Toyota 20R to 22R Swap - 22R Teardown - 02

Tearing down the 22R in preparation for paint, and new parts.
Swapping out the Toyota 20R, and swapping a Toyota 22R. A brief overview of what is needed to complete this swap, and what my current setup currently looks like.
Follow the build on IG: @77chinook
Links to the parts I used:
Weber 32/36 Carb Kit w/manual choke: amzn.to/32NkzGd
Weber 32/36 Cabr Kit w/ elec. choke: www.lceperform...
Pacesetter Header (20R): amzn.to/2RgL0jq
Exhaust Wrap: amzn.to/2P6SEdC
Affiliate Disclaimer Some of the links maybe affiliate links, which may generate me a sales commission at no additional cost to you if you make a purchase.
Music: [NCS] BEST RAP/HIP HOP BEAT (INSTRUMENTAL) ✓ NO COPYRIGHT
• [NCS] BEST RAP/HIP HOP...

[@jasonmoore5685]

🤟✌️

[@azorianification]

🍻

[@Bawkr]

I like this but would be cool to see a tool sound calm version or version with lower music. Instead of fast forward perhaps b-reels of key points during the video. Full length version in fast forward on a separate video or something. I have a 20r that needs A LOT of work but looks promising to me. I think there was something wrong with the guides on it was well one of the bolts under the cover got ate up. Seems to be a common problem on 20r.

[@azorianification]

Yeah the guides seems to be an issue with most used 20 or 22rs. Especially if they have the plastic guides. Thankfully it’s easy to replace.
As for the video I will be making a long video with just the b roll I recorded 🍻

[@jasonmoore5685]

🤑

[@azorianification]

🍻

[@jasonmoore5685]

How much you want for it

[@jasonmoore5685]

Green

[@azorianification]

Blue!

[@The13thSword]

I don't quite understand why you'd only put in new chain guides, instead of just installing a complete new timing chain set (chain, gears, guides, tensioner) while you have everything apart(?) The complete CLOYES 94148S Set is under $50 on Rock Auto.. If I was going to keep the engine/vehicle for any length of time I'd rather have the peace of mind of knowing the timing set is all good. Just asking.

[@azorianification]

Totally understandable. I should have specified this in the video but the plan wasn't to completely overhaul the engine, but to take care of a few important parts. My original plan with this engine was to take the block, and install the early 20R head. Building a hybrid engine was the ultimate goal with the 20r, and this 22r. So I didn't want to replace anything I couldn't swap over. I was also looking into the possibility of converting it to a dual row chain. Ultimately I'm moving the camper onto another chassis so I won't be using these engines any longer.

[@The13thSword]

@@azorianification Thanks for the clarification, & I completely understand your goals here. Everyone has a right to repair & to do it as they see fit. 👍

[@davidnelson8621]

I am restoring a RV with a 20R engine in it And need to remove the timing cover. Do I have to remove the oil Pan?
To get the timing cover off

[@azorianification]

I’m not 100% sure. I know the oil pan bolts to the bottom of the cover but I’m not sure if the pan can stay when the cover comes off.

[@shanehoward2472]

No loosen some of the next bolts from the front of the engine and you can gain enough clearance to remove the cover

[@jonathanbarker9174]

Could a 21r engine work in on a 5r gearbox

[@azorianification]

W50 transmission?

[@jasonmoore5685]

That's a Phil injection head

[@jasonmoore5685]

5,0

[@azorianification]

5.0L? I wish!

[@jasonmoore5685]

Just put a cam in it

[@azorianification]

RV can? 😁

[@jasonmoore5685]

Make sure you check your U-joints in your drivelines

[@jasonmoore5685]

All new🍀

[@azorianification]

Good idea

[@jasonmoore5685]

22r@

[@azorianification]

🍻