Alpha Moto Motorcycle Vacuum Carburetor Synchronizer Synchronization Carb Sync Gauge Tool
Vložit
- čas přidán 24. 08. 2024
- This kit comes with both 5mm and 6mm adapters, will work with all bike models includes Yamaha which requires 6mm adapters (Honda and Suzuki use 5mm adapters, Kawasaki does not need adapters).
It comes with a mold case for easy storage.
This vacuum gauge set features 4 precision gauges.
Gauge reading: 0-38hg
Each gauge has its own individual damping control and Calibration Control
Gauges are mounted to a heavy metal base intended for bench top use.
Dial Diameter: 2-3/4"
Parts included in the Kit:
Contents:
Bracket x 1PC (304x102x20mm)
2-3/4" Gauge x 4pc, brass fitting:5.5mm
4(ID)x7 (OD)x75CM Rubberhose x4
5.5mm (OD) Valve x 4pc
102mm(M6x1.0) Extension x 2pc
52mm(M6x1.0) Extension x 2pc
52mm(M5x0.8) Extension x 2pc
28mm(M5x0.8) Extension x 2pc
you can purchase the item:
Amazon: www.amazon.com...
Ebay: www.ebay.com/i...
Website: tinyurl.com/y8...
You forgot to adjust the middle screw that balance 1-2 + 3-4 together
Mine were way off when I got them... to the point I can't actually calibrate them other than moving them all to 15. I guess that works? I just subtract 15 from everything?
I had one gauge the same way, ended up having to move the needle with my finger to get it close to zero. Haven't had a chance to see if that works with the synching of the rest or not. Have you had any luck with yours?
@@levimcconkey9229 I actually moved the needle myself with my finger and then calibrated it and actually with my vacuum pump it read exactly as it should. All four were right on 10pounds with the rest I did. Not bad
@@kyle88l Nice....I'll try that later with my hand pump & get them dialed in. Thanks.
Doesn't show anything at all crap
I bought those they are absolute garbage.
Why?
What a lot of nonsense compared with other videos
You must be lots of fun at parties.
@@Hpynos2010 lol
cmon bro