THE HERO: A $75 Stainless Steel Propane Forge Kit from Mr. Volcano
Vložit
- čas přidán 8. 09. 2024
- This is a video on the Mr. Volcano Hero, a portable propane forge kit on Amazon for $75.
.
It features a Stainless Steel spot welded construction that comes with an entire self contained kit for creating your own portable propane forge.
.
It uses a standard BBQ style propane tank and features Dual Heat Shield Technology.
.
.
The HERO kit includes:
Complete & thorough Instructions. (Laminated)
A Stainless Steel Enclosure
A Stainless Steel Burner w/ Ball Valve
A 1in thick High Density Ceramic Fiber Blanket
A 16oz Bottle of Rigidizer
2 bags of Satanite Refractory Mortar
A Extreme Heat Magma Firebrick
10ft Stainless Steel Braided Hose w/ Regulator
.
Heats up to 2600°F
Size: 9.5 x 8.75 x 8.75
.
.
.
.
LINKS:
MR. VOLCANO
mrvolcano.com
.
NEW MAKER PRINTS, STICKERS & SHIRTS ON SALE IN THE ADAMCEE SHOP
shop.adamcee.com/
.
ADAM CEE DOT COM
www.adamcee.com/
.
TOUCHMARK BY AUSTIN EDENS
austinedens.com/
.
BIG THANKS TO DEREK MELTON
www.derekmelto...
.
.
.
.
.
.
.
.
.
.
THIS VIDEO IS MEANT FOR DEMONSTRATION PURPOSES ONLY.
.
.
.
.
.
.
.
.
#adamcee #adamceedotcom #adamceetoolco #mrvolcano #mrvolcanohero #propaneforge #heroforge #stainlesssteel #propaneforgekit #propaneforge
I am glad that I purchased mine a few days after you posted your review. Raised to $78, then it sold out the next day. Now it is $88 and sold out. Great review.
Thanks! They should be in stock now!
I bought this last Christmas and it has been sitting a while. Your video is simple and should help this old man get his hobby forge up and going. Thanks for posting.
Wow! Of course! Thanks for the kind comment!
Adam? More like Chad. Thanks bro. Im now Going to be the best corn fed, backyard shed, bucket sitting, foil hat wearing, great grandpa story tellin blacksmith to ever see the 7 seas. All thanks to you.
I recommend using more refractory on the floor, or make a sacrificial floor with more refractory, and ditching the hard brick. The chamber will heat faster, refractory dependent, and more evenly. The benefit of the hard brick is its durability and thermal density. The forge will use less gas once the brick stores all the heat it can handle.
You have completely missed the point of this entire video.
@@AdamCee I don't think so. You did a comprehensive review of the setup an operation of the forge. It looks like a good product and you've given people great information. I just made a recommendation to you and others who are reading the comments.
@@colinotoole3978 no he didn't, and you definitely missed the point of this video.
False
For those looking to buy one of these, I would make sure the kaowool seam lines up at the bottom of the forge as it was at the beginning of this video. This way if you develop any cracks in the satanite at the seam, the outer shell of the forge will still be protected by the fire brick. I ordered one myself, it is being delivered today. Thanks for the video.
FYI, I know this is old but the pre-cut hole for the burner tube doesn't allow for that kaowool configuration. I tried but you'd have a big hole in the wrong spot.
@@Loterbol if you rotate it correctly it will line up just like it was shipped. Just imagine it rotating 180 degrees at the hole instead of simply turning in in the forge to line it up.
Fantastic. Great edit, super clear instructions, and fabulous use of sound. Really loved hearing the rain while applying the refractory. Thanks for this one Adam.
Well thank you! I made a conscious decision to keep music out of it. So I may just keep going with that style! We’ll see! 👁❤️
Your diligent setup of that forge is really going to pay off, well done
Thank you!
You are a life saver, I was thinking I wasn't gonna find a video for this exact forge.
I tried to be the first one! 👁❤️
Keep it up, will definitely be looking into more videos!!!🔥❤
@@RosaMartinez-if8vx Thank you! 👁❤️
Thank you for sharing.....simple and safe!
Appreciated
They seem to be out of stock pretty much everywhere, definitely a great deal once you consider the price I hope more come out soon.
They were up to $88 last week (late October 2021) and on backorder, but order one I did. Plan to enjoy it sometime around Christmas.
A nicely made and edited video, thank you.
Really nice video! Thanks!
This is really great don't stop.
I’ll try my best!!
I watched this video about two months ago, ordered, backorder, the next day, and it arrived today, set everything out, watched the video again, as several have said, you've set it out nicely, step by step, and done a good job of it, and I expect to get mine working over the next few days, taking my time to make it right, for the long haul. Thanks again for a good piece of work, and that's a nice cartouche you've got made, there!
Thank you!
Super helpful! I just got mine and this was great to visualize the process. Thanks.
Awesome! Thanks Phillip!
I think you might have mistaken the 8 oz rigidizer for 16 oz, the bottle contains concentrate and you were supposed to add another 8 oz of water and shake before applying
Thank you
Thank you very much for this video! I am saving up for this forge and a couple of blacksmith tools and will be back to this video as a reference to setup my Mr. Volcano forge. Greetings from the tiny Pacific islands of Palau!
Thank you for the lovely comment!
Loved Palau (koror) and Sansoral, awesome tip, though paid for by the USN.
I did 380 for a 100 dollar lesson and knife, 150 for the 2 burner version of this forge, 60 bucks for a anvil i got off a buddy made from raroad(got lucky there lol) and 38 bucks for tongs cant wait to forge. Its a great hobby
Thanks for this. I just got the 2 burner version. Great video shooting and editing too.
This is nice.
I'ma have one of these sooner than later.
Ya I love the outside shots and you edit was really good Adam. I’m probably gonna buy one of these as soon as I get some projects done. I like that it takes you through the steps off producing a forge and it looks like it heats nicely. Awesome job Adam. 🙏👊🤘👏
Thanks Shawn!! 👁❤️
what I learned from grumpy old men about building an ultra efficient forge: use 2" thick rigidized ceramic wool (very dangerous to handle always use a mask) then 1" high end refractory and finish with a ceramic coating. if you forge a lot it will save you lots of gas costs over time. material will heat up faster, temps will get higher, etc. they say you want 2" of open space around your billet (or whatever you're forging). you don't want too much open air space in the forge.
You have completely missed the point of this video.
@@AdamCee whats the point? to make a shitty, inefficient forge that pumps out ceramic fibers into your lungs? lul
This isn’t a video about how to make the “best” or safest and most efficient forge. This video is to demo this exact forge, and help people assemble this particular inexpensive forge kit with the materials it provides. It’s under $100, of course it won’t be optimal in construction or efficiency, who would expect it to be? But it is functional and a great novice budget option.
It’s good that it comes with refractory. I was hoping it would while watching the video up until that point. I’ve heard that insulation without any is horrible to breathe in when using the forge.
horrible to breathe in regardless if you're using the forge or not
Yeah, it's a nasty carcinogen, whenever handling the stuff, wear some kind of protection for your lungs.
I just received the 2 burner mr volcano. And I'm fueling your instructions. I'm heading the foam glass with a portable heater right now. Then I'm gonna start with the first of the refractory stages after that
Just got one for Yule. Members of my family are terrified now.
8:49 time lapse of the sun moving so wonderfully natural!
I love my mr. volcano forge. Best quality for the money
Indeed, and honestly it’s so cheap you could buy another one after the life has burned out of the previous one!
I have that same anvil. Right down to the broken off Pritchell hole!
I'm making mine right now, hope it turns out just as good!
Vital post. Helped with the assembly.
I, too, got that spray bottle with my order on Amazon and struggled with the last bit of the spray bottle in the refractory too haha
nice!
Mine is coming in a couple days--super helpful video, many thanks!
That 'Day 2' opening shot was stunning!
Well thank you James! ❤️
Great video, super well done on the forge and of course Darth Adam made me laugh! 🔥🔥🔥
Thank you!!! 👁❤️
Great vid, Adam. Looking forward to seeing what you forge next!
Thank you Tom!! 👁❤️
I'm in the process of setting up mine. I'm adding some stainless steel machine screws to supplement the spot welds on the entry tube (hat tip Christ Centered Ironworks.) If you do the same, be aware that the stainless steel enclosure is very hard! I ruined a few 3/16" drill bits getting through it.
Just got dual burner, deburred rough edges and drilled both sides of tack weld on the top of burner mounts. Figured that's where the stress would be. Used stainless, lock washer and nut on outside for periodic tweak. I've some stainless metal screws that I'll supplement base tacks with. Seems good beyond that
Perfect I saw this on Amazon today
I get mine in the mail tomorrow. This was a great watch for what i need to do this weekend
Well thank you! Good luck!
well done
Looks great to get started learning! Thanks for showing the process.
Of course! Thanks for watching Dave!!
if you don't mind I have a few questions.
1: can you melt metals in this, such as aluminum so you could do casting.
2: how much propane did this take, and how long did the piece of metal take to turn red hot. (just an estimate)
3 : If you used this after ward did it last or did it deteriorate after a short time.
if you could answer these questions that would be very helpful thanks.
You would be better off using a crucible instead of a forge for melting. I mean you could do it. But you’ll use so much more gas in a forge.
Definitely not the best type of furnace for casting, you want something with a vertical opening.
I use the same Fisher-Norris anvil! I'm tempted to give that forge a try too...
The anvil I’m using was my great grandfathers. 👁❤️
Great video bit just want to add that the respirator is more needed when handing the insulation that when doing the cement. The fibers are bad to inhale
Thank you for this absolutely useless comment.
great video, thank you for the help :)
Currently Unavailable on Amazon. Any idea when they will be restocked? I'm wanting to get two of them. One for me and a second for a gift.
Woohoo!! Much fun to be had!! Nice one dude!
Thanks Dan!! 👁❤️
Good
"currently unavailable" are scalpers in every market?
Great video. I ordered the Hero Forge because of your video!
Well thanks Robert! 👁❤️
At, 8:40 "Clean it off before it cures"...Before using the Refractory Mix, Apply Painters "Yellow/Blue" Tape on Enclosure, = [any where you don't want MIX on] I get a lot of packages I use the extra address shipping "label stickers" that come with the paper work think, its called TZe label tape.
Excellent, thanks!🔪🔪
Really nice and instructive. Videography and sound is nice. Keep em coming :)
Will do!! 👁❤️❤️❤️
Great video mate, very good to see you out by the anvil again ^^
Well thank you Rasmussen! Need to show the anvil some love now! 👁❤️
I ordered one that was backordered. It came about 3-4 weeks ahead of schedule. I’m not in a hurry to get it done so mine will be mostly air dried. Curious though, why the respirator when applying the satanite? I could understand using it when it’s powder and can be airborne, but once it’s mixed into a slurry I don’t see where it would be harmful.
Pre-existing conditions. Safety first.
Fantastic!! As always broski!!! Showed me I need to slow down when applying my cement. It came out great!! And your touch mark is awesome!!!
Thanks Andy!! I tried my best!
@@AdamCee you did a fantastic show and tell!!!😃
Remember to test the fittings with soapy water before using. Some reviews on this model claim that the fittings aren’t great. Also, Update: This model is currently $209 on Amazon Canada. Big jump from $75 US. But still not bad for a half decent backyard blade smith setup.
