AWESOME 3D Printed Servo Robot Gripper!
Vložit
- čas přidán 25. 08. 2024
- 3D Printed Servo Robot Gripper using MG90S Servo Motor
This is a 3D Printed Servo Gripper made using 3d printed parts and a MG90S Metal Gear Servo Motor. This gripper can pick objects and can be attached on a robotic arm for picking up objects. i have used a servo tester to test the movement of the gripper.
UPDATE: CAD Files Link: cults3d.com/en...
i designed the gripper in fusion 360. i will soon be uploading the files on thingiverse. i have used M3 nuts and bolts. the nuts are 15mm in length and 3mm diameter. i have used standard M3 nuts. but it is preferred to use Nyloc lock nuts as the bolts can unscrew with continuous operation. i powered the servo tester with my DIY portable power supply. i have listed all the parts links below.
Let me know your suggestions and opinion on the build
Parts:
MG90S Servo Motor: bit.ly/3jgcdyV
Servo Tester: bit.ly/3cCDx9f
Solder Iron i Use: bit.ly/2GSArih
Helping Hand Magnifier: bit.ly/2Uh11oe
arduino uno Micro USB: bit.ly/aRdUiNo
also do check out these cool 3d Printers:
Creality Ender 3 pro : bit.ly/36m1POI
Creality CR-10s pro: bit.ly/2QmqU6z
#3DPrinted #Robot
Thank you
Will this design work with a basic SG90 (9g) plastic servo?
I did a similar project and used this, just make sure it isn’t to heavy
I have same robot gripper. But in aluminum.
Will Sg 90 servo suitable for the same 3d model
Hi, can you share with us the Arduino code?
Sir, you can make the Arduino robotic car and give me the circuit diagram and the code for the Arduino robotic arm car?
Do you upload fusion 360 design files in thingserves? It will be great
Ufak bir tavsiye, piyasada onlarca program var ve hepsinin ortak kullanabildiği dosya formatı .step, o yüzden isterken step olarak istemen daha yararlı olur. Çünkü herkes (özellikle tasarlayan kişi) fusion kullanmıyor olabilir :)
@@admniyeokuyorsun...3044 sağolun
added in description. please check. thanks
In my case after a number of movements, the screws and nots start to get loose. How I can fix this? Thanks
You can use nyloc nuts, which have nylon ring inside, which hold the bolts tightly. You're welcome
@@SuperbTech i realise that on your video, I ask to be sure. Thanks!!!
Could you share the 3d files to customize the dimensions?
for the CAD files you can email me on fnfkhan07@gmail.com
Hello, do you have the solidworks file so I may make adjustments?
file link in video description
@@SuperbTech The file did not open at all in Solidworks. any way where you may send the files as "solidworks part doc"?
Do you want to share the STEP files ?
added in description. please check. thanks
:35 :37