Supercharger Comparison Aisin AMR500 & Eaton M62
Vložit
- čas přidán 13. 09. 2024
- Supercharger Comparison Aisin AMR500 & Eaton M62
► Tilaa kanavani/Subscribe to my channel: tiny.cc/JoniK
► Tue videoiden tekoa/Support my channel (osta jotakin/buy anything): tiny.cc/Ebay1 (Ebay) (AliExpress)
► Kanavajäsenyys/Channel membership: tiny.cc/jasenyys
► Lahjoitus/Donate: paypal.me/jonik1 (PayPal)
#jonik #car #performance #tuning #diy
Facebook: / suomenautohifiharrastajat / puntodemobuild / team160db
Instagram:
/ jonikallioniemi / puntodemobuild
Ebay:
Eaton M62 ebay.us/5fZJ8E
Aisin AMR500 ebay.us/hDyOEg
The Eaton will make more power but harder to fit and . I think anyway but the 500 it's been getting great results for such a little supercharger on any car under 1.6 am going to do one on my lupo shod be fun lol.
Been looking thru your videos trying to see how much hp the eaton makes over the amr500
Not sure yet 😃
@@JoniK1 we'll see 😀
New supercharher for the Punto?
Cant wait to see your next project . how much difference in weight between AMR500 and M62 Jonik?
M62 is about 2x weight with original aluminium flanges
Molemmat kiinni tai vielä turbo mekaanisen lisäksi yläkierroksille .
Ei varmaa kannata ku Punto alakerta antautuu
Looks a very compact version of m62, from which vehicle is that coming ?
It's from Mercedes Kompressor
@@JoniK1 thank you!
Koskas kiinni puntoon😅🤔👍
jossain vaiheessa :D
Hola! Quiero ponerle el amr 500 a una gmc sonoma 2.2 ¿ me lo recomiendas o mejor busco otras opciones ?
It's a bit too small, I would go with Eaton M62 instead
how are you my friend, greetings I would like to know which supercharger was to your liking what do you recommend the amr500 or the eaton m62 👍
M62 is better for daily or if you have 2l+ engine
@@JoniK1
thanks my friend I will take that information into account for the moment I am using the amr500 in my jetta, but I will look for the m62 to test it greetings and thanks friend
can an engine with 2.0l that has original hp of 200 use the aisin amr500?
I would go with Aisin SC14: ebay.us/8OaSwu
@@JoniK1 I see… Thx u, actually my engine is 3sge beam redtop. There would be no problem with this right?
Nice
Which supercharger is best for a minivan? I have dfsk loadhopper 1.3 😄
I would try this one 😃
@@JoniK1 thank you joni ❤️ I'll get the Eaton! Let me know if you have any other suggestions and tips for me I'd love to do as much as I can to this van lol. Might even turbocharge it later if it's not too much of a hassle 😁
What about a small supercharger for a Peugeot petrol v6 (ES9A)?
That Eaton M62 might work or Aisin SC12/SC14
@@JoniK1 I think fitment location could be an issue ; is the ES9A too high a compression engine for a big blower though?
There shouldn't be a problem if you stay under 0.5bar/7psi
👌
AMR500 is too small for 1.8 engine for 0.4-0.5 boost ?
It should be enough with 16000rpm
tulee itellä halu laittaa ladaan tommonen remmi hässäkkä 👍👍👍
Netissä oli joskus joku tehnyt Ladaan, aika siistin asennuksen . Kotimainen tekijä 1700 koneeseen . Oli joku opinnäytetyö se asennus .
@@artohuttunen4151 okei kyll noita on komeitakin pelejä juupp
@@artohuttunen4151 jos osuu joskus silmiin niin laita linkkiä
@@tube-keijo www.ladakerho.fi/ladaboard/viewtopic.php?f=24&t=30593. Tuolla tais olla se juttuketju . En kahtonu näkyykö kuvia vielä . Ennen jokunen oli . Tuolla muitakin Lada juttuja .
@@artohuttunen4151 juu tänkx