NEW!!! Veto Pro MP2X - How It Differs from my MP1
Vložit
- čas přidán 2. 07. 2024
- Just got the New Veto Pro Pac MP2X which replaces their MP2.
In this video I show you the differences between my existing MP1 and the MP2X. I also put the tools from my MP1 into the MP2X so you can see the space leftover to help you make the decision which size you need.
Here are links to the MP1X and the MP2X. I only recommend you purchase directly from Veto for warranty purposes, but you may find them somewhere else. These are not affiliate links
Veto MP2X - vetopropac.com/mp2x/
Veto Pro MP1X - vetopropac.com/mp1x/
Here is a Video of my MP1 Loadout & Review - • Veto Pro MP1 Tool Pouc...
The following are links to products shown in the video. Links marked (Affiliate Link) are Amazon Affiliate Links for Items in the video. I participate in the Amazon Associates Program and make a small commission if you purchase using this link at no cost to you. Thank you for your Support!
If you would like a link for something else you see in the video... let me know and I will post it here as well.
These are items I normally keep in my MP1 and a link for the MP1 on Amazon since its not available on Veto's Website
Veto Pro MP1 (Amazon Affiliate Link) - amzn.to/3A6tKmw
Knipex 180 Cobras (Amazon Affiliate Link) - amzn.to/3A3SH1A
Vessel Tang Thru Screwdriver Slotted (Amazon Affiliate Link) - amzn.to/45dFHnf
Vessel Tang Thru Screwdriver Phillips (Amazon Affiliate Link) - amzn.to/3rE8vHW
Malco 1/4 & 5/16 (Amazon Affiliate Link) - amzn.to/41EJCZ7
Sharpie Pro Markers (Amazon Affiliate Link) - amzn.to/3A6RFCc
Fluke NCV (Amazon Affiliate Link) - amzn.to/3KHFi4w
Knipex 150 Pliers Wrench (Amazon Affiliate Link) - amzn.to/3MQbt4r
Hultafors Pencil (Amazon Affiliate Link) - amzn.to/40fMGJW
Railer Bit Rail (Amazon Affiliate Link) - amzn.to/41EKexT
Knipex Angled Diagonals (Amazon Affiliate Link) - amzn.to/3A6RGpO
Vessel Tang Thru Screwdriver (Amazon Affiliate Link) - amzn.to/3mLyHxJ
Dewalt Bit Holder (Amazon Affiliate Link) - amzn.to/3A8t6Vi
Knipex Forged Wire Strippers (Amazon Affiliate Link) - amzn.to/3mDUY0s
Nohlster Clip (Amazon Affiliate Link) - amzn.to/45hDcjZ
#electrical #hvac #plumbing #carpentry #toolreview #toolpouch #toolbag #knipex #kleintools #vessel #fluke #hultafors #milwaukee - Jak na to + styl
I’m definitely getting one. Thanks for the comparison!
You are welcome… I’ve been wanting one for awhile 👍
Got mine today. Loved having it while changing outlets to today. This review helped! 👍
👍👍 glad it helped. They are the best pouches I’ve ever used by far.
I really like my MP1. I bought it after watching your video on it.
It’s my go to… I will probably still use it more often just because I like how compact it is, we will see.
Be glad you got one in case they aren’t making them anymore 👍
It look awesome
I like it, I was supposed to get it Monday but it was lost in the mail… and sold out. I was going to be mad if I didn’t get it 😂
Looks nice !
I said your last name wrong 😂… I was trying to picture it in my head and Frye is what I was seeing 🤷♂️
@@MORGANSMaintenance I enjoy your posts/ Reviews , only difference between us ; I tend to make my own small pouches , as I’m a pretty good Leather bender , my stuff is mostly wet molded to the specific tools . Our taste in tools / test gear is mostly the same !
@@chrisfyfe9212 I always appreciate your comments 👍
I put the holstery magnet in the very front to hold screws of what im working on. Loving the higher sitting mp2x so far myself.
I’ve done that to hold an extra tool before.. but good idea on fasteners 👍👍
Interesting comparison, they are an expensive item to have sat around though waiting for the right day and job. I see they have brought out some new meter bags that I am very tempted to buy.
I use my MP1 almost every day… I will use this one probably less, but it will also be the backup for if my snap does kick the bucket one day… since I probably won’t be able to get either when I need one. They are always sold out.
I also will probably go with this one when I use a impact since it will weight more on f the clip is better. Maybe prolong the life of my MP1 snap..
These are all the justifications in my head 😂😂
Yeah that MB5 looks pretty interesting… I saw that on Koolin with Krauss the other day.
Nice set-up ... Veto does it again Thx
Just taking out money 😂😂
That looks like a really nice pouch. Use the Toughbuilt pouches myself and love those. Mainly due to the easy clip on clip off feature they have. But these veto pouches look very sturdy and have a nice layout of pockets. Don’t think you can go to wrong with either of those brands.
I came real close to getting into the ToughBuilt, but I started getting my Veto bags right before my Local Lowes started really carrying them in store to see in person.
They are nice bags, especially for the price they are hard to beat.
@@MORGANSMaintenance for me they are perfect. My day changes so being able to clip on an other pouch or swap them out with one single click is really good. But I have one I just always. The electrician pouch. That’s my go to every day load out pouch. But it’s nice to be able to ad a drill pouch or a bigger fasteners pouch on my other hip. But at that point I’ll put them on my toughbuilt belt with suspenders and wear it as a actual tool belt. But that don’t happen often. Mostly if I’m running a bunch of conduite or something like that. To my it’s like Packout for on my person very easy to modify the setup and layout lol.
@robholland5925 yeah my days switch a lot like you. Being able to easily swap stuff is nice
i myself use the toughbuilt pouches for the fact there affordable and easy to clip on and off, one of my co-workers uses an mp1 that he modified the belt clip with a toughbuilt belt clip, i later on bought an mp1 and did the same thing.
@@fishingwitheddie1535 I’ve seen that done in videos who knows might try it at some point but so far happy with my pouches.
I think the TP3 does perfectly fine for me. It’s on the Klein belt always.
That is a good pouch too. I gave mine to a friend to use 👍
@@MORGANSMaintenance what are your overall thoughts on the clip for longevity vs the Joey pouch?
@@Jesus_Strong the clip on this MP2X seems pretty stout. Time will only tell. It’s mounted to the pouch with fasteners somehow, so those could fail, but I doubt it. They are smaller pouches so hard to overload.
First impression, it’s clip is a little more substantial than the Joey Pouch Clips and I haven’t had any issues with the older plastic, or newer metal ones on those either. I do like the newer Joey Pro bag better than the original so far… mainly for the bag, not the clip
@@MORGANSMaintenance ok, I may just have to get them all lol.
@@Jesus_Strong that’s what I’d do 😂.
I normally use my Joey Pouches for fasteners and materials, but they do work well as a just throw some tools in there too… or tools that don’t typically fit in pouches.
It’s just a shame they are all so expensive.
😎⚒️😎⚒️😎
My man 👍👍
I use my mp1 wirh the pocket tongue in my front pocket and the button belt strap on at the same time. Its extra stable doesn't move a bit.
Wondering if you can also do this with the clip/pocket tongue on the mp2x or the size doesnt match up.
It probably matters what pants you are wearing…
But the MP1 is 4-1/2” from what would be the top of your belt to the two rivets at the top of the pocket tongue …. The MP2x is 3” difference. The the tongue may or may not make it as far into your pocket as the MP1.
Hope that makes sense.
i just got my mp1x it’s so stiff tho and i kinda wish i got a mp2x
Yeah they loosen up over time.. or at least my MP1 did. Mines a little stiff too.
@ 2:04 showing how the bags ride: Maybe if you were to get a stiffer belt like a gun belt, the bags wouldn't pull your belt down as much.
The pants I was wearing didn’t have many loops… so there was a big span for my belt to drop.
You are right though, a stiffer belt helps with pouches 👍
Where’d you get that clip for your m12 impact driver ???
You can get on Amazon or their website (it’s a Nohlster) amzn.to/3w2LzEi
I also use a drill pin on my newer M12 by Spider, not sure which one I have in this video amzn.to/3xyOtRM
The pins don’t fit the older ones though.
A small short hammer perhaps!👍👍👍
👍👍. Might be hard to find a place to keep it on this, but you could maybe clip a hammer holder on the tape measure clip
@@MORGANSMaintenance Not available on Amazon 😥
@@gearstuffs8007 no, not yet.
Can you comfortably fit a knipex 250mm cobra or better 250 pliers wrench and 250 cobra?
A 250 Cobra will fit in the biggest slot… the pliers wrench is a little big… and really only room for one.
Hope that helps 👍
Do you think the MP1X is worth the upgrade if I already have the MP1? Is there a weight difference for you new MP2X to your MP1 bag only no tools? With the new clip does it feel secure being on your belt? Great video.
The clip seemed super secure… I probably won’t buy the MP1X, but my MP1 has been working flawlessly… no button issues. That and my arms are longer, so I don’t mind the lower fit.
I feel the weight is pretty similar empty.
Hope that helps.
@@MORGANSMaintenance my MP1 is going strong. I like the look of the newer one but I was just curious if it was worth it to upgrade. I try and keep mine as lite as possible. Most of my service calls I can get it done with it. I’ll keep that MP2X in mind. A little extra space never hurts but I definitely don’t want to be weighed down. Great stuff you got going on. I need to pick up that impact belt clip. It looks pretty neat. Thanks again for getting back to me.
@@ARod1108 👍👍
@AdamInked some people have had issues with the Nohlster on their Gen 2 M12 and Surge being loose. Mine never comes loose, but it may be because of the boot making it fit tighter.
I haven’t heard anyone having problems with anything newer than that, but just a heads up. Not sure what model impacts you are running.
@@MORGANSMaintenance I use the M12 Surge. I love that impact. I do have a boot for it. I took it off so I could tell the difference between mine and my coworkers. I’ll still try it. It looks really nice.
Could you please tell me what's that replacement clip on impactor called and where do you get it ? Thanks
It’s called Nohlster
I have a video for it here -
czcams.com/video/I0FtsAYI3XU/video.html
You can get it on Amazon amzn.to/3QYxijT
Or their own website.
@@MORGANSMaintenance
Thank you.
@@valm7247 👍
I really hope this isn't replacing the original MP1/2...
For my use? Or Veto on the shelves?
For me, I use them both… For Veto I think it is replacing them.
For Veto on the shelves. I HATE metal belt clips: I snag them on everything, and they bend, and then they're never going back to original. And if it happens after 5 years, I'm out of luck. My MP2 belt loop snap gave up the ghost, but I sewed the flap shut and it's better than new. But the Mp2 is a bit big for some jobs. I was looking at an MP1 but not if it has a metal clip. Guess I'm just gonna have to get a TP1, which are...spend, to say the least...
@KiltPatrick you used to be able to get the older style on Amazon and eBay, but I just checked and didn’t see any.
I think they swapped because so many peoples buttons were breaking. Mine has held up great… but I had heard that from several people.
Where did you get the boot for the surge?
It’s the boot for the regular impact the same generation of the surge. It fits.
I got mine through Home Depot, but they are harder to find now that they have newer generations of the impact and quit making them
@@MORGANSMaintenance thanks for the fast reply! That information alone was helpful enough! And love the videos man keep them up I watch on my spare time
@@FernandoGonzalez-ux8cs 👍👍. Glad to help… appreciate you watching
I like my mp1 but I haven’t been wearing it because it bothers my hip. Not sure if anyone else has the same issue or any tips
It doesn’t cause me any issues… so far anyways.
It’s causes me issues at times but usually i can slide it along my belt and find a more comfortable position. I’ve heard from some others with the same problem and some of them have said to straighten the clip with a pair of pliers for a more comfortable fit. Haven’t tried it on my own but it’s always worth to try it first a last resort
I prefer just throwing everything into a Joey pouch rather having to put things back into it’s designated pocket
I do that sometimes… just depends on what I’m doing. Mostly for electrical work where I have an order of using tools, I like having designated spots so I’m not digging.
But the Joey Pouch works good 👍
Veto seems to have supply issues,,,that mp2 has my attention,,,thanks for the demo…..luv your channel….
@@michaelthompson7570 yeah, I have noticed they seem to be out of stock on a lot of things…. And usually for a long time.
Appreciate it 👍👍
I use the mp2x for tools, and my joey pouch for my clamp meter.
Joey has a V2 out now as well
First
You did it 😂 👍👍