving… It’s either shallow or deep relief. No matter what you call it, I love how you carve, Jordy!
Thanks Susan:)
Cool deal
Love it
Great job Jordy. It bought that mirror back to life
Nice job Jordy. That mirror went from plain Jane to quite ornate and beautiful. 👍
Pine does stick to the channels you cut unless you do as you did brushing often😅
Lol
brill
I love the tree swallows. A beautiful piece only Jordy could do. I have a few old mirrors, it’s on my list, thank you❤️
Thank you
Ha ha I’m the same way 😂 just gotta F with it!😂😂😂
Hahaha you know what? It looks fucking awesome 👍
Thank u
Its called hand carved. The tool goes in my hand and i carve. Whatever the tool is, power or not
Agree
Pack it into a little ball it will burn for a long time
DAMNIT Jordy sorry I jinxed you 😜, hopefully it's something easily fixed, something in impeller or bad breaker/switch. Thanks for testing it before I buy one. Thanks Jordy.
Yup u sure jinxed me lol
@@CarvingFusion I hope it's an easy fix.
It’s beautiful!
Thank u
Carbon paper, why can't they have "THIS SIDE UP" !!
⭐️🇨🇦⭐️🇨🇦⭐️🇨🇦⭐️🇨🇦⭐️
Does the collet ever come loose on the dremel?
No not with dremel
I’m ordering the Foredom today but I can’t find the industrial strength one, do you have links, I wanna get the hand piece for the 1/4 burrs down to the small ones, but I’ve saved up for the full set up and accessories so any help you can give I’d super appreciate please, I’ve wanted this for a long time now so don’t want to mess up and get the wrong one, and want it upgraded as much as possible so please help, guide me what to order please and God Bless for your help, I’ve learned a lot watching you
Hi there, if u go to the direct foredom sight, I use the sr series foredom, industrial flex shaft and handpieces,
Just msg the foredom websight and they should help u, just remember though, when u get the industrial flex shaft u need to get the industrial hand pieces to because they are square drive, not key drive like most fordome sets are
So cool! You are inspiring!
Watch you don’t break the mirror 7 years bad luck 😂
;)
🪓🪓🪓🪓
😂 trans... well what ever......😂😂😂
Lol
And just saying I love carving pine, it’s super soft and easy to carve, and depends on when you carve it rather it’s sticky or not but it’s always a mess that’s for sure, I found a red tree I’ve been carving and it’s beautiful when I finish it, much harder than pine but beautiful, I’ve been learning for the last two years, love doing it, good job Jordy