thanks for the info! I'm interested in this tank with all the accessories in the video. However, on the site, there's so many options I'm not really sure which link to click
@@twistedimages405 Thanks! I tried to call a couple times today. Mailbox Full. Sending an Email but its slightly complicated. Curious on some dump valve questions
@@ZAY________ winter storm knocked our power out all day, but we’ll be back at it in the morning! Definitely give a call back and I’ll help get you sorted out
If you have a spare port on your tank, we have a Shraeder valve fitting that can be added to manually fill it if your compressor ever fails. www.twistedimages.com/Shrader-Valve--14-Male-NPT_p_499.html If you don’t have a spare port, a tee can be added to one of the feed lines instead to install the valve.
Which is the Correct bags for hatch back vehicle. Hyundai i20 asta 2015 model. And im from india. I need a low budget air system. Only needed 1. two paddle valve, one for front and one for back 2. 4 air bags 3. Plumbing lines 4. 5 gallon tank and compressor 5. Relay How much its will cost. I dont know how to choose corect bag for the car. Pls reply.
I’m not familiar with the i20 Asta- I don’t think we got those over here in the US. Get in touch with me through our website (twistedimages.com) and I can work with you to get some measurements from the car!
We have used brass on aluminum for years and never seen a problem. I’m guessing corrosion is more likely when you have water (or other fluids) present to accelerate the interaction.
On the tank? I’ve never had one cut open, but I’m guessing it’s around 12 gauge material. You can dent it if you whack it, but you can also lean on it without it deforming.
There aren’t many books out there for air suspension specifically, but the diagram we have makes it as easy as possible! Send a message my way and I can email you what we have
Can i use the same line for the pressure switch and the water trap going to the manifold?
thanks for the info! I'm interested in this tank with all the accessories in the video. However, on the site, there's so many options I'm not really sure which link to click
Here’s a link to the same management kit we have in this video:
bit.ly/3Hi17Vp
If you have any questions feel free to send a message my way!
@@twistedimages405 Thanks! I tried to call a couple times today. Mailbox Full. Sending an Email but its slightly complicated. Curious on some dump valve questions
@@ZAY________ winter storm knocked our power out all day, but we’ll be back at it in the morning! Definitely give a call back and I’ll help get you sorted out
whats the adapter fitting actual size
What’s the website you guys have so I could see some parts that are available thanks
www.twistedimages.com - hit me up if you have any questions!
Say if my compressor fails to turn on, can i add an manual air port to the tank?
If you have a spare port on your tank, we have a Shraeder valve fitting that can be added to manually fill it if your compressor ