Proof Of The Stan Meyer Alternator
Vložit
- čas přidán 10. 09. 2013
- here is a meyer type alternator set up
Proving meyer, one step at a time
no its not done yet
reloaded from previous videos, ...........what you going to see in Boulder Colorado?
Nothing like this i bet!
Plenty of talking there, Here WE DOING!
irondmax.com
stanleymeyerwebshop.com - Věda a technologie
Just like a well tuned banjo, except that it sounds way better, and no one wants to use it for kindling to start an accordion fire.
You're doing great stuff Max.
Looks great! I believe that is the best gas production I've ever seen on plain water. Thanks for sharing. "D"
Awesome vid man. U keep on proving stans work was legit science. U should be proud
is this alternator running on low volt high amp output?? like a de palma generator?or a simple electric welder type transformer?
On the energy to hydrogen production just how many waters are being use and how does it differ from other hydrogen generators and finally how many therms does it generate. The reason I ask is I’m thinking of system condensing boilers typically in eu market and if it could run as a replacement to replace the gas pipe
Nice work Max looks great keep it up my friend!
Cool. Good work my man, you guys are awesome.
Stan Meyer 10xa Conference, on Oct 2014
i bought a resonant cavity from an old antique record player, amasing stuff. expansion and compression waves.......put sound in the big end and they are compressed and come out the little end. same sound just smaller. i am curious, how can i test the sound wave? will one of those guitar tuners show me any differance in the compression wave, verses the expansion wave?
i dont know
yes you can cook with it, meyer had a patent describing how to make the burner.
any pressure will make a bigger explosion of the container. there has to be a spark to ignite it, but if it ignites, your dead, you can make or buy a separation cell, then contain just the hydrogen up to 3000 psi. if there is any oxygen present, then it explodes
I use a flash arrester from Justin jdc products, I can link you to him if you like
Excellent demonstration Sir👍👍💪💪☝️☝️👌👌🙏🙏
once again awesome work....@ puchta how did the searl thing go
nice,Max,did you rewind the alt?from what i see there are 50-60v on that cels.Can you open a thread on your forum?i am working on the alt setup and i have some problems with the windings.thanks
Hy Max whats the voltage on the tubes,looks like 100v
good job Max.
3 simple questions.
is it possible to cook with this gas?
how far can i go in pressurizing it to create torch?
any ideas how to make easy flash arrestor?
thank you
What more can a man ask for! Beautiful videos, thanks
Popcorn 🍿?
i think evidence in video format is priceless
pictures are also priceless
and yet people still argue.
and yet
HERE BE BUBBLES!
absolutely beutiful work brother....
Undoubtedly💪💪👌🙏👍👍☝️☝️
is tap water? how many liter per minute?is possible you send project?
How much gas production vs watts in ?
thanks buddy......so many projects, not enough time.
gas gun is on my list to assemble
Great ! I like it, I'm addicted to bubbles.
i agree, thanks
Great Work!
How is an alternator made to lock feed a VIC in resonance?
Thanks for all your hard work Max, i hope its something that we can all actually USE someday. Hows the gas gun project going?
The "SR 71 Blackbird" was designed in the early 1950s, & it seemed to work fairly well, a bit of a fuel hog, but it was elegant, it's obsoleteness aside.
Great minds are not measured by the era, but by their comprehension of the universe & how they have helped the rest of us, understand this present reality we are living through.
Anyone heard of the fable were a bunch of scholars try to describe an elephant with blindfolds over their eyes?
No one agreed upon what the object was.
HHO 4 PEACE
under what parameters does this reaction occur?
The dielectric property of Water is unique in that it makes it to lie in the centre of the triboelectric series of materials, this is something I have tinkered and introduced. It does not have a Capacito-inductive break down voltage, and is also classified as a Potential Electrolyte☝️☝️
Does the cell get warm?
How I can build a cell like this?
Pls
In details 🙏
How is it done ?
thanks, more good stuff coming up
wow, nice max. is it just my eyes -- or are there a much larger number of "beefy" bubbles coming from that one front and central pair of electrodes as opposed to the rest? Great work dude, thats impressive for tap water/HV
working on it
thanks
I could be persuaded, see you on the forum
one day you'll get the water powered car running.
Interesting. Thanks
thats a beutiful sight man!
Ah of course, I was forgetting something. When you use hidrogen to combustion.. At the end of the hose, please, use magnets to line the particles.
David,You are correct about the greed will catch up. Indeed, in many ways it has already surpassed us, racing toward a dominion over others as an ending. And yet, Creation has a way of breaking out, including us in its wake, if but only for a brief moment. YOUR Genius will either engulf you in darkness, or splash upon the earth a new color of light. Oh the flame of fame, how it burns with delight, rushing upon the innocent to extinguish the last light ...It ain't about HHO, its about citrus mold
relamente esa produccion es impresionante, estoy empezando pero algun dia quiero lograr lo que tu y ayudar a los demas a lograrlo gracias dios te bendiga
.thank you
god bless us all
In all serious and due respect Max, the comment "Mee" made is not an unfair one. I appreciate the steps, tests, and attempts at proof of concept that you and everyone else does to further the HHO community. But there is so much time that has passed and countless videos like this out there. The HHO community is great because we can all learn from the success that some have as well as the failures and mistakes. But there are so many skeptics to the possibility of these systems even working (to run an internal combustion engine) that we need someone to step up to the plate and show a completed and operating HHO Cell. In all fairness no matter if my system works when completed or not I don't intend on sharing it. I know that sounds a bit backwards from what I'm saying to you but my fear is that someway somehow these things will become illegal as us garage techs. start putting together reliable systems. As for using the gas for welding, cooking, heating etc. that is no myth and I hope people understand that HHO is real it's here and it has a bright future. Good luck to you I wish you nothing but success.
i been sharing for a long time buddy. even have a forum full of sharing
not sure what your issue is?
No issue on a personal level Max. Just saying that we all seem to keep spinning our wheels on this topic but we don't seem to be getting anywhere. I'm not sure you read my entire post because it was in no way an attack, I was actually defending the "cause" and your work. I guess more than anything expressing and understanding the frustration some people feel regarding this technology and how it's being held back. Pointing out the fact that the reason the skeptics are skeptical is because they see thousands of these videos in "pieces" and don't feel a complete system is being represented to make them have faith in the future of the technology. That's it buddy... That's why I wished you success, I know it's easy to be defensive when your passionate about what your doing but please do not assume every comment is a personal attack.
Killer Watts - Z-Grid Tech no worries.......its a lot of work to get all this stuff made and working . more complex then must try to understand. i just keep moving forward. best i can
thanks buddy
If you like listening to a noisy engine and watching bubbles, you can't beat this one. If you're looking for info - not here.
LOL. keep looking then
some of the vid is firing just the one tube set, the 2 beside it function off the flux fields from the one tube set
I will make it work, thanks
its possible , thanks
Are those the same materials listed on the Project Icarus website at Irondmax .com? 'cause if they are, and the rumer turns out to be true, I need to get more info, and start saving for those materials. WOW, I hope those rumers are true. Finally, somebody has got the balls to do it RIGHT. Come on baby light my fire!!!! THANK YOU MAX, AND THE REST OF YOU AT PROJECT ICARUS!!!
most of what is in my videos are listed on the forum, more listed every day
pronta a vitamina !
and then don’t convince me that it doesn’t work!!!
This video proves to me that Stanley Meyer didn't lie!!!
thanks
i hope those freddy stold money from, catch him, and they catch sterling too
LOL
RIGHT, YOU ARE
This is just a link (en.wikipedia.org/wiki/BMW_Hydrogen_7) for those skyptic's that think these experiments are not worth anything! Keep up the experimentation because its useful to keep this open sourced especially for developing countries 2nd and 3rd world countries where fuel is expensive and alternate sources of energy can be a way to step up to a better life.
agreed
no beans were harmed in making this video
since we all dreaming here
I got 1000 percent over faraday
that was a good dream
LOL
you never fail to amaze me david
I see your going to on the smart ass scare crow show.
I bet sterling will put your info right under fast freddys info
when is it gonna happen
Note that you show no gas production with the engine off, Then you start the engine and gas production begins. If this engine is running off the HHO how does it start when there is no gas production.
I bet some oscilloscope action with a half decent microphone, and or some basic audio software, will show some interesting patterns.
Comparing sonograms of the small end of the resonator to an unaffected sound source might show some difference in intensities of compressed frequencies and other surprises. Who knows, I'm new here too.
I think a standard guitar tuner is to blunt an instrument to get any deep data.
Doohickies, I mean it affectionately.
Can a microphone plug in an oscilloscope?
there is no santy clause, no bunny laying eggs either
russ gave up? wow!
what about rohner? he made the original papp engine.........but cant make another, it seems.
LOL
were you expecting 55lpm?
maravilloso
i agree completely
a hostile interview, then the next week a complaint attack from the "FREE ENERGY REPORTERS"
sad
me too
yes its a compression wave......i just made a phone call, my buddy can graph the sound compression and expansion, on his computer, this will be cool. meyer patented a rocket engine fuel, from HHO on demand........he patented everything. car engine and all
the black bird was awesome, leaked fuel on the ground, and not in the air
share the diagram please
I get a lot of that
That's a lot of hydrogen production 😮
not really
he started the buggy in the drive way, thats one
he took the milatary guy for a ride when he road tested it, thats 2
he drove it on the news program, thats 3
each had a different set up.
he had plans to and was working on running the bush master plane, he also had talked to someone about doing it to a large ship.........
so i think your theory is not correct
sorry
Rain water is void of minerals and toxins except in some extreme cases where clouds are seeded with something nefarious.
Ground water has minerals because water leaches by default and also has toxins depending of what is added to it.
And to compensate some chemicals are added many of which act in the same way as baking soda citric acid or some other.
This is my understanding; such as chlorine is very much like baking soda or some other edible acidic electrolyte.
Particles become ionized, they spark to the negative or positive pole depending on the charge in this ionizing process.
A negatively ionized particle with spark to positive and a positively ionized particle will spark to negative.
This process of volume shown is largely superfluous, it really depend on how they are charged and what pole ignites them.
Hence the spark plug or injector is either wired to negative or positive depending on the charge the gas particles are given.
Water or hydro is different to fossil fuels in that way. Fossil fuels will ignite if sparked.
Hydro is magnetically charged or rather it is ionized to explode on contact with the opposite pole it is charge with.
It will jump to complete the circuit by nature when it is ionized in this way and so it needs a pulsing circuit to to induce spark.
Well I am thinking live here after trying to understand all of this. Just to say positive ionized with not spark to positive.
That is a long videooooo but I gotta watch it. I started some months ago with interest in the epg, tried to make it out of a florescent bulb and for some reason the gas busted out the end. Scared me a little. Don't try that, lol.
always wear your safty glasses
why pay for ideas, the real stuff is right here
To me, Stanley's spark-plug "Doohickie" has geometry that reminds me of a super sonic jet engine.
I'd like to wonder about the subject of the devices using HHO, and the production of HHO, and the possibility that we are all looking to find some kind of freedom from the "BIG OIL" template, most of the industrialized world uses as its default mentality.
Is the infernal combustion engine the best design for HHO? Or is it maybe some kind of turbine, combo generator? Or? . . . I sure don't know.
when you see sterling, say the lords name and ask him if he is a demon
idk, i will find out
i bet just a sound program on a computer would do it
Os governos ligado a Roma proibem tal tecnologia...😢😢😢😢
9 years ago? and today? the video shows how harmonics from a square wave can sep water ,try pulling a vacuum on that.
@earfront: how come you conclude I'm trying to disprove Stan's work? I am trying to replicate it, because "they" say it can't be done. It can and Stan proved that in the beginning of the 1980s. What I am trying to explain is why I think the first protype worked and why it it involved electroplished stainless, which also explains why the later prototypes were not succesful.
One question , Why people don;t use kitchen salt instead sodium bicarbonate and other electrolytes ? And are you telling me this device worked that well with just 1.2 Amps under 6 Volts ?
Mars Seeker this is just rain water and tap water, only. the 6 volts controls the alternator fields
irondmax Are you 100% sure in this ? and it takes 1.2 amps ? I know this here was tap water, i meant people in general use sodium bicarbonate and other electrolytes but not salt. maybe it eats metal .
Mars Seeker czcams.com/video/53jhkOrIquo/video.html
You must have used the vacuum that's for sure
No
@@irondmax lol he psi on his little model for a start
@@sydneyhunt6681 he peed on what?
Btw a Single cell drive is a different from a multiple cell drive unit, Any body that has seriously read his patents would figure out the difference☝️, think why he used a 9 cell demonstration unit? Also the type Hydroxy gas that it produces is also different☝️☝️, his demonstration unit produced only Para-hydroxy gas to show burning of stainless steel wire☝️☝️, while Ortho-hydroxy gas is explosive and suitable for ICE-engine demos👍👍☝️
LOL
rainbows and teddy bears
well i am glad you know your a crack pot. in the mean time.............
HERE BE BUBBLES!
LOL
thats making a lot of gas :)
i will slow down, so i can catch you.
i tried to sell my unit to msd, they said they were not interested, they thought it would frighten people. then the tall whites got a hold of it, in the 1940s. man i regret showing it to them.
here kitty kitty, get back into this sack
The news program fits within the time frame I stated, 1980 - 1985.
The other two I don't know. If you can place them somewhere after 1985 in time, then you have a point.
The car WAS working in 1980 - 1985. That's not the point.
The point is that there is NO EVIDENCE to my knowledge that it ever worked AFTER 1985 or so.
updates?
i stopped making videos
why?
spturks i am on strike............until more people participate, in some way. few people are participating..........too many people just watching.
www.irondmax.com/irondmax/forum/forums/thread-view.asp?tid=257&posts=2&start=1
not everybody has your smarts to build and fabricate these circuits and hardware. i will be first inline to buy a plug n play kit from you!!!
spturks well thank you......ok I just changed my mind. really I am busy, day job and cold weather. there will be more videos when I can. so much to do, and so little time to do it. I will be testing epg stuff soon, and redesigned vic stuff.....soon. also I have something very interesting, I am testing. keep watching buddy, just give me a little more time, and thanks for asking
i see you will be on sterlings radio show again. i guess fast freddy aint the only one that gets to be with sterling. 3 weeks and your on sterling, i mean scarecrow, maybe in 2 weeks freddy is on the show, LOL. i have a kiss for ya, out my butt
scare crow, sterling, r green......its al dansie, LOL dansie around the bush
i have 3 k gen in my shed when the day comes when i can run it of water using low amps i share the info and spread it like wildfire but it cant be done its impossible only stan knows . watch the movie chain reaction get some ideas use a lathe to find the frequency
i saw that movie. and i was a machinist for a long time. it dont quite work that way. yea, when its done, you help spread it.
maybe some day i will leak some more good shit for you to glean
Well, we will see what happens. Time will tell what's BS and what's not. Making lots of bubbles is not the challenge. The challenge is to make the bubbles with just a little bit of externally supplied electricity. Stan got it working between 1981-1985 and after that, the buggy never ran again. How come?
Because in his first prototype he used scrap metal pipes which happened to have been electropolished, that's why.
Apparently, you prefer to find that out the hard way. Fine with me.
Everything work if you get the power supply excitation rigged up correctly otherwise it's a fluke, and then you speak of 'conditioning' the electrode surface like Aaron and Ravi Raju did way back in 2007.
well think about this, we have pictures of meyers electrodes, they aint shiny mirror finish, they are dull silver. and i aint pulling info out of a magic hat, i did the work, this video is years old already. all that talk about mirror polish and freezing the tubes and all that is shit. meyer himself clearly said, 304 stainless. the picture evidence in no way supports mirror polished tubes. this yank has already done the work and continues to do the work, and posted video of the work
If the inside of my trumpet was shinny or slightly dull, it would make no difference to the geometry of the resonant cavity resulting in the sound, maybe a very discerning ear could detect a warmer tone from the dull finished trumpet, but that's not the point.
Look at the geometry of the SR-71 Blackbird's engine, (coolest plane ever) how it directs the air flow, kind of like the design of those little Doohickies all this tit for tatting seems to be about.
Everything resonates at some frequency
Not quite David. Make a lot of Gold, and give it to a lot of people. Make a whole lot more, and give it to every person, and suddenly, ...the value is greatly diminished. Make a lot of bubbles, and give it to alot of people. Make a whole lot more, and give it to every person, and suddenly, ...we are free of oppression, suppression, repression, depression, and the earth can become golden once again. So David, go down to the sea, make some gold, give it to the Bubblers, and earn the highest prize
Yeah, yeah, yeah. I understand. You Yanks like to shoot first and ask questions later.
We Dutch like to think before we do. Saves a lot of sweat.
But nuff said. Let's get to work.
i am sorry you missed the tall white story, i was sure you would understand it, next time i will dumb it down for ya. aliens...........1940s....... cat out of bag.........shit david! i thought you would get it. i guess i gave you more credit then i should have
today I figured out how flying saucers engines work. searl has it wrong, it don't work that way. I know now how to do it, and your wrong about it too. I figured it out. if I get bored, I will build one
Insect wings
Vibrational resonance
Is this right? I can spend $1200 to go to the Colorado Energy Conference to possibly see what your showing me right now, here for free? And, are the rumers true?next Spring there's going to be an Educational Exhibit of the Stan Meyers Technology put on by Project Icarus where I get to actually learn, and build one of these, and the admission to the Exhibit and the classes r going to be FREE! ...Hmm, $1200 to see the talkitalks, or save up the $ for materials, and then take the classes for Free.
i can barely afford to go to work
sucks
even now we have the tech to use solar and hydrogen to run our cars we have, a small conversion..........change is hard when the poor are the ones making the mofications