Cory, that is what insurance is for... You are human at the end of the day, and we all make mistakes... I can't imagine Jordan being angry at an accident. As you rightly say, at least no one was hurt, and that it was only a lampost. Great entertaining video again, for this non electrician Best regards Lee (In Denmark)
Replacing those van doors gets expensive fast. I had a hire van that ended up being towed backwards by a tractor, and had a smash with the tow tractor when it was forced to make an emergency stop by an errant pickup. The van slid on slick mud, and we took the tractor's towgear right into the middle of the back doors. They closed, they latched, we made it home but the hire company charged me for the repair (correctly, it was in my care when the accident happened) - it ended up coming to over a grand with parts and labour. Hopefully you can get it panel beaten, and save the cost of new parts, at least.
Don't feel bad about the van Cory it could be worse. Back when I was still an apprentice I gave the sparks I was working with a lift pick up the new company van. He didn't even make it out of the dealership with it. He misjudged the size of it and caught the gate out onto the forecourt. Smashed the passenger window and dented the whole door. Van immediately went back in for a new door.
Nicely off topic but Re: the injury, I used to live in Sweden and went to visit a stately house, Tjolöholms Slott. It was built by a Scottish businessman who bought pit prop timber and sold it in the UK. He lived in Sweden too. The place was finished and he was mowing the lawns, he had a bottle of pop, which in Sweden, even when I was there, had a metal cap that was removed by pulling a tag similar to wine bottles. He cut himself opening the bottle and wrapped the soft metal round the cut to stop the bleeding. Died three days later, blood poisoning. Which is too close to home as my grandad did a similar thing when I was five. At least you washed the cut . I have done the same many times but it is worth treating properly, even if it does come over as rather wussy. A very neat installation in the end, commiserations on the van incident.
Only half a job :) You didn't show us the damage to the lamppost though. PS, its not a dent, its a battle scar lol. Nice panel beating btw. Claim it on the insurance, or use the Artisan profit from 2021 to get a new door. I don't think Jordan would grudge paying for his top sparky
As I have said previously I am not an electrician or even training to be but I find these videos obviously very informative but just, relaxing. The way they’re shot and the way they run is just brilliant. Keep up the amazing work Artisan. Definitely my favourite channel on CZcams. Also Cory, head up, as you said it’s just a van and these things happen.
I have that electric screwdriver from wiha for a couple of years but it isn’t strong enough, I don’t like it. I recommend a other brand but haven’t tested any other yet.
Another great video from the guys. Cory and Ruben work extremely well together and Cory's a great role model for Ruben, both professionally and personally. Sh*tty buzz with the rear of the van however, you said it yourself, it's only an object and money can fix it 👍 Well done again guys - mighty stuff.
Cory it happens. Like you said it could have been worse. Keep the videos coming. I do not think Jorden will let you pay for it. Its part of doing business and it is insured.
Its all good, i reversed a new 19 plate Parcelforce sprinter into a lampost on a Persimmon site a few years ago. These modern vans crumple so easily. Gone are the days of tank like vans.
Brilliant video Cory.😊 Shame for the van but don't worry about it. Jordan is a good fella, I don't think he'll get mad at you for having an accident.🤔 You can try to get it repaired rather than a new door. Best of luck.😉
Cory....Go for the Bosch Go electric screwdriver instead of the Wiha SpeedE. They are a great bit of kit and over half the price. I got one for that exact reason, saves those wrists and elbows during EICR's and just really speeds things up👍🏻
I really hate that feeling when you have a minor accident you cant stop thinking about "if only, if only etc" Like one of the comments said below this is why we have insurance!!! Love your video's and I have to say your Consumer Units are a work of art!!! keep up the good work! PS I am also looking to get one of the Whia electric screwdrivers, I will let you know what I think of them.
