Video není dostupné.
Omlouváme se.
93-02 Fbody RSM Tubular Front Kit Install Guide
Vložit
- čas přidán 27. 05. 2023
- Links:
RSM Products at: rock-solid-motorsports.com
/ rock-solid-m. .
/ rocksolidmo. .
/ duhastttls
www.facebook. com/OmgBoost-1111428782320378
/ black-sabbath-ws6-1004...
/ @rsmpropertymanagement
If I have learned anything since 76' building cars... it is certainly to be adaptable in your problem solving and application(s) and final rendition. I have to give a big " attaboy " to you... for being above par and thorough.
KUDO'S to you my friend for all that you share and show... thank you! My wife finally gave the okay for me to build her 93' Z28 as I am super stoked!
Respectfully, Seth
Will be in touch. ( N.E.Oklahoma)
Good stuff. Your F-Body parts are top notch.
Yes, just got all of my Midwest Chassis stage 5 kit.
My Nephew Joshua just bought me that kit for my birthday. thank you from Kerrville Texas!
have you already installed it? I just ordered one and I'm right down the hwy in Fair Oaks Ranch, Texas
@@JesseSeg84 just make sure you level up your car and you tig weld it 👍
@@martygrajeda3457 i have a tig welder but I'm just not good with tig yet, so I was planning on just mig welding it up.
@@JesseSeg84 what year is your car?
it's like you read my mind. I'll be ordering one for my trans am soon.
This is what I’ve been waiting for. I already cut my frame, but still trying to save up for the kit. I should’ve done it the other way around. 😂
Steve my kit came in on Monday. Saving up for the 8.50 cage 👍
nice one!keep em commin dude. du hast is lightyears better than any other racecar built in my humble opinion,slick rick is badass+id give it a solid 8 but du hast is a9.5 out of 10,i would say 10 but nothing is perfect. i hope it performs even just close too how good it looks and your going too break some hearts outhere on the racetrack!!! it allmost looks too good too risk racing it down the track,i honestly dont know the lastime i saw a car or anything so beautifull as your car. i hate too say this but it should probably be in petersons motor museum cos its a work of art!!!
Should check out my sleeper im in the process of buildiing
Need one for 68-72 A-body, got any of those?
What if I have already gutted the hood. Like literally took everything off the hood except the skin???? I got no hood hinges or shocks supports. I was going to weight reduction and hood pins.....
Awesome video 👍
Thanks!
Would you guys be able to install this on my 02 trans am after Thanksgiving if i order the kit?
Awesome vid! What’s the length of the square tubing jig for the headlight brackets?
29.25
What is the total cost for same install parts and labor , to have you do it, start to finish, it if I bring it to you?
Just the basic cut and install tubing from kit is 1k labor plus front kit cost. If we install radiator, intercooler, hood latch, wire, paint, etc it's around 2k labor
Info on that jackup cart in the video!! Thats a great item to have in the shop!!!👍👍
Just a $150 transmission jack. Marketplace find lol
Did you guys add any thing to it??
I need to put mine on. The front end is already cut off with no measurements of where the headlights were. Is that a huge deal or can you carefully put them back in the right spot after the bumper and fenders are back on the car
If you use the measurements I've given this video it should put you very very close
😎👍👍
Do I cut before or in the middle of the sway bar brackets? Following the car down the bend line.
F-body cuts behind sway bar
What fans were they running ?
Why don’t you have one cameraman filming a couple of guys from beginning to end installing one on Camaro and then do it all over again on the Firebird one camera guy two technicians doing the install of the front end?
The process would be identical. We are a small crew that's why I most of the time tripod the GoPro and film myself. Otherwise there would be no videos.
Out of curiosity do you know the weight difference between the tube kit and the factory front end on 93 maro?
If everything is OEM on the car and you switch over to the tube front kit you can save around 50 to 55 lb
Can I buy a fixture? I have 2 Camaros that I'm putting your kit on. Both my cars.
Just email us
Will do, just tacked my tub front-end
Working on lights next week end 👍
Anyone interested in a 94 Camaro that needs this kit installed ?
I started the project but lost interest in racing and want to sell the car.
You guys sold OMG Boost??!!!😥😥😥😥
Also ur talking about welding it all in..... I see you're tig welding everything I think. I'm not a professional. Just a diy guy .. I only have a mig welder.... Another thing . I have a stock LT1 k member with hooker blackhearts LS swap frome to motor mounts so everything is supposed in OEM height and location and spec other than having to cut the driver's floor for my headers. ... So being broke I had no choice but to git the hood for clearance bc I went carbured 5.3 . Wayyyy too high after the carb and etc.
Id like to know the same can it be migged
Spray sone hair Spray on your chalk line is will stay.