Video není dostupné.
Omlouváme se.

Volvo S60/V70 Door noise fix

Sdílet
Vložit
  • čas přidán 31. 05. 2021

Komentáře • 11

  • @vaskys286
    @vaskys286 Před 6 měsíci

    Had the same problem , found your video and fixed it my self , and problem solved thank you my g

  • @spasticmonkey78
    @spasticmonkey78 Před 2 lety +2

    Exactly the problem on mine , thanks mate !

  • @Handle423
    @Handle423 Před rokem +1

    I'll have to check if that's the same problem I have when my speakers are turned up

  • @VidiSLTU
    @VidiSLTU Před 8 měsíci

    Same problem.. i will try this method 🙂

  • @harryp.6847
    @harryp.6847 Před rokem +1

    I have the very similar noise in my 2016 xc90. Can’t be sure if the source for the noise is the same. Does anyone else have it?

    • @martin_E79
      @martin_E79 Před rokem

      I have it on my XC60. Still haven't fixed it but I will remove my door panel in a few days and check.

  • @robertofranco7889
    @robertofranco7889 Před rokem

    Did you use the same clips? Or did you use new ones? Because I have heard that those clips are one time use, so I'm worried to quit the panel and then not be able to put it back 😂

    • @modass60
      @modass60  Před rokem

      Yes, I used same clips, they are reusable. You just need to push in center pin, but not too far, otherwise it falls out and you won't find it. For reusing just remove center pin, push the clip into the panel and using small hammer put the center pin back into clip

    • @Jeroen74
      @Jeroen74 Před rokem

      @@modass60 If it's a 2005 or later model, you can actually just push the pins all the way in, just remove the whole clip including the black tube that goes into the doorframe. The black tube is completely closed so the pin won't drop into the door :) To reinstall, remove the clip from the little tube and catch the pin. It's easier to install the tube first, then the clip, then the pin.

  • @scottm5425
    @scottm5425 Před 9 měsíci

    oh so that's what it is... thanks

  • @paulcoverdale3281
    @paulcoverdale3281 Před rokem

    Good video, please can you tell me what size rivets were used, thank you.