Why is mine not stable? It works for sometimes and the secondary will be displaying no communication from the primary decoder. But the primary is working steadily . What could be the issue?
Hi. I'm usin explora 1 as primary decoder and hd 4U as secondary xtraview using old smart lnb with 4 unicable slots and 2 universal slots.... But then again there is another dish but with a universal lnb.. I took the cable from the universal lnb in the other dish... and I inserted the cable in the extra view hd 4U decoder and the primary decoder explora 1 is alone in the other dish with a old smart lnb I used a diplexier on the secondary HD 4U decoder.. How is that possible?
You can chat me on
+233554445166
It's works you're the best
Your welcome
Educating.
Good
PLEASE SUBSCRIBE TO MY CHANNEL
Great 👌
Thanks ✌️
How about extra view settings for dstv hd decorder(new small one without RF out) to old zappa(non HD with RF out and in)
It's the same settings with the zapper to zapper setup
But make sure the old zapper is your primary decoder
Good stuff
Glad you enjoyed
Very nice 👍
Thank you 👍
nice one
Thanks
Am using a universal LNB and not smart LNB nor combiner can I use the settings in the video
No please
The settings is for SMART LNB
Where in the settings do you make this changes?
If you are finding it difficult,
Do factory reset and follow STEP ONE TO FIVE
What is a Zappa band
Do you mean USER BAND??
Nice one
Thanks for watching
There’s non for HD decoder ?
Hd is the same as Zapper to zapper
Please I help... I have been having this issue on and off for 2months now
Follow the SET BY STEP settings for your decoder in this video
Why is mine not stable? It works for sometimes and the secondary will be displaying no communication from the primary decoder. But the primary is working steadily . What could be the issue?
Are you using SMART LNB or DIPLEXER(COMBINER) for the set-up?
Smart LNB
Also having the same problem
@@khondwanimhango6137
Which model of decoder are you using?
Do you have a good signal?
You can chart me up
+233 554 445 166
Hi. I'm usin explora 1 as primary decoder and hd 4U as secondary xtraview using old smart lnb with 4 unicable slots and 2 universal slots....
But then again there is another dish but with a universal lnb.. I took the cable from the universal lnb in the other dish... and I inserted the cable in the extra view hd 4U decoder and
the primary decoder explora 1 is alone in the other dish with a old smart lnb
I used a diplexier on the secondary HD 4U decoder..
How is that possible?
Does distance matter in extraview
YES
Expecially when you are using DIPLEXER (COMBINER).
The COMBINER MUST be close to the dish
I need more information on this
You can chat me up
WhatsApp +233554445166
Please this is not for a non-technician
Sure ❤
Hello,how do we clear error 143
That's what the video is all about
And if you had do the method that you suggested and still nothing
Please chart me
+2335554445166
@@patricklorlor317what can I do cos I connected two combiners but still no comms from primary decoder
@@MarvinviljoenLet the COMBINER be closer to the dish
The combiner is less then arm length from dish but stil nothing
@@Marvinviljoen
Please chart me up on Whatsapp +233 554 445 166
There’s non for HD decoder ?
HD decoders are the same as Zapper decoder