Years ago while learning to drive a Datsun Sunny, always in the dark, on quiet roads for some reason, i was doing a 3 point turn and decided to do it under the only working street light on the road, heavy rain and darkness didnt help, so steer to middle of road and then to opposite kerb and engage reverse , and reverse, single street light giving a good view of rear, so i stopped clear of the kerb line, instructor said you can go back a bit more, but try not to hit kerb, so slowly crept back about a few more feet and BANG, THEN BANG again as i had reversed into the lamppost stuck on edge of kerb, as opposed to being on fence line for some reason , then second Bang as shade from the yellow sodium lamp fell onto roof of car, we both got out as neighbours started appearing, and i was told to drive off quite quickly . Never heard anymore about the incident, despite car having a dent in roof, broken lamp post a huge, L on a triangle stuck on roof as well as signs on side of learner car.
Good to see you back Cory. Sorry about your trouble with the van . Sometimes stuff like that happen. Its there is keep us humble and to prioritise what's important like Reuban's index finger. He'll need that later. So I'm glad that was saved. I'm still smiling at the numbers of times Jordan had to let off the handbrake in the new electric VW. Now there is an exercise in humility !! Happy New Year!!.
Top Tip: if you cut you finger put your hand above your head, this lowers the blood pressure in your arm & allows the cut to clot quicker. PDR will be able to remove the dent in the door & that will save a fortune in labour, paint & a replacement door. Trying to remove the dent yourself will have made PDR harder so next time as temping as it is don't try to remove the dent. The bumper cover will need replacing though.
Lamppost, what Lamppost. There it was providing comfort to passers-by in the evening little knowing that Cory ... Did you administer EICR or is the electrical tape only for Ruben.
Ouch your van got hit. That's okay.. I can't imagine Jordan laughing, not angry at an accident. Cory will pay for it to be fixed. But Great team work! Thumbs up! Cheers! 🤟
A little tip. Kitchen cupboard doors have a quick release catch on the back of the hinges to remove them easily without changing the adjustment on the hinge itself.
The Wiha Speed-e (first gen) is good but really expensive and only reaches 0.4Nm before cutting out. The speed-e 2 is adjustable from 0.4-1Nm but even more expensive than the 1st!! I have found an alternative, still made by Wiha but in their Zu Hause (at home) range. It has the same Nm adjustment as the speed-e 2 but at a fraction of the price. I’ve used it now for a few months and it’s been brilliant. Only difference that I can see is that the rechargeable battery can’t be changed.
Now I am an apprentice still, in my last couple of weeks. Infact I have my last exam in 2 weeks. I have the Wiha Speede II, I must tell you. It is wrist saving for doing a lot of sockets, switches, breakers, etc. Work that requires lots of screwing by hand
Cory, I have the Wiha Speede 2. I use it alot for switches and outlets batteries do seem to die fast. It takes same bits as the wiha torque screwdriver
It's a work tool, it's not meant to be shiny. If it's still shiny you haven't used it enough. No point fixing it, it will pick up more battle scars in time.
I have a Wiha Speede. I find it still needs some work. There is alot of "slop" when using it as a standard screw driver. Spent have alot of torque but I guess to be expected for such a small motor. Will prevent RSI but also will frustrate you.
Say you've got a ring which you need to extend 20cm, can you create a lollipop circuit? Bit of 4mm2 out of the board up to the trunking, a three way MF lever connector (so you can disconnect for testing) and run the ring from that. I can't immediately think of a reason why it wouldn't be safe. I think the biggest issue would be testing it but it's accessible and you can stick a label somewhere. You're allowed to parallel conductors, you're not creating a split ring or a cross connected ring or anything. Might save a few extensions? Maybe it's just a bit too confusing and not worth the hassle. It would be fine (normal even) to run a 10mm2 cable out to a garage, put in an DB with a 32A MCB and run a ring final from that. If you were to just move the 32A MCB to the start of the 10mm2 cable it would appear to achieve the same effect. Could be useful if you've got a redundant cooker feed in a kitchen too, otherwise you'd just turn it in to a radial on 4mm2. Maybe there's already a name for this that I don't know about!
When you need to "work through" your injuries, try alum to stop the bleeding, then super glue for wound closure. You can cover the glue with a small bit of tyvek if it's in an area that gets stretched a lot... Also keep some *instant cold packs* handy for when you bash yourselves... Getting cold on a contusion *fast* will reduce bruising and speed healing.
