Juiced Bikes RipRacer Assembly and Set-Up
Vložit
- čas přidán 31. 05. 2024
- Visit www.juicedbikes.com/products/... for more information on the RipRacer e-bike. This video features complete instructions for assembling and setting up the RipRacer e-bike from Juiced Bikes. Including:
0:23 Unboxing
2:11 Front wheel install
4:54 Handlebar install
6:43 Headlight install
7:48 Bell & Reflector install
9:11 Pedal install
10:36 Last steps before riding
11:18 Turning on bike
Always review your state & local laws before allowing a minor to ride an e-bike. In many states, including California, riders must be 16 and older to operate a Class 3 e-bike.
_________________
FOLLOW US:
Website:
www.juicedbikes.com/
Instagram:
/ juicedbikes
Facebook:
/ juicedbikes
#Ebike #JuicedBikes #ElectricBike - Auta a dopravní prostředky
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Got both of mine yesterday just had the first ride on a class 3. Only put on class 2 setting so far and damn this thing is crazy! I live in Anaheim Hills just took it up and down hills and I am 240#. So fun. About to put number two together. First is the blue which is amazing now to the green. Assembly without watching this video I just discovered it but it was not bad at all. Used the tools provided. You all are going to be stoked!!!
but on the website shipping will be on june? you live in anaheim los Angeles,California jonathan?
@@AviationDrone_75 Yes Anaheim, CA.
How’s the comfortability with no suspension?
@@jonathanfrench5323 how was the ride without suspension and the power jothanan? thank you for your reply,appreciate it..planning to get one if it runs faster than 28
@@AviationDrone_75 I haver trail trail riding but on a rough street and speed bumps better than expected. I have the RipCurrent S class 3 and the Rip Racer hard to explain it does fine.
The power put it this way I spent the day testing them up and down hills near my house in the hills in class 2 mode. It got my big bootie 240# up them all with more effort of course.
I find I am using the power control button as my gear shifter when hills come. On flat eco moves out. Again class 2 setting.
You say why have you not cranked it up? Being a smaller bike and a bigger guy I am still gaining confidence in it before I wisk away at 28MPH+. 20 to 22 seems a lot faster at this point than my RipCurrent S which makes sense. First day, I know I will gain confidence and let her rip soon.
These babies are a blast. Solid and simple. Fun fun fun!
Friday at 6pm was probably not good day to assemble my new Rip Racer Class 3 eBike but I was too stoked to get it. When I started assembly the bike, everything was good well until I mounted my handle bar. When I moved all the cables to the front of the bar, the front brake cable was extremely tight. One wrong turn, it was going to snap off. Work around: First remove the "curly" straps the wraps the cables. Disconnect the wire from the front brake to the controller, disconnect the brake lever from the bike, then run through the frame. Now there was plenty of slack and did not imped turning. Then performed some wire cable management to look pretty. At this point, the rest was down hill. Over all, it took over an hour to assemble the bike. Thank you for making this video. Read my review on the RR Speed Test video. LOVE MY EBIKE!!!
I had the cable issue as well, + my left brake clamp broke while securing, now I have to wait for a replacement part, damn torture to wait!
@@petermartella26 Bummer dude. I loved the RipRacer so much, I bought the Class 2 version for my son. The assembly was much easier this time around
Just bought mine in yellow, can’t wait for it to get here!
Mine came with the wrong screw driver and is missing a tire bolt 🥲
I always just realized I was sent the wrong color as well 🥲I ordered yellow and got blue.
I can’t wait to get mine !
Set mine up yesterday. Thanks 😊
So stoked for it.
Hell yeah, my new commuter is looking good!.
how have you liked it after a year?
You can assemble without a helper: Install handlebars first. Place bike upside down resting on handlebars and seat(make sure display is rotated out of the way, and use the foam packaging to cushion the bars and seat) Remove caliper to make installing the front wheel easier. Install wheel, then caliper. ( before tightening caliper bolts, engage front brake to center the caliper, then tighten bolts.) Flip bike over and continue assembly. Enjoy the ride !
Hey Juiced, what brake pads are direct replacement for this bike? The owners manual doesn’t have an illustration description for Logan hydraulic brakes. Only Tektra. Any help?
Hey 👋 You can use the organic brake pads listed on our site
My FRONT tire is rubbing on my new Juiced RipRacer. Almost like the brake is slightly on. The wheel does not spin. Do I just need to ride to break it in? Calliper does not seam to be centered on rotor and getting worse.
Hey 👋 For an issues with your e-bike contact support@juicedbikes.com or give us a call, that way an e-bike expect can troubleshoot the issue for you and give an exact recommendation.
I’m having trouble sliding the battery to turn it on is there a tip to help?
Hey 👋 Make sure that the lower part of the battery is properly seated and sometimes it helps to lift a little as you push the battery into place.
Do you have a gear kit for the bike? Add chain rings?
Hey 👋 Thank you for reaching out! We don't currently offer a gear kit for this model.
does any of these bikes small enough for a person who is short
Hey 👋 Check out the RipRacer or the HyperScorpion models.
😎
Can the front forks be replaced?
Hey 👋 Thank you for reaching out! we have not tested the RipRacer with any after market fork options.
How long does the initial charge take generally?
Hey 👋 this varies on where the battery is at upon arrival, they usually arrive about 50%. A full charge from empty would be about 5-7 hrs depending on the battery you have.
Where does the AirTag go?
There is a special compartment located on top of the battery where an Apple AirTag device can be hidden.
The screen only turns on when charging
Hey 👋 Sounds like your battery may be in sleep mode or having a connection issue. Contact support@juicedbikes.com for assistance
My peddles will not screw in
Hey 👋 If you're having trouble assembling your ride contact support@juicedbikes.com
Bicycle BIcyle BICYCLE
wish you didn’t have to unlock and partially remove the battery just to turn it on and off :/
Hey 👋 Thank you for your feedback! The battery will go to sleep after a few minutes of being inactive. The lockable button benefits the rider when it comes to water resistance and security. For more information contact support@juicedbikes.com
@@juicedbikes so, to be clear, I don't have turn it off?
Hey, 👋 Yes, the battery will go to sleep if not in use.
@@khrisstake2210 You don’t have to turn it off. But you do have to turn it on by partially removing the battery every time you want to use the bike And that is the annoying part. The battery and locking mechanism are really fiddily
@@lagunajill if it's only asleep, you should be about to turn it on with the lcd display. Shouldn't you?
I’m having trouble sliding the battery to turn it on is there a tip to help?
Hey 👋 Make sure that the lower part of the battery is properly seated and sometimes it helps to lift a little as you push the battery into place.