Did your rigidizer come already mixed with water? Mine said to add water with 1:1 ratio and then shake for 45 seconds
I read the same thing in the manual and noticed he didn't dilute it.
I stumbled on your video bc I just got the double burner one and I must say it is a perfect instructive video man. And forging a little with it at the end made it even better. Great job. 👍
Do you like yours? Money well spent?
HILARIOUS!!!🤣
Could you please review the hero 2 please
..Thanks for this video. i was so impressed with it and the forge i ordered one. Also subscribed to your channel...
Well thanks!! 👁❤️
Wow that's nearly a week of work before you can even use it
I have to ask why you never put the airflow control sleeve (Choke) on. I have looked at this on Amazon and it mentions the airflow control, you even briefly showed it in the video.
I completely lost it. I just use my hand in all honesty if I need to choke it.
Was I supposed to trim the blanket? Mine was way longer than that
Great "set-up" video. Actually pointed out some tips that other "set-up" videos usually gloss over. What about a performance review of the forge itself, now that it has been a bit since you've set it up and used it? How does it compare to other forges? Pros? Cons?
Thanks Tracey, we'll see. Haven't been feeling it lately.
@@AdamCee well, I was thinking about getting this little Forge to be able to take around two demonstrations and such due to its portability period I was just curious as to how well it performed period have you used it much to offer a comparison to other porches as far as performance? Do you think it works well for smaller stuff?
John at Old Hickory Forge has this same propane forge. I recommend you check his video out as well.
Ok so why spray down with water and the red stuff. I'm not a blacksmith but a woodworker and this would help me in my shop
how fast will it use propane
Great video. I have been procrastinating about getting a beginner forge. This looks like it will do. Sub #357, liked.
Amazon site says currently unavailable.
Why spray water? I get the rest but why coat in water. Does it not dilute and displace the rigidizer?
yeah i noticed that too, i think your meant to spray water on the wool before you apply the refractory, not before you apply the rigidizer.
It's in the instructions. Plus he should have diluted it if he didn't:
"2. Mix the Rigidizer concentrate with water using a 1 to 1 ratio, shake vigorously for 45 seconds before using.
3. Spray water lightly on all sides of the blanket. This is done to prepare the blanket for the process of applying the rigidizer."
What do you think about insulating the outside with another thermal blanket?
Great video! I am a bit concerned by the position of your thumb when you are hammering. Please, let the hammer bounce back by positioning your thumb on the side of the hammer. Your articulation will thank you in a few years. To be honest, I saw you doing it only in the first pass of hammering.
Hey man, can we get an updated review? I’d like to know how it’s held up!
Hey Adam it’s Sparky. Really cool vid!!
Hope to see more forging soon to come..!!💪🏼🔥🔥🔥👍🏻
Thanks Sparky!!!
Great info!
Not to hijack the comments, but I do have a question for Adam or those of you who have this forge or one like it. I want to have my forge on a mobile base, it will be outside. I was thinking either a Harbor Freight tool cart or just get an old gas grill and modify as needed. What are you using?
i picked up a small metal table from Home Depot.
@@AdamCee Yeah, I've been looking at tables as well. I think I'm going to go the grill route just to get things up and running and then evaluate as i go. Thanks for the quick reply.
So is it best to run these things wide open throttle? Mine is built and I've begun the heat cycling of the satanite. Just curious if when it comes time to forge or quench a knife blade if this thing operates with the regulator wide open?
Now we need a best anvil for same price point
There are relatively cheap and affordable anvils at Harbor Frieght if you need something ASAP. But honestly a big flat piece of metal will work fine until you find a better anvil! But yes! An affordable 50-150 pound anvil would be fantastic.
This is a cool little single burner forge, I've been looking to get into forging. Other then obviously the forge and a anvil, what other tools/types of hammers are good to get for starting off doing basic blades.
