perfect timing on this video. I'm doing rust repair on an old 914 and have been thinking about getting one of those types of sanders. Thanks for the "heads up"
I just picked one of these up from the pawnshop the other day and I work with wood and man. That thing works great. The one I got seems to use a lot of air but I have a small air compressor so maybe that’s the reason it keeps kicking it on
Some manufacturer make a 3/4" x21" version that has a bigger air motor. Works really good like the 1)2" version you showed. They are a real useful tool for hard to reach areas.
Hey guys. To save yourselves some money on belts, just buy either a 3 or 3&1/2" wide belt in whatever length belt that matches your sander and then just cut it to the proper width that is needed. Alot cheaper that way.
Nice sander. I know u like quality abrasives. The 3M Cubitron II belts are very good but CAUTION about the 36 grit. Maybe I got a bad box but I find the 36 grit comes off the belt too easily. I think it can't handle that real tight radius at the end of the sander. The 60 grit wears properly and removes metal fast too
I picked mine up for $40 and I went to Home Depot and bought some 3 x 18 belts for a bigger belt sander and I just cut strips and use it and it worked great
Definitely a useful tool in the body shop I’ve used the 3m version for a while now ,not only good for dressing welds I also use it to remove spot welds way faster than a drill they also make a smaller version
I want a little belt sander. But I don’t like using air in my current situation. So I seen you can get them that attach on grinders. Then saw a guy make his own DIY on CZcams. So think that will be another little side project when I have time. But that is easy to change.
That Baxter is an awesome tool! So is their geared sander and the inline sander going to buy a second inline cause I like it so much and then I'll have two setup with different grits.
almost like a real tool that was the original ,right down to the II model belt dimensions that you could not read I have been using in sheet metal stainless for decades
I hit the subscription button . Thanks for the video. I think you can get these new at harbor freight for $90 , even cheaper if you find it on sale. I don’t think they carry the more abrasive sanding belts though. Thanks 🙏
Outlaw, you're doing some bad pricing information. Currently on Amazon that sander is 138 dollars. On eBay it's 80 dollars plus shipping. You said it was like 40 dollars! Dude, Shamon! Update! 80 dollars on eBay AND free shipping.
This may be a stupid question but how do you think this would work for cleaning the inside of a trailer hitch receiver? My problem is that the inside rusted a bit on me causing it that my ball & mount doesn't go in all the way and I am looking for a way to clean it out nicely. Also, I can't find a measurement on the thickness of the "blade" part of it that the sanding belt is on, my receiver is 2" square, will this fit inside of it? TYVM for your time and for the video.
@@OutlawEdge AWESOME, TYVM for the fast reply, I have been racking my brain trying to find or think of a way to grind or sand down the inside that has rusted and swelled slightly causing my hitch to not go in. this will save me from having to purchase and install a whole new receiver
@@OutlawEdge so, I did in fact go and buy that exact sander that you did a review on and OMG, it cleaned the inside of that receiver in no time at all. I did however use a cheap endoscope to look inside of the receiver to get more of a closeup where I had to clean out. Took about a half an out and I was done. Thanks again, greatly appreciated.
That’s so awesome I’m glad it worked. That is a really really good tool for doing stuff like that. A buddy of mine actually told me about it and when I picked it up and tried it out for the first time I fell in love with it and now it’s one of my most used tools in the shop. Thanks again for all your support on my channel and the nice comments it means a lot. Hope you had a good Fourth of July stay safe. Arco
@@klippies67 just put two or three drops of air tool oil in the air fitting then plug in the sander and use it. Thats how u oil that tool. Hope this helps bro. Thanks! 🙏 ARCO
perfect timing on this video. I'm doing rust repair on an old 914 and have been thinking about getting one of those types of sanders. Thanks for the "heads up"
I just picked one of these up from the pawnshop the other day and I work with wood and man. That thing works great. The one I got seems to use a lot of air but I have a small air compressor so maybe that’s the reason it keeps kicking it on
Some manufacturer make a 3/4" x21" version that has a bigger air motor. Works really good like the 1)2" version you showed. They are a real useful tool for hard to reach areas.
Heidi, you crack me up! Your closeup focused just fine. That's a sweet sander!
I have had so many people recently tell me I need one of these, thanks for the review!
Man I just got this awhile back. Not sure how i lived without it 😊👍
Hey guys.
To save yourselves some money on belts, just buy either a 3 or 3&1/2" wide belt in whatever length belt that matches your sander and then just cut it to the proper width that is needed. Alot cheaper that way.
Nice sander. I know u like quality abrasives. The 3M Cubitron II belts are very good but CAUTION about the 36 grit. Maybe I got a bad box but I find the 36 grit comes off the belt too easily. I think it can't handle that real tight radius at the end of the sander. The 60 grit wears properly and removes metal fast too
I picked mine up for $40 and I went to Home Depot and bought some 3 x 18 belts for a bigger belt sander and I just cut strips and use it and it worked great
That’s a great idea!!! 👍
Ith tho Quuuiieeet! I want to get one, I will need one, when I do the go kart body, and the honda, when I get too em!
Definitely a useful tool in the body shop I’ve used the 3m version for a while now ,not only good for dressing welds I also use it to remove spot welds way faster than a drill they also make a smaller version
That Lock is like the one I got on my "MultiTool" grinder attachment.... I love that thing!!
