love the video! iffu put an amazon affiliate link in the description, when I go to buy it you'd get paid a portion from my purchase. Just some food for thought :)
It looks good but if you want to get more stability in the front you should cut your sway bar links down so the sway bar is parallel with the ground at ride height.. same reason the rear sway bar had the different length bolts.. it made a noticeable difference on my truck.
Hello, your work is incredible, I have a similar pickup, where did you buy the rear stabilizer bar? And what car is the differential, what did you put in it? Greetings from Mexico
Thank you very much my friend. I ordered the stabilizer bars from Belltech Suspension. Both front and rear are available on their website. The differential is a 4.3 Dana 44 from a 93 Isuzu Rodeo 4x4. My only complaint has been that the gearing is a little too short for comfortable highway use. Just keep that in mind if you drive long distances 🤙🏻
Man something to definitely think about before completing the swap. I used a 4.3 with the stock D21 trans and ended up having no top end. Granted it accelerates like a mfr but it won’t cruise comfortably over 60 so I lost my highway cruising ability. I mean don’t get me wrong, it’ll do it but it’s 3k rpm’s at 60-65mph
If you’re referring to the traction bars from the LCAs to the front rad area, they’re definitely there and in tact ….. they’re just really reaaaally smashed up and they were pulling themselves free 😂 it’s ok tho that truck is dead now
love the video! iffu put an amazon affiliate link in the description, when I go to buy it you'd get paid a portion from my purchase. Just some food for thought :)
yo thanks for that!! Fixed it! I really appreciate that
Great build! I have a 97 D21 too. Just stubbled on to your channel. I'm close to Portsmouth too. Would love to see it in person!
Thank you & welcome! I’m around the 757 a lot so maybe sometime in the near future! I go to any of the meets and such around here that I can/know of.
Great video, with a lot of good info, thanks man👍👍
Thank you! 🙏🏼 I really appreciate it!
It looks good but if you want to get more stability in the front you should cut your sway bar links down so the sway bar is parallel with the ground at ride height.. same reason the rear sway bar had the different length bolts.. it made a noticeable difference on my truck.
What rear end do you have on your truck? I noticed disc brakes
Hello, your work is incredible, I have a similar pickup, where did you buy the rear stabilizer bar? And what car is the differential, what did you put in it? Greetings from Mexico
Thank you very much my friend.
I ordered the stabilizer bars from Belltech Suspension. Both front and rear are available on their website.
The differential is a 4.3 Dana 44 from a 93 Isuzu Rodeo 4x4. My only complaint has been that the gearing is a little too short for comfortable highway use. Just keep that in mind if you drive long distances 🤙🏻
Sonic on Cedar in Chesapeake is holding a cars and coffee. Hope to see you there!
when are they doing that? I’m going to pick the truck up tomorrow morning. Had some exhaust work finished up
The sign said 9 - 12
@@svtctr tomorrow?
im doing the xterra 4.9 diff on my drift d21, hopefully it goes well
Man something to definitely think about before completing the swap. I used a 4.3 with the stock D21 trans and ended up having no top end. Granted it accelerates like a mfr but it won’t cruise comfortably over 60 so I lost my highway cruising ability.
I mean don’t get me wrong, it’ll do it but it’s 3k rpm’s at 60-65mph
What are the silver wheels width and offset? Not the level 8's in thumb
they’re like 17x7.5 +25 I believe. They’re Toyota sequoia wheels
beebanicustoms 4-link for the rear????
I got mine :)
What wheels are those because I need so new wheels for my 95 also when it was na did you have problems drifting
I didn’t really drift it at all when it was NA tbh. Just donuts but it was a gutless pig. && the wheels are 17x9 0 offset Level 8
The traction bar on the left. Looks broken.
If you’re referring to the traction bars from the LCAs to the front rad area, they’re definitely there and in tact ….. they’re just really reaaaally smashed up and they were pulling themselves free 😂 it’s ok tho that truck is dead now
Johnson… pizza Johnson pizza