Thanks! I don’t really make blades but I highly recommend products from:
www.walbergforged.com/
Great guy. Super knowledgeable and a quick turnaround. I use his rounding hammer and I recommend them for beginners. 👍🏼
look into hardy tools for your anvil along with tongs,various pliers. grab a ball peen hammer and a cross peen hammer for starting out. If you have an outdoor area to work you could make a box of dirt forge with coal or charcoal
All of what @@ludwigguy380 said. You'll save yourself a lot of money by learning to make your own tongs though. I also took a regular 2.5 lb sledge and rounded one side and flattened the other.
What is ppe
Couple of questions. I forgot to moisten before satanite is this a problem? and it never seemed to become completely rigid.. rigid.. after the rigidizer. i know it is too late now but what should i have done differently for next time.
I enjoyed you video, but commentary would be nice.
I bought 4 of these about 3 months ago. Just this last week I had 2 of the regulators fail. About 60-80hrs on each.
Still worth it in my opinion, but also good to buy and extra regulator as that seems to be the weakest point.
Just so you know as of September 2023 or before, the quality of the propane regulator and hose has gone from braided stainless hose with flare fittings to a cheap rubber hose with barb fittings and hose clamps with cheap plastic screw tabs. Going to test with soapy water EVERY time before using it.
Does it get hot enough for my rotisserie chicken?
How long did it take to get that metal glowing red???
How do you get ahold of one of these I've been trying for awhile now but it's been not available since I found out about it
Good video. How long do those propane tanks last using this forge?
All that work and lots of days.....and you could have used refactory bricks and had a fully functional forge in 1 hour or less
At the price this forge was selling for when this video came out it would have been hard to buy anything other than a decent burner for the same price, you might have been able to buy 4 or 5 decent firebricks if you didn't want a burner. If you don't limit yourself to gas forges a peice of pipe and a hole in the ground can be used to get steel fairly hot..
I just started using this forge. What psi is your regulator set to?
question, what is the little thing with the yellow lever handle on top called? my forge did not come with one, is it something you need to buy separately? I can't get my forge to start and I'm assuming that it needs that :( any recommendations you have would be greatly appreciated
Take the whole thing into Home Depot or lowes and go to the gas fittings in the plumbing section and find a cut out valve that fits
How do you fix the cracks on the cement do i take everything out and get new refractory cement and ceramic wool?
Nah. Just get some of the refractory mix and fill them in. Cracks are gonna happen. Just keep filling until it starts crumbling. And then it’s time to replace.
Great video, perfect timing, just received mine, thanks for the effort
Thanks Todd! Let me know if you need help! 👁❤️
Man I found this video too late and it's no longer in stick T_T I hope they restock it
Instructions (paraphrased): _Wipe refractory paste off outside of forge._
Leaves it unwiped.
Smh.
A dozen fire bricks and you don't have to mess with all that crap just stack the bricks leaving an open end and some place to put your torch and you are in business
Saaweet!!! Pretty nifty little forge! Have you check it out!! I could use that thing!! Thx
Forge doesn't look so good to me, too easy to damage. Looks too shallow for the width. The first forge I ever built was way better, more solid, and usable. Cost me about $10 for perlite and plaster of paris. It's built like a coffee can forge., but over 2x larger.
Hey great video! I just started setting mine up today and I cant get it to stay lit for more than a few seconds, any suggestions?
Actually just figured it out! Had to have the regulator valve all the way open (red) and then slowly crack it from the ball valve. Hope that helps someone else!
Please refer to the included instructions for more information. 👁❤️
@@tylerharrington6899 Nice! Glad you figure it out. Don’t be scared to open the valve all the way. As long as you’re in a well ventilated area, propane is relatively safe. So CRANK IT. 🔥🔥🔥🔥
When curing the ridgidizer does the entire thing need to be white or just till the steam stops?
What did the video and the instructions say….?
@@AdamCee till its dry and ridgid?
@@AdamCee ok i got it thanks👍