Old Rusted Hand Drill - Restoration - WorkshopDC
Vložit
- čas přidán 19. 03. 2022
- #Restoration #WorkshopDC #ASMR #HandDrill
Old Rusted Hand Drill - Restoration - WorkshopDC
Hello how are you?
In today's video I show how I restored a hand drill.
My microphone had a problem so you may notice some parts of the video with very low audio or no audio.
I didn't find any information about this part, but I know it's from the 60's and has 3 speeds.
I started disassembling the piece by the covers, which had only 2 screws holding it.
After that I released all the pins and gears inside the drill body.
I noticed that one of the plastic gears was broken.
With everything dismantled, I washed and brushed all the parts with degreaser and left it in hot water to remove any oil residue.
With all the parts clean I can now remove the rust with water and hydrochloric acid.
For the pins, I did cold oxidation, and put them in the oil for 1 day.
On the iron parts I brushed with steel sponge and polished the main stem.
The plastic handle had some cracks so I glued them with super glue and sanded it on the drill.
The covers were painted yellow, the body and base metallic gray, 2 coats of primer and 2 coats of paint were used on each piece.
I fixed some imperfections on the plastic gears and redid the missing teeth on one of them with super glue.
I also made a wooden handle similar to the plastic one to put on the new crank I bought on the internet.
With everything ready you can assemble the drill and test it for you to see how it works.
I also put in a new chuck since it don't have one.
It works well but it takes a lot of work to make a hole in the wood.
Protection Equipments:
- Gloves;
- Goggles;
- Hearing Protection;
- Mask;
Products Used:
- Degreaser;
- Hidrochloric acid;
- Primer;
- Penetrating Oil;
Equipmentis used:
- BenchGrinder;
- BenchDriil;
- Plier;
- Hammer;
- Screwdriver;
Thanks for watching!
And if you notice some english mistake please tell me in the comments, english is not my main language.
I'm trying my best to make a better content for you, so don't forget to subscribe, comment, share, like and hit the bell notifications, it helps me a lot!
If you want to help the channel with any value, please make a Pix with this key - workshopdcdiy@gmail.com
My Instagram - / workshopdcof
My Facebook - / workshopdcof
![Mesmerizing 1930s Artillery Sprinkler [Restoration]](/img/n.gif)
Hey guys!
I'm sorry for the microphone problem!
Hope you like the video!
With Love - DC!! ❤
Cool project 👍 turned out excellent. I love the yellow.
Thanks Mate! ❤️
Great job buddy 👍, beautiful result 👍
Thanks Mate! ❤
Very nice job man! I want to know who in the world thought that plastic gears in a drill like this was a good idea, I thought they were just covered in yellow grease until you cleaned them up 😆
I thought the same thing hehe'
The gears could be made by Steel.
Thanks for Watching Bro! ❤️
Nice restore mate 💪
Thanks Mate! ❤️
Interesting project and great job buddy👍👍👈
Thanks mate! ❤️
great restoration dear keep it up
Thanks Mate! ❤
Good job mister well done
Thanks Vince! ❤️
Great job mate! 👍🏼
Thanks Mate! Great job on your last video too! ❤️
@@WorkshopDC thank you very much 😄🙏🏼
Excellent.
Thanks! ❤️
Fantastic work mate. I have one of these drills waiting for restoration and have watched dozens of these restoration videos. I have never seen plastic gears before. Obviously yours was built with light duties in mind.
Great job. Looking forward to seeing your next project.
Thank you so much mate! ❤️
Excelente trabajo !!
Muchas gracias! ❤️
It looks great and you did a wonderful job restoring it as well!!!!
Enjoyed your video so I gave it a Thumbs Up as a support
Thanks a lot Oneshot! ❤
@@WorkshopDC You're welcome and keep up the great work!!
Excelente trabalho.
Muito Obrigado! ❤
Gostei da cor, parabéns pela restauração 🤜🤛
Muito obrigado! ❤️
Eu vi o que você fez aqui eim!!!
Usou uma chave de boca pra ser o cabo
Ficou top demais
Parabéns
Muito obrigado! ❤️
With that yellow, you won't lose that tool in the shop...
Thanks for watching Ted! ❤️
Trabalho impecável. Parabéns 👏
Muito obrigado Marcello! ❤️
While you were disassembling, I was thinking, "It just needs a little...Wham...tender...wham...loving...wham...care!"
Thanks for Watching! ❤️
Oh..steel wool is doing a good job. I was wondering why you didn't use sand paper, but that would reduce the diameter and wouldn't fit the gears anymore 👏
That's what I thought! Thanks for Watching! ❤️
@@WorkshopDC I know right 😄 also thank you for replying 👍
Essas furadeiras são muito interessantes; bom que você trocou o mandril, o original é ruim, desmancha fácil.
Muito obrigado! ❤
Essa furadeira era feita no SENAI, fiz uma igual quando cursava Mecânica Geral em 1977 no ultimo ano do curso.
Em Limeira, SP
Legal, não sabia disso. Obrigado por assistir! ❤️
Eu tambem...
Marília, cursei de 1970 a 1972.
Recebemos o corpo e a manivela fundidos, as tampas e o apoio.
O restante nós que fazíamos, embuchanento, eixos, engrenagens e mandril...
@@antonioirineudemoura991 Voce ainda tem a sua?, a minha ainda esta comigo também precisando de uma bela restauração...
@@Edson56245
Não tenho.
Presentei um primo que usou-a bem, mas teve seu carro de trabalho furtado com todas suas ferramentas, furadeira inclusa.😣
What camera did you use to record? This video is beautiful
I use an iPhone. Thanks for Watching Elijah! ❤️
10:55 It's strange that the last gear, which supports the greatest effort, is made of plastic, I don't understand‼️
I asked myself the same thing. Thanks for watching! ❤️
Good afternoon. 1. The mechanism gets stuck... 2. There are a lot of unfinished scratches on the Metal, it was necessary to clean it more thoroughly. There's a hole left on the yellow lid. Shestirenki had to be cleaned and refined so that it would not get stuck. It was possible to lighten them with an ultraviolet lamp and hydrogen peroxide. Generally work on 3-. Fix the bugs and we are waiting for a new video.
Thanks for Watching! ❤️
Lighten up mate. He did a very good job. I’ve never seen a drill like this with plastic gears and why you see the need to whiten them is beyond me.
Maybe show us how it should be done on your channel?
abilitare i sottotitoli? per leggere sentire "sdra" "drum" "brum" "swchhhh" ?
Grazie mille per la visione, il mio microfono ha avuto un problema, quindi l'audio è stato danneggiato.
Мне кажется эту дрель только для ролика и реставрировали. Трудно представить кому может понадобится этот морально устаревший антиквариат.
На самом деле эта часть не будет использоваться для работы, потому что у меня есть электроинструменты. Спасибо за просмотр!