Stalling While Driving! 2009-2012 Infinity FX35 3.5 P0014 P0011 Exhaust Camshaft Timing
Vložit
- čas přidán 19. 09. 2023
- Constant Distractions! Layers of Obstacles. Infinity FX35 3.5 VVT P0014 Exhaust Camshaft Fault • Constant Distractions!...
Support the Channel with a Like and Subscribe!
Become a Channel Member or visit Patreon at / rainmanraysrepairs
Visit our Second Channel on CZcams, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Located in Florida? Need work done?? Visit www.RainmanRaysRepairs.com
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrepairs.myspreadsh...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to - Auta a dopravní prostředky
Good job ray. As a mechanic for over 40 years, i always seem to learn new ways to do things by watching others do it. And yes by all means video the rack and pinion and cv axle boot.
I would indeed like to see the CV axle job on that particular Infinity :P
Yeah !!
Best advice on buying a used car, buy a car in which they made a TON of them and they are common in your area. This is so you can actually get parts for it at a reasonable cost when the stuff breaks. And local mechanics know how to wok on the stuff since they have fixed that particular model in the past.
I have a friends Infinity in the garage. I cant get aftermarket ball joints for it since they are built into the control arms. I need new control arms, but can only get OEM at a cost of $900 for the pair. Same with struts, it could use new struts, but I can only find OEM at a cost of $400 per strut. 🙄If it were a common Toyota or Chevy, I would be at $400 into parts as opposed to $1700.
Congratulations on the fix. Can tell there's some weariness going on.
It's a massive achievement in such a short time.
Give yourself a break, everything is awesome.
Yes Ray we want to see all the glory on this car
Yes, I want to see the cv axle and whatever else repairs left on this vehicle. ☑
Yes, show us the rest of the repairs. These fancy cars always throw a curve and its a good way to learn things.
I'm worried! Are you okay Ray?🤷♂️" no need to waste a whole can " of brake clean! 😂😂😂😂😂
Fantastic Video can't wait to See the CV Axle Repair On This Infiniti !!!!!!!!!
I want to thank you Ray, for making videos I find myself trying to look around objects in.😂 Have yourself a great day!
Whew I thought it was just me 😎
Me too 😂
I just came across your videos today started watching and paying attention. You seem like a very good technician. I will continue watching your videos because you really know what you’re doing I can see so like I said I will continue watching
A lot of good lessons in this one! Never heard of the magnetic clutch exhaust valve control - now I have no excuse not to avoid that. Amazing amount of work to replace that thing - people need to see this! Sounds like a simple job, but noooooo! It's the price you pay for having a luxury car, I guess.....
BMWs are worse because of the specific diagnostic tools required to find those issues/codes. Some shops won’t touch those European cars because of this. Replacement parts are also a premium. They’re awesome vehicles and money makers for independent import shops.
The engine can be considered unusual for it's use of variable dohc tech. How has this engine fared over time? Good tech? Too many failures?
@@thomasmleahy6218 Nissan makes very good engines. As with anything mechanical, there will be failures. Nissan and Infinity share drivetrains (the majority of them) I deal mostly with Toyota/Lexus and that’s the way they do this.
@@thomasmleahy6218Toyota also has dohc vvt on their V6 engines. But they use oil pressure instead to move the cams.
Great catch! Not many mechanics have the patience and determination like you to actually find the faults. Well done!
Parts from Dubai? The new part will have a lotta miles on it already. Dubai?? Just a quick dash to the auto parts store.
@@thomasmleahy6218 You get parts where you can get them. Ray did mention that the part isn't available anywhere. Same with the gasket.
Rain man…
I enjoy your commentary, and you constantly remind me why I quit working on cars🤠🤪
This is how I like my morning to start!!! Death to short videos 😂 morning Ray!!!
I would most assuredly like the other repairs to be recorded and played ! Every bit of learning is valuable in some way and besides my daughter has a very close car to this car and the repairs are unusually personal in nature! Please continue the path you are on with this one! Please don't let the negative people involved with your endeavors , they are not worth the effort or time! Only positive influence can push life along!!! Take personal time with the kids, they will be grown before long and you don't want to miss that! Cool they can be close at the shop, I absolutely loved my shop time with my papa bear! Family then friends and then business and you will be eternally successful!
Be sure to protect the kids from the: cue anticipatory orchestral exclamation (the dreaded brake clean elixer). Adults only!
Eh, I wouldn't undervalue the negative that way. Not all things that are negative are inherently _bad,_ after all, and there's the concept of "toxic positivity" out there as well, so not all things that are "positive" are "good," either. Sometimes what people label "negativity" is rally just someone trying to keep you from getting unnecessarily hurt or following a genuinely dead-end path in life. It takes some life experience to tell the difference between someone trying to keep you from getting hurt form someone trying to control you for their own benefit, though.
Leave a rag hanging between the vice jaws like a sort of hammock, when youre punching small bits like those pins out. The rag will catch the pin so you dont lose it. Bonus is you dont have to bend over to pick them up. Theres already enough bending, flexing, and contortionist practice in our field. No use making more.
So glad I run a 50 year old Landrover after seeing all that tech stuff....scares me......great video as always Ray.
Outside noise just adds to authentic video's Ray.
Hello everybody, good day to you! Welcome back! Glad you are here, I know I am!
Said by a Florida man!
Happy hump day Ray. To infinity and beyond. 😊
Wall looks good ray new paint makes it look like a new shop 8:10 @Rainman Ray's Repairs
Check when the last oil change was done. Oil changes done regularly are crucial for issues like this.
Me myself I want to see everything...maybe I'm ocd...or bored with life in general and have nothing better to do...but I find mechicanical repairs interesting while I'm sitting around bored in life.. this stuff gives me a reason to keep wanting to wake up in morning cause you seem to have a fresh road kill repair job waiting for my eagle eyes to pick thru even though I have a canteract level 3 right eye ball n a start on left one plus I'm mechicanical on my brain...if I ever end up in a coma I hope your still doing vids maybe they'll play em for me ...note to brain make a note.....cool keep em up ....
I love my 1/4" drive screwdriver handle with a shallow socket for those awkward spots. It helps to have a little smear of grease on the bolt head to keep it glued in the socket while positioning the bolt. Doesn't work for every application but saves a lot of stress in tight spots with my large hands and sausage fingers.
You do a MUCH better job than I do. I repair our cars always. The only difference is I always have "choice words" for the design and engineers of modern cars echoing from my garage into the neighborhood.
Yes on the CV axle replacement.
From your UK viewer brilliant video as usual fantastic.
Nice video. Thanks for posting.
Of course I want to see the CV axle job! Great repair to this VVT, Ray b
This is why people choose you for their car repairs. You take the time and put in the effort to do things right the first time rather than rushing jobs out the door
Morning
Very realistic repair video, thanks for sharing this repair job with us.
So good to see you go above and beyond the obvious and remove those layers of the mechanical onion to get to the 'real' issue.
Seems the 'other' mechanics are too afraid to do so.
Nothing worse than spending good money after bad only to have the issue re-appear because of a lazy mechanic and lack of due diligence.
Another mechanic would probably recommend replacing the engine (with a junkyard unit, of course), or scrapping the entire vehicle. 😒
Great job Mr Ray hope y'all have a wonderful day
Another fine repair for you, and a learning experience for we viewers. Great job. 👍
good work
thankyou Ray,,im sure everyone would like to see the rest of the repairs on this so go ahead,,
have a great day,,👍👍
Good Job
Film the rest of the repairs Ray 🙏
I was looking forward to this episode because I thought for sure it was a misdiagnosis. This is why Ray makes the big bucks.
Good sir, you taught me something new with the tensioner ears. I don't recall seeing them on my vehicles, but I'd never looked for them.
Thank you for another good video for us man. Be safe!
Yes, I would enjoy seeing more videos of repairs to this vehicle.
Brake Clean effects ALWAYS get a like from me! Cheers Ray!
Top job ray awesome job 👍👌❤️🔧🔧🔧🔧
Excellent job diagnosing the actual problem out of the gate. Well done.
Nice repair! I have an FX35 with 235k miles on it and it's still a nice smooth ride. Would definitely love to see more FX35 repair videos!
Wo!!! I thought my 2009 fx35 was the ONLY ONE left with over 200 THOU. Its running great still. I would LOVE TO SEE MORE FX35 engine repairs, as i WIL NEVER EVER GET RID OF MY infinit. i luv this suv. looooovvvvvvveeee iiiittttt.
Funny thing...
When you took the shop on. You were fine with the worktop cutting guys. (You are a great guy so probably are...) but waaaay back then. I woundered how long before thy begin to irritate you with the noise....
Well. I have my answer. I take no pleasure from it.
Now. I'm looking forward a year or two when you you buy them out to expand.
Yes. You can. We are so behind you.
I actually believe these vids you post make you a better tech/businessman...
Go Ray & Laren... never forgetting the support team - who make you who you are... so please stop 'hazing' Troy - less he leaves and takes his loverly lady with him....❤
When I first saw the Exhaust Camshaft Timing in the title, it reminded me of 30 years ago when my x-wife almost fell for a mechanic telling her she needed a new muffler bearing. Keep up the great work, I love your videos!
Yes, Ray, Show us it all.
great job trouble shooting the problem. it must have been costly for the repair, now all better
and running like it should be ! cannot wait for the next installment.
Yes Dr. Ray, please do more videos of this car. I ve owned one for years and I DIY it so I’m trying to learn as much as I can. You tube doesn’t show a lot of repairs for the fx35 line. Thanks
You may want to find a magnetic bowl for the hardware. It has kept jobs easier for me.
Hi ray just finished watching Infinity excellent video I enjoyed it learning a lot you’re excellent mechanic and smart and as always you and your families be safe yes I want see cv replace 🇺🇸🇺🇸
Awesome job ray!!!
As always! 👍😉🫡
Great video
Great repair as always ray Stopping smooth always nice when a stalling condition is fixed 35:04 @Rainman Ray's Repairs
Thanks for the video and yes i would like to see you finish the Infinity repair. Oh Troy is being Sketchy.....
Ray You are The Master
Cv's.Hrll yes
Nice video Ray.
Yes it would be nice to see more of the work for said vehicle please.
I always joke with my wife and family that the stains on my hands after working on something is “clean dirt”. It’s been an ongoing joke with my family and my former coworkers.
I have a tendency for telling folks that my hands and/or clothing is clean because they were just washed, just stained. If you don’t believe me then smell the clothes, if you don’t believe about the hands then watch me wash!
Enjoyed your video I thank u God bless
Another excellent video on an odd repair. I can get over all the cracked dashes on Newer Nissan/Infiniti vehicles 🤔
yes on the CV joint!
Cheers again Ray, I'd vote to see the CV axle job for sure
You do a great job on your projects keep up the great work
Thank you for cleaning and painting the walls, I mentioned it. Yes dowels always fit tight in the block, in my cases too tight, like you aren't getting them out tight.
Again Ray, better you than me! 😊
Another great job. No need to ask…. We always want more repair videos. Yes, please. Steering rack and C/V axle too.
Always interesting how much you have to be a contortionist to get to some of those fastenings! Damn those designers! ;-)
I’ve always thought that the designers should be forced to work on their engines etc to see how difficult it is for the mechanics to do their thing.
Nicely done Ray! Thanks for another great video!!
Im surprised Nissan didn't have a gasket you could order, it's where I ordered my replacement gaskets from. Granted, that particular cover didn't fit my Maxima, & the ones from DuBai don't come with gaskets...neither do they come from Nissan when you order the Cam Cover. It is nice that they come with the VTT though. It's also good to see DoBe parts work though...
I had the same code P0014 on same bank for at least a year & it never made my Maxima stall. I could feel a lack of power when leaving a light. It make my CVT "shift" early.
Yay a success!! I hope you'll get to unwrap your No Codes Present very soon!
Yes show all of it.
Another good video as always!! Yes I would like to see you do a video on the CV Axle repair please.
Have a good day ❤
Show the video of the repairs. It may help someone else later on with the same problem. It has been many years since I had done vehicle repairs, since I started working as a tax accountant some 44 years ago. But now that retirement is around the corner, I will be doing more of my own repair work. Also watching the repairs gives me an idea of what new vehicle I would like to get, based on how much of a pain it would be to work on it. Thanks for all of your videos. You are willing to share even the few failures to save someone else from making the same mistakes.
Nice work ray another day and another great video
I had to chuckle when reading a comment below. The person stated: :I find myself trying to look around objects" - lol - I thought I was just being weird doing that! I know these videos are 2D but I do catch myself craning my neck to look around things...like that would make a difference! lol.
Amazing diag-nosis on this. Not only knowledge of the systems, but getting to the possible offending part. I continue to be amazed at your non-reluctance at removing items to get to something, AND putting all the fasteners back. Some may have left that very hard to get P/S bolt out. Who would know? Thank you again for showing on video how proper procedure is. It's not always about how fast the job is done, it is how well it is done.
That was real quick on MAF being disconnected - nice
Like your explanations of the parts and the work . Like Troy too . Troy should do a few videos . Like wife units help too . Very valuable to have her at the shop ! This car is interesting .
I think a little black RTV helps. Good Job Ray
I had some doubt about the new aftermarket cam position sensors, but your call on the magnetic actuator was spot-on. With my level of shop experience, I would have tried to bench test the magnet. You knew what you were looking at and I would have been poking in the dark.
It's always good practice to bench test and confirm faulty parts so you don't end up firing the parts cannon.
Yes...continue with next vid on completion..pleeeease
I love your videos, you are very good CZcamsrs.
Enjoyable video 👍💯
Good morning from Higgins lake Michigan
Would love to see the rest of the repairs
Yes!
Welcoming back!
Yes we want to see the cv axel job.
Next time you have to punch out studs like you did, take some painters tape, stick it loosely under the stud. That way when the stud comes out, the tape should catch it. If you are punching from the end that doesn't stick out (like you did this time) you can even press the tape against the stud so that it starts off with the stud and tape stuck together.
I don’t know how you remember how all those parts fit together.
Thanks Ray I enjoyed the work on the infinity 😃😃glad you used the oem part instead of the cheapo. Tom
Yes
Morning Ray!
Well this is a new one on me A what? no doubt you will sort it with your brilliant brain ,thanks for the video
yes to the extra work videos please ray.
71st! Hope you all are having a wonderful HUMPDAY Ray and the wife unit, never forgetting the THREE new employees! Roger in Pierre South Dakota
Good video Ray. Have about training Lauren on the CV Axel repair
Dam good Job on the bracket bolts!
Dubai? Wow!