Great board change, looks really neat. Van, that will Tcut out 🤘🏻👍🏻 Only feedback is maybe remove the customers washing up bowl before rinsing finger blood into it next time 😂🤪
It's interesting coming from North American electrical to see the differences in the UK... Junctions are handled so differently here... Has to be in a junction box, and can't be concealed at all.
Shit happens mate ,the insurance will cover it ,Jordan is lucky to have such a good worker who cares about his job!!they are hard to find trust me ,i run my own business and i know this too well
Hey cory, why don't you make a video talking about your ferfamenta? And by the way, do you like this model of cutting pliers from ck so much so you don't switch to one from knipex?
soldered connection and heat shrink? You are quite lucky, such a job would not qualify for a professional job over here. Why not use wago connectors? Also, that cable connector on the kitchen floor under the cabinet... I really hope it never get wet. Nice videos, and i am sure you know what you are doing. Just never thought that stardards can be so different in different countries.
Not the best Start to January for you guy , With what happened with the Nightmare new Electric van and Reuben cuts his finger + Cory hit post with the van. (That’s really sucks for you Cory ), I m Sure Jordan will be ok in a van things happen, great to see you guys back on CZcams and doing a great job As always ⚡️👊
Top video and as requested I have just started following you on instagram and love your music especially your own track a man of with many talents oh better not praise you otherwise we will never hear the last of it on hear 😂😂only kidding you sound really good I sing a pop choir just wish I had your confidence to performance or sing solo always feel safe in a choir my brother in law is like you he plays guitar and sings and is trying hard to get me and him to do an open mic together 🙄😎
Cory Accidents happen.. You should not be paying for it, I would hope Jordan would understand its just part of business costs (Obviously dont keep doing it).. Its annoying I know but you do a great job and any employer should look after you, its one of the big advantages of being employed rather than self employed.. Your not the type that has been reckless.. Any employer that would accept you paying for that accident your too good to be working for... I am sure Jordan will do the right thing.. I crashed my company car in a morrisons car park age 21, had to sheepishly phone my boss to tell him, thankfully he was alright about it, luckily a load of other guys had accidents.. I did about £4.5k worth of damage, although ironically the repair shop took over 3 months to repair and when I got it checked out at a main dealer turns out they had done £6.5k worth of damage by trying to fix it...
Don’t worry I didn’t reverse into a lamp post I drove into one head on in a week old electric van, my foot slipped! It happens but I wasn’t as good as you and I didn’t offer to pay to fix it 😂
VIDEO SPONSOR - Tradify 📱
Get 50% Off your first 3 months with Tradify using our discount code "ARTISAN" here: bit.ly/32TwXbz
1 LIKE EQUALS 1 NIK NAK FOR MAX (The Cameraman)
@@artisanelectrics nearly a bag there haha
Haha absolutely pissed myself at the "it's a nice father/son moment" comment by Reuben 🤣🤣👍👍👋
Classic
Best Reuben comment - “lick your fingers and touch the brown wire”….he’s passed his apprenticeship if he knows that old school trick.
Not the sack, but lumbered with the new electric van over winter will do.
Can't damage it if you can't get off the driveway🤠
😭 a real punishment
Anything but that!
@@corynoahmac Stuff happens. No one was hurt apart from the boss's feelings.
“You have been a naughty employee i will punish you with 62 miles range”
Cory needs to get his ice scraper ready for the Electric VW 🤣
Cory if the paints not damaged get the Dent Devil in and they will be able to pull that out without having to get a new door, save a fortune
Cory, that is what insurance is for...
You are human at the end of the day, and we all make mistakes... I can't imagine Jordan being angry at an accident. As you rightly say, at least no one was hurt, and that it was only a lampost.
Great entertaining video again, for this non electrician
Best regards
Lee
(In Denmark)
Thanks!
Nah, you don’t claim on insurance for that with a van. It’s a van - if it hasn’t got any damage, it’s not being used right…
Cory: "I'll pay for it"
How much are you willing to pay to not be given the e-VW? AKA the Artisan Punishment Van!
