Omg! Thank you so much for this video! Myself and my brother in law tried for hours to hook it up. I watched this and within an hr everything was hooked up!
Thanks for the detailed fuse explanation, but you probably installed the wire directly over the A pillar airbag. Did you pull the trim to confirm you were not blocking the airbag?
let me know if you get rattle on yours! I have this same exact model but it vibrates like crazy against my windshield (i've remounted it several times but no luck). Only really happens at higher speeds however, could also be because of the piped in cabin noise too. Clean install though, hide those pesky wires!
@@turbo_tin probably hard to compare I guess, I drive a 2022 hyundai veloster n at the moment so hard to compare to an FL5 (although I guess I'll find out here in a few years if I find one). I get rattles with my dash cam however in my softest suspension mode (even on 18" wheels with more side wall). I'm actually starting to suspect the rattle is coming from something with the GPS module of the dashcam itself because I'm still hearing rattles coming off of it even when I'm applying pressure against it with my hand to hold it snug. Maybe my unit just has a faulty GPS module, let me know how yours goes!
Will the dash cam stay on and powered when you turn the car off? I seen that it has parking mode and that you have to enable it because it's off by default. Though on mine that I just installed today... when I turn the car off even after enabling its still turning off I think. I might need to switch the fuse taps around
Have you had any trouble with the SanDisk High Endurance sd cards? I'm troubleshooting some issues I'm having with my Viofo cameras not recording but 1sec or 45sec videos even though there is space. I read online that the "Max" Endurance is recommended over the "High" Endurance and wondering if you have had any recording problems?
@@turbo_tin Possibly! I had them set to record 10 min intervals but sometimes they would and other times they wouldn't. I brought them inside last night to reconfigure some other settings (like turning motion sensor off, changing the file format to .ts instead of .mp4, etc) to try to fix it, and that's when I saw that Viofo recommends the Max over the High endurance sd card. I also thought that maybe the problem is the power cord and I should hardwire them, which is how I came across your video. I'll test them again with these new settings, and I've gone ahead and ordered Max endurance sd cards. Hopefully one or all of those things fix it! Thanks for the tutorial! I'll be referring back to this when I get to the hardwiring point.
Hey I got a question, do all of these (beside the dash cam) come together with the dash cam purchase or do you have to buy them yourself? If you have to buy them yourself do you mind sending them?
They didn't come together with the dash cam. You can get these: MicroSD: www.amazon.com/SanDisk-Endurance-microSDXC-Adapter-Monitoring/dp/B07NY23WBG/ref=sr_1_3?crid=8CGBF1JJ22AR&dib=eyJ2IjoiMSJ9.shXdsr1hscKraEVtKfvIUX5O6Y7B4Fhp5RNyUg4zJxDrYFEaYFL9ZF5sgiifd6x_3BLyGdRTOFPK38azfJflPAADoRU5Dr3CvqjnTS8Cq61G5SU7NUi7EvKTGcR1dxe2_-BJb1aaLA1OjDWbnzMwJRI72QKreY9RTqcZI7uXFHrdEYHCsDfPWQK3G-KNNNsES_rjpOUxccieS0NqudyBcnLUwNpEtRJNsjSuDVpu0eI.NpOcNpxpwBekonMz783VZ6-bCg4SxYVDquvtBqV0gLY&dib_tag=se&keywords=micro+sd+card+dash+cam&qid=1711936634&sprefix=micro+sd+card+dash+cam%2Caps%2C96&sr=8-3 Fuse tap: www.amazon.com/gp/product/B0742BZXC2/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 Hardwire kit: www.amazon.com/gp/product/B07JQ1JYPJ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Omg! Thank you so much for this video! Myself and my brother in law tried for hours to hook it up. I watched this and within an hr everything was hooked up!
Glad it helped!
Just what I was looking for not to many videos on 11th gen civics thnx
Glad it helped. Thanks for watching!
Thank you for the video I used this as a guide to stall my a119 v3 in my 24 si. This video applies to all 11th generation civics
Glad it helped!
Definitely a much needed addition. Nice.
For sure! Thanks for watching Adam!
Great video. I thought I was going to have to go thru the firewall. Thanks now I know I don’t!
Glad I could help!
Appreciated... Thank you!
Thank you sooooooo soooo much this video really helped me put my cam in … cheat codes are always helpful ❤
Thanks for watching. Glad it helped!
Thanks for the detailed fuse explanation, but you probably installed the wire directly over the A pillar airbag. Did you pull the trim to confirm you were not blocking the airbag?
What setting did you use on the low voltage battery protection switch?
let me know if you get rattle on yours! I have this same exact model but it vibrates like crazy against my windshield (i've remounted it several times but no luck). Only really happens at higher speeds however, could also be because of the piped in cabin noise too.
Clean install though, hide those pesky wires!
I'll post an update vid with the dash cam. What suspension mode were you in when it started vibrating? Thanks for watching!
@@turbo_tin probably hard to compare I guess, I drive a 2022 hyundai veloster n at the moment so hard to compare to an FL5 (although I guess I'll find out here in a few years if I find one). I get rattles with my dash cam however in my softest suspension mode (even on 18" wheels with more side wall).
I'm actually starting to suspect the rattle is coming from something with the GPS module of the dashcam itself because I'm still hearing rattles coming off of it even when I'm applying pressure against it with my hand to hold it snug. Maybe my unit just has a faulty GPS module, let me know how yours goes!
@@turbo_tin czcams.com/video/mQrIbaG7w28/video.html uploaded a vid here /w rattle in full effect if you wanna hear what to look out for
Oh man that's pretty annoying! I'll keep you posted
Was the interior fuse panel exposed or did you pull an interior panel to get to it? I swear I’m missing a panel lol😂 thanks
There wasn't any panels lol. It's exposed
Will the dash cam stay on and powered when you turn the car off? I seen that it has parking mode and that you have to enable it because it's off by default. Though on mine that I just installed today... when I turn the car off even after enabling its still turning off I think. I might need to switch the fuse taps around
Mine will turn off after a bit and automatically turn on when it detects something. Check your tap
Just wanted to confirm if you used 45 ACC 10A ?
Why didn't you use the empty slots?!
Do you have a link to the fuse taps you used?
Here ya go
www.amazon.com/gp/product/B0742BZXC2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
How the hell did you take that cover off?!?!?
Have you had any trouble with the SanDisk High Endurance sd cards? I'm troubleshooting some issues I'm having with my Viofo cameras not recording but 1sec or 45sec videos even though there is space. I read online that the "Max" Endurance is recommended over the "High" Endurance and wondering if you have had any recording problems?
Hi Sydney. Sorry to hear that. I have not had any problem at all with the high endurance card. Could it be your recording intervals?
@@turbo_tin Possibly! I had them set to record 10 min intervals but sometimes they would and other times they wouldn't. I brought them inside last night to reconfigure some other settings (like turning motion sensor off, changing the file format to .ts instead of .mp4, etc) to try to fix it, and that's when I saw that Viofo recommends the Max over the High endurance sd card. I also thought that maybe the problem is the power cord and I should hardwire them, which is how I came across your video. I'll test them again with these new settings, and I've gone ahead and ordered Max endurance sd cards. Hopefully one or all of those things fix it! Thanks for the tutorial! I'll be referring back to this when I get to the hardwiring point.
Best of luck!
Hey I got a question, do all of these (beside the dash cam) come together with the dash cam purchase or do you have to buy them yourself? If you have to buy them yourself do you mind sending them?
They didn't come together with the dash cam. You can get these:
MicroSD: www.amazon.com/SanDisk-Endurance-microSDXC-Adapter-Monitoring/dp/B07NY23WBG/ref=sr_1_3?crid=8CGBF1JJ22AR&dib=eyJ2IjoiMSJ9.shXdsr1hscKraEVtKfvIUX5O6Y7B4Fhp5RNyUg4zJxDrYFEaYFL9ZF5sgiifd6x_3BLyGdRTOFPK38azfJflPAADoRU5Dr3CvqjnTS8Cq61G5SU7NUi7EvKTGcR1dxe2_-BJb1aaLA1OjDWbnzMwJRI72QKreY9RTqcZI7uXFHrdEYHCsDfPWQK3G-KNNNsES_rjpOUxccieS0NqudyBcnLUwNpEtRJNsjSuDVpu0eI.NpOcNpxpwBekonMz783VZ6-bCg4SxYVDquvtBqV0gLY&dib_tag=se&keywords=micro+sd+card+dash+cam&qid=1711936634&sprefix=micro+sd+card+dash+cam%2Caps%2C96&sr=8-3
Fuse tap: www.amazon.com/gp/product/B0742BZXC2/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Hardwire kit: www.amazon.com/gp/product/B07JQ1JYPJ/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
When I use those fuses my heated seats and car display stopped working. Is there alternative fuses?
Are you doing this install on the FL5? There's no heated seats
Ya same problem here, not sure which fuses I should use
How did you reach the ground bolt? It's a very tight space and I can't reach it with a wrench.
Took me a lot of time and efforts but I just used my hands and sockets
Did you? I have tried everything but no success
How did you loose the 10mm bolt for grounding?
Hey, do u have a discord or anything? Would love to join, you seem very knowledgeable
I don't have a discord but you can message me on Instagram and I will answer your questions. @turbo.tin