Mercury 30HP EFI 4 Stroke - Fuel Filter Install - Lowe Skorpion

Sdílet
Vložit
  • čas přidán 25. 04. 2022
  • Installing a new fuel filter in a Mercury 30HP EFI 4 Stroke in my Lowe Skorpion bass boat. The fuel filter is Quicksilver brand.

Komentáře • 9

  • @vtxdaryl
    @vtxdaryl Před rokem

    Good idea about putting the hose on first, so you don’t get them mixed up.

  • @glennbuscher8003
    @glennbuscher8003 Před 11 měsíci

    Thank you.

  • @chopper5076
    @chopper5076 Před rokem +1

    Why would you take the fuel line off? Unless the housing is cracked, just replace the filter by unscrewing the bowl and just replace the filter itself.

  • @mdavis166
    @mdavis166 Před 2 lety

    Very helpful video. What year is the motor? Part number of the fuel filter? I have a Mercury 30 hp 4-S 2010, trying to figure out the correct fuel filter to get. Thanks!

    • @Subariblet
      @Subariblet  Před 2 lety

      My motor is the original motor that came with my 2011 Lowe Skorpion. So the motor has to be either a 2010 or 2011. From what I gathered, the fuel filter is part 879884T. But as you can see in the video, I had to use a little bit larger hose clamps and a different nut on the top of the cartridge. But this filter is the same size and everything I found said that this is the "newest" version of the original filter. It has been working fine and no issues.

  • @stevechoat1163
    @stevechoat1163 Před 11 měsíci

    Does the 30hp have an inline filter as well as the one your replaced?

    • @Subariblet
      @Subariblet  Před 11 měsíci

      I do not believe this has an inline filter. Only the one that I replaced.

  • @johnellenburg2297
    @johnellenburg2297 Před rokem

    Why didn't u put the back clamp on first