I dunno, get paid for spending half the day waiting at a charge point for the van to charge...
'Artisan Punishment Van' 😂😂😂
@@artisanelectrics You know if he crashes that one and rights it off we will all think its an insurance scam to get rid of it lol..
Another quality father and son moment
Rueben is 16-17 and Corey is 23-24..... How old was the mother???
😂😂😂
@@tcpnetworks Betty Crocker never reveals her age
@@dg2908 The foxy minx...
I've noticed how mint your van is in previous videos... Now it finally looks like a work vehicle!
Man! Cory can sing!
Replacing those van doors gets expensive fast. I had a hire van that ended up being towed backwards by a tractor, and had a smash with the tow tractor when it was forced to make an emergency stop by an errant pickup. The van slid on slick mud, and we took the tractor's towgear right into the middle of the back doors. They closed, they latched, we made it home but the hire company charged me for the repair (correctly, it was in my care when the accident happened) - it ended up coming to over a grand with parts and labour. Hopefully you can get it panel beaten, and save the cost of new parts, at least.
Don't feel bad about the van Cory it could be worse. Back when I was still an apprentice I gave the sparks I was working with a lift pick up the new company van. He didn't even make it out of the dealership with it. He misjudged the size of it and caught the gate out onto the forecourt. Smashed the passenger window and dented the whole door. Van immediately went back in for a new door.
Nicely off topic but Re: the injury, I used to live in Sweden and went to visit a stately house, Tjolöholms Slott.
It was built by a Scottish businessman who bought pit prop timber and sold it in the UK. He lived in Sweden too.
The place was finished and he was mowing the lawns, he had a bottle of pop, which in Sweden, even when I was there, had a metal cap that was removed by pulling a tag similar to wine bottles.
He cut himself opening the bottle and wrapped the soft metal round the cut to stop the bleeding.
Died three days later, blood poisoning.
Which is too close to home as my grandad did a similar thing when I was five.
At least you washed the cut .
I have done the same many times but it is worth treating properly, even if it does come over as rather wussy.
A very neat installation in the end, commiserations on the van incident.
Only half a job :) You didn't show us the damage to the lamppost though. PS, its not a dent, its a battle scar lol. Nice panel beating btw.
Claim it on the insurance, or use the Artisan profit from 2021 to get a new door. I don't think Jordan would grudge paying for his top sparky
As I have said previously I am not an electrician or even training to be but I find these videos obviously very informative but just, relaxing. The way they’re shot and the way they run is just brilliant.
Keep up the amazing work Artisan. Definitely my favourite channel on CZcams.
Also Cory, head up, as you said it’s just a van and these things happen.
Agreed :)
Whats the point of paying all this money to insurance if you never use it! Chin up
Can we please get a video of Jordan’s reaction to the van 🤣🤣
Happy days Corey is back, always gets a chuckle out loud from me, and my mrs then thinks I’m a massive weirdo
I have that electric screwdriver from wiha for a couple of years but it isn’t strong enough, I don’t like it. I recommend a other brand but haven’t tested any other yet.
Another great video from the guys. Cory and Ruben work extremely well together and Cory's a great role model for Ruben, both professionally and personally.
Sh*tty buzz with the rear of the van however, you said it yourself, it's only an object and money can fix it 👍
Well done again guys - mighty stuff.
Bosch Go on torque setting 1 won't crack plastic face plates. Very easy to use, good battery life and has push to start function. All the best, Pete 👍
Cory it happens. Like you said it could have been worse. Keep the videos coming. I do not think Jorden will let you pay for it. Its part of doing business and it is insured.
I think the fact it's been used for content means the content should cover the cost :)
Wont need a door. Find a good PDR (paintless dent removal) company in your area.. They'll get that out. Saves Re-sign writing the van again that way
Did that once at a VW dealers when I called to get a quote for damage to a wing (that I did) and then reversed into a metal bollard. 😂
How could anyone give u any grief Corey, u seem to be a really good guy and a brilliant electrician 👍
I’m taking that as a shoutout 💪🏻😂 board was lovely mate, and just goes to show the tails can be cleaned up and look brand new too 👏🏼
👏🏻👏🏻👏🏻
Not the worst car crash on your videos you need to look at Jordans facial hair 🤣🤣
It was only a lamp-post. Corey lamp-posts have feelings too.😱😆😆😆😆😆
Its all good, i reversed a new 19 plate Parcelforce sprinter into a lampost on a Persimmon site a few years ago. These modern vans crumple so easily. Gone are the days of tank like vans.