I got one of them suckers, how did I miss this video, the quality of that from Horror Freight is pretty good... cool video
Awesome brother, that looks badass 😎👌👏💪👍
I’d buy one today if I could get one in the UK.
I have always wanted one of those little belt Sanders . It looks good and easy to use
I have one from harbor freight I got about 2 years ago. Still works but not as good as the one you have.
I want a little belt sander. But I don’t like using air in my current situation. So I seen you can get them that attach on grinders. Then saw a guy make his own DIY on CZcams. So think that will be another little side project when I have time. But that is easy to change.
That Baxter is an awesome tool! So is their geared sander and the inline sander going to buy a second inline cause I like it so much and then I'll have two setup with different grits.
It’s $80 now. But I’ll definitely save up for it! Slick belt changing!
awesome tool I use mine all the time for tight spaces, dont buy cheap belts though as the literally last seconds
almost like a real tool that was the original ,right down to the II model belt dimensions that you could not read I have been using in sheet metal
stainless for decades
I hit the subscription button . Thanks for the video. I think you can get these new at harbor freight for $90 , even cheaper if you find it on sale. I don’t think they carry the more abrasive sanding belts though. Thanks 🙏
I was just telling the old lady I need one of those yesterday!!
The best tool to remove spot weld my learn in ford company
I love buying new toys 😂
I like that brand. I have their air block sander. Really nice
Good deal bro. Horbor fright sells them for 84 bucks.
I think one of these would be good for touching up lawn mower blades without having to remove them.
I need a pair of gloves that don't melt when grinding. I just ruined 2 pairs...
I like miller’s welding gloves. Their tig/mig gloves have great sewing at the fingers so you don’t lose all your dexterity. 35 a pair if i remember
@@paintham9430 I appreciate that. I usually have mechanic style gloves on. But I know I should wear better gloves.
That seems like a good quality tool. Not like harbor freight lol!
Baxter is Harbor Freight
I just found an ASTRO brand one on Amazon for $83 or something. Looks like it has the same mechanism to replace belts
Good 👍👍👍
Lol work sharp. I had to make it about knives because I got a new one today and one on the way hehehehe!!!
Where is Wayne Reynolds???😂😂😂
#WhoIsWayneReynolds?
#WhoIsWayneReyonds
#Who Is Wayne Reyonlds.
Spelled that right..🤫🤫
@@kellyjones334 that's how people lo e spell it, but we Really don't know
Outlaw, you're doing some bad pricing information. Currently on Amazon that sander is 138 dollars. On eBay it's 80 dollars plus shipping. You said it was like 40 dollars! Dude, Shamon!
Update! 80 dollars on eBay AND free shipping.
One year ago when i did this video they were dirt cheap. U can thank covid for everything getting jacked up.
@@OutlawEdge Edge, you earned a subscription today!
Very good tool !! ))
Just bought one today. I had to pay 119.00$
Harbor frieght 60 bucks all day
Almost looks like a work sharp.
This may be a stupid question but how do you think this would work for cleaning the inside of a trailer hitch receiver? My problem is that the inside rusted a bit on me causing it that my ball & mount doesn't go in all the way and I am looking for a way to clean it out nicely. Also, I can't find a measurement on the thickness of the "blade" part of it that the sanding belt is on, my receiver is 2" square, will this fit inside of it? TYVM for your time and for the video.
That would work awesome for the inside of a trailer hitch 👍👍👍
@@OutlawEdge AWESOME, TYVM for the fast reply, I have been racking my brain trying to find or think of a way to grind or sand down the inside that has rusted and swelled slightly causing my hitch to not go in. this will save me from having to purchase and install a whole new receiver
@@OutlawEdge so, I did in fact go and buy that exact sander that you did a review on and OMG, it cleaned the inside of that receiver in no time at all. I did however use a cheap endoscope to look inside of the receiver to get more of a closeup where I had to clean out. Took about a half an out and I was done. Thanks again, greatly appreciated.
That’s so awesome I’m glad it worked. That is a really really good tool for doing stuff like that. A buddy of mine actually told me about it and when I picked it up and tried it out for the first time I fell in love with it and now it’s one of my most used tools in the shop. Thanks again for all your support on my channel and the nice comments it means a lot. Hope you had a good Fourth of July stay safe. Arco
Have one!👍
So, I need help with lubrication. The pamphlet makes no sense...
@@klippies67 just put two or three drops of air tool oil in the air fitting then plug in the sander and use it. Thats how u oil that tool. Hope this helps bro. Thanks! 🙏
ARCO
I am late as hell
Me too!
👍👍👍
Kisses Outlaw.
Slow medium fast thats called a built in regulator
What material is the bet made of ? Good for metal?
The belt is perfect for metal. That’s what I mostly use it on. 👍
43rd!
🦅🌲Thank you for sharing your videos today🌲🦌
👍🦅
Cool tool...
What size gloves you wear?
Extra large
@@OutlawEdge Copy.
How loud is it? 😂
Honestly its pretty loud. It has a high pitch whine. But its been a great tool. 👍 thanks for watching! ARCO
$164 AU ebay or $120 ebay U.S.A
Real mechanics don't wear gloves