Video není dostupné.
Omlouváme se.
DIY Powder coating booth with Eastwood gun
Vložit
- čas přidán 19. 08. 2024
- Yes, a powder coating booth can even be made out of a cardboard box - very little needed to get good results. Talk about some pretty basic principles of the build and setup for doing your own powder coating. Will also post a few videos in the next few weeks about using the booth, and going over setup of the Eastwood gun, the filter used and results. Will link them below when ready.
As a lefty and dyi guy - love the set up. As far as the smoker - I assume it’s an electric one with the heating element on the bottom. Cleaver - never would have thought about one of those as my oven. Would like to get a link for the inline water filter/separator
I made a video of the smoker a while back - walkthrough of the modifications. Its not much to look at, but works like a charm. czcams.com/video/A4ysa6BHj9w/video.html
Need to make another video on the gun setup, the filter is a pretty basic separator a.co/d/eNs2btL
And the gauge is a little more expensive but I specifically bought it to better fine tune the pressure, the range is lower, only up to 30 PSI a.co/d/b8TCtHN
Curious what model compressor you use for SB? I had planned to buy a 60 gal compressor. Would prefer a smaller one.
A Husky 2 stage 30gal C304H. It really all depends on what and how often you are using it for. I trolled facebook for a while and all the pro guys tout the biggest you can get. For me, this works great. I can run it for quite a while before I stop to let it cool down. Maybe 30+ minutes. It pretty steadily up with my 1/4 inch line and fine tip in the blaster. I'm doing maybe 3-5 bracket sized items at a time and its perfectly fine for that. Doing a video on the compressor is next on my list. The two stage as I understand it also is quieter and more efficient. I was concerned about noise, being in an enclosed garage bit it doesnt bother me at all, barely audible in the house. For DIY, its a good fit.
@@steve80TBG Wow! Thanks for that info!! I'm a DIY tinkerer and really don't think that I need a 60 gal compressor. I'm going to give it a try. I'll subscribe to see the compressor topic.