Brilliant video Cory.😊 Shame for the van but don't worry about it. Jordan is a good fella, I don't think he'll get mad at you for having an accident.🤔 You can try to get it repaired rather than a new door. Best of luck.😉
Cheers!
Cory....Go for the Bosch Go electric screwdriver instead of the Wiha SpeedE. They are a great bit of kit and over half the price. I got one for that exact reason, saves those wrists and elbows during EICR's and just really speeds things up👍🏻
I really hate that feeling when you have a minor accident you cant stop thinking about "if only, if only etc" Like one of the comments said below this is why we have insurance!!! Love your video's and I have to say your Consumer Units are a work of art!!! keep up the good work! PS I am also looking to get one of the Whia electric screwdrivers, I will let you know what I think of them.
Waiting for the link to thomas Nagy repair the lamppost vid
Decided to check out the music page... was not left disappointed! Amazing work mate
Years ago while learning to drive a Datsun Sunny, always in the dark, on quiet roads for some reason, i was doing a 3 point turn and decided to do it under the only working street light on the road, heavy rain and darkness didnt help, so steer to middle of road and then to opposite kerb and engage reverse , and reverse, single street light giving a good view of rear, so i stopped clear of the kerb line, instructor said you can go back a bit more, but try not to hit kerb, so slowly crept back about a few more feet and BANG, THEN BANG again as i had reversed into the lamppost stuck on edge of kerb, as opposed to being on fence line for some reason , then second Bang as shade from the yellow sodium lamp fell onto roof of car, we both got out as neighbours started appearing, and i was told to drive off quite quickly .
Never heard anymore about the incident, despite car having a dent in roof, broken lamp post a huge, L on a triangle stuck on roof as well as signs on side of learner car.
Cory, checked out your music, Ace voice mate! - ah, sorry, electrical comments only here :)
Good to see you back Cory.
Sorry about your trouble with the van . Sometimes stuff like that happen. Its there is keep us humble and to prioritise what's important like Reuban's index finger. He'll need that later. So I'm glad that was saved.
I'm still smiling at the numbers of times Jordan had to let off the handbrake in the new electric VW.
Now there is an exercise in humility !!
Happy New Year!!.
Sentenced to a week in the VW! All long distance jobs...
Who could be so cruel 😭
@@corynoahmac Not me. That's for sure 👍
Top Tip: if you cut you finger put your hand above your head, this lowers the blood pressure in your arm & allows the cut to clot quicker.
PDR will be able to remove the dent in the door & that will save a fortune in labour, paint & a replacement door.
Trying to remove the dent yourself will have made PDR harder so next time as temping as it is don't try to remove the dent.
The bumper cover will need replacing though.
Glad to see that Reuben has been receiving proper training on testing live circuits. Brilliant video as ever.
Thanks for the support!
If you unclip the cupboard door you would have easier access and more light.
Also look into paintless dent removal for the van.
Lamppost, what Lamppost. There it was providing comfort to passers-by in the evening little knowing that Cory ... Did you administer EICR or is the electrical tape only for Ruben.
Smacked my works van on first day at new job ,about 300 metres from yard! It was a pile of junk and I think I improved it !
Nice work lads. Good to see Cory and Rueben again. Rear view cameras for the vans?
Ouch your van got hit. That's okay.. I can't imagine Jordan laughing, not angry at an accident. Cory will pay for it to be fixed. But Great team work! Thumbs up! Cheers! 🤟
2 screws 20 seconds and that Cupboard door is off can be out of the way and stored away safely.
A little tip. Kitchen cupboard doors have a quick release catch on the back of the hinges to remove them easily without changing the adjustment on the hinge itself.
