Simple DIY Hoist Ladder Lift with 3 Pulleys for Heavy Cardboard Boxes.
Vložit
- čas přidán 7. 09. 2024
- You make this in less than an hour. Ideal if you need to store heavy boxes on high shelves.
You need:
• 3x Pulleys for cord size 8mm
• 3x jubilee clips (to attach 2 pulleys to the rungs and 1 pulley to the board bracket)
• 15m rope diameter 8mm
• A ~20mm plywood board (to cut 2/3 and 1/3)
• 2x "L-shaped" brackets to hold the bottom plank at 90 degrees angle
• 1x "flat" bracket to screw in the middle top part of the lift to attach one of the pulleys onto it
• Approx 14 wood screws 20mm long
• A bit of washing up liquid to reduce the friction of the plank against the ladder.
Also Cut out 2 wood guides out of your board that you will attach behind the lift board to keep it from sliding out of the ladder - fix them ~5mm wider than the ladder to allow a bit of movement left or right.
#DIY #hoist #ladder #lift
Block and tackle ready for some sailing
Think for food. Y gave me lifting device ideas. Ty
Cool design
OMG...very good
Super
CZcams is very sneaky, they put non-skippable ads on channels that haven't been monetized
Weird, I got no ads.
all videos are prob monetized, its just RNG chance@@j.ballsdeep420
Please tell me, is it possible to load 1 person, can 1 person stand there to go up? Thank you very much!
It is possible. Just make sure the rope is strong enough. Also consider that this pulley system is giving a 2x mechanical advantage. Add more pulleys and more rope to get more advantage.
Cam this carry around 100-150 kg?
Only if the guy on the cord is heavier and has some power
😮
But how you attached it on footstep of ladder
You attach the pulleys with the "jubilee clips" also called "hose clips". The wooden lift part just slides up and down the ladder and is not attached
It looks like a black rubber mat which prevents the ladder to slide at the floor.
Nice but the box is only 14 kg.
How about no DIY shelf, no pulleys, no motor. Just the ladder, some rope and a 150 lb plank to get to the roof. Two people lifting. There's got to be a way.