It bother me soooo much watching it and I am like just take the door off!! 😬😄
Watch out Cory, kitchen fitters watching your videos😉😉
Ha ! Yes would have done that first.Hopefully he reads this and enhances his knowledge!
Cory's barber needs a shout-out!
The Wiha Speed-e (first gen) is good but really expensive and only reaches 0.4Nm before cutting out. The speed-e 2 is adjustable from 0.4-1Nm but even more expensive than the 1st!! I have found an alternative, still made by Wiha but in their Zu Hause (at home) range. It has the same Nm adjustment as the speed-e 2 but at a fraction of the price. I’ve used it now for a few months and it’s been brilliant. Only difference that I can see is that the rechargeable battery can’t be changed.
Now I am an apprentice still, in my last couple of weeks. Infact I have my last exam in 2 weeks. I have the Wiha Speede II, I must tell you. It is wrist saving for doing a lot of sockets, switches, breakers, etc. Work that requires lots of screwing by hand
Cory was clearly driving under the influence of pringles, I recommend Pringles anonymous,
Next time do not run water over cuts - it promotes bleeding. Tape it up asap if it is clean (disinfect if not) and allow the blood to clot.
pleasantly suprised with your music. Nice man, liked it.
Cory, I have the Wiha Speede 2. I use it alot for switches and outlets batteries do seem to die fast. It takes same bits as the wiha torque screwdriver
It's a work tool, it's not meant to be shiny. If it's still shiny you haven't used it enough. No point fixing it, it will pick up more battle scars in time.
Tell him you had it 'customised', the van takes up less space now.
I have a Wiha Speede. I find it still needs some work. There is alot of "slop" when using it as a standard screw driver. Spent have alot of torque but I guess to be expected for such a small motor. Will prevent RSI but also will frustrate you.
Say you've got a ring which you need to extend 20cm, can you create a lollipop circuit?
Bit of 4mm2 out of the board up to the trunking, a three way MF lever connector (so you can disconnect for testing) and run the ring from that. I can't immediately think of a reason why it wouldn't be safe. I think the biggest issue would be testing it but it's accessible and you can stick a label somewhere. You're allowed to parallel conductors, you're not creating a split ring or a cross connected ring or anything. Might save a few extensions? Maybe it's just a bit too confusing and not worth the hassle.
It would be fine (normal even) to run a 10mm2 cable out to a garage, put in an DB with a 32A MCB and run a ring final from that. If you were to just move the 32A MCB to the start of the 10mm2 cable it would appear to achieve the same effect. Could be useful if you've got a redundant cooker feed in a kitchen too, otherwise you'd just turn it in to a radial on 4mm2.
Maybe there's already a name for this that I don't know about!
If that board change isn't your best, I would love to see what is. Looks like an absolute work of art.
It’s good to see you back Cory.
Another great video from the both of you.
nice to see Rubben again
Hope you're better with the electric van while your van is fixed, than the boss was! But of course no one hurt, great vid.
Plenty of dent removal folk who would get that dent out and with a bit if polish to the paint - you won't notice it
Good to see you back on screen its been a while fella 👍
I wouldn't call that a crash. I'd call that a whoopsie. It's just a ding, I'm sure your boss has done the same at some point in his or her career
Accidents happen fella.. good video and im sure youl get the van sorted with Jordan.
When you need to "work through" your injuries, try alum to stop the bleeding, then super glue for wound closure. You can cover the glue with a small bit of tyvek if it's in an area that gets stretched a lot... Also keep some *instant cold packs* handy for when you bash yourselves... Getting cold on a contusion *fast* will reduce bruising and speed healing.
Good to see you and Reuben back in front of the camera =- make up the dent to Jordan by composing original music for the channel :-)
Right between the rear parking sensors 🤪
😬🤦♂️
Not an idiot. Just unlucky. Dull light, end-of-day, been working the show for hours, post behind a van. As others say PDR will get it 99%.
Great board change, looks really neat.
Van, that will Tcut out 🤘🏻👍🏻
Only feedback is maybe remove the customers washing up bowl before rinsing finger blood into it next time 😂🤪
It's interesting coming from North American electrical to see the differences in the UK... Junctions are handled so differently here... Has to be in a junction box, and can't be concealed at all.
Unlucky with the van. The vid was entertaining as usual. 🍻
great video and its great seeing u guys are using dust sheets now
Don’t pay for new Doors 🚪 mate… Jordan will cover it as good boss 😇🐥
It’s only metal, nobody was hurt, that’s what insurance is for.
"proud of him" aw, Corey is finally bonding with his son over bonding.
there is a big difference between a smack and crash
Best part of the video is the crashed van
Shit happens mate ,the insurance will cover it ,Jordan is lucky to have such a good worker who cares about his job!!they are hard to find trust me ,i run my own business and i know this too well
Hey cory, why don't you make a video talking about your ferfamenta? And by the way, do you like this model of cutting pliers from ck so much so you don't switch to one from knipex?
You have a great sense of humor Corey! You are hilarious. Great video.
soldered connection and heat shrink? You are quite lucky, such a job would not qualify for a professional job over here. Why not use wago connectors? Also, that cable connector on the kitchen floor under the cabinet... I really hope it never get wet. Nice videos, and i am sure you know what you are doing. Just never thought that stardards can be so different in different countries.
No cables are soldered here in this video 😁👍🏼
Yay, a Cory and Reuben video!!
Not the best Start to January for you guy , With what happened with the Nightmare new Electric van and Reuben cuts his finger + Cory hit post with the van. (That’s really sucks for you Cory ), I m Sure Jordan will be ok in a van things happen, great to see you guys back on CZcams and doing a great job As always ⚡️👊
Curse of the Vans?
Nice neat cable dress! I would love to see an extension being made:)
That’s what insurance is far. Beside Jordan has bigger problems trying to off load that electric van. 🤷♂️😂😂
Great job .. watching from Italy...totaly a different way of electrical work...
Top video and as requested I have just started following you on instagram and love your music especially your own track a man of with many talents oh better not praise you otherwise we will never hear the last of it on hear 😂😂only kidding you sound really good I sing a pop choir just wish I had your confidence to performance or sing solo always feel safe in a choir my brother in law is like you he plays guitar and sings and is trying hard to get me and him to do an open mic together 🙄😎
The lamppost was moving so quick nice job though.
Forget the speedy just ask Jordan for the 12v hilti drill that comes with all the different accessories it's far better than using an impact driver
You can get a panel beater to push to dent out and it we'll look like it has never had a dent in it good luck .
Where are the fleeces from? Really like the look and design and I am interested in getting one?
Cory Accidents happen.. You should not be paying for it, I would hope Jordan would understand its just part of business costs (Obviously dont keep doing it).. Its annoying I know but you do a great job and any employer should look after you, its one of the big advantages of being employed rather than self employed.. Your not the type that has been reckless.. Any employer that would accept you paying for that accident your too good to be working for...
I am sure Jordan will do the right thing..
I crashed my company car in a morrisons car park age 21, had to sheepishly phone my boss to tell him, thankfully he was alright about it, luckily a load of other guys had accidents.. I did about £4.5k worth of damage, although ironically the repair shop took over 3 months to repair and when I got it checked out at a main dealer turns out they had done £6.5k worth of damage by trying to fix it...
Cory the cool electrician, First Aid administer and now super panel beater. Is there nothing this man cannot do . :)
He can't reverse a van... 😏
@@artisanelectrics Well there is that. lol
try a panasonic EY7410 3.6v I have had 2 over the last 15 years they are perfect. Alf in melbourne Australia
Looking at the damage.. fully repairable 👍🏾. I’d do it for you if you were closer 😊
Great video as always, love your humour Corey, and Rubben, the legendary sidekick!!! That is one mahoosive box of chocolates!! 👍
Don’t worry I didn’t reverse into a lamp post I drove into one head on in a week old electric van, my foot slipped! It happens but I wasn’t as good as you and I didn’t offer to pay to fix it 😂
Cory needs a rubber VAN !
Or a rubber bumper
11:30 Reuben is picking up Cory's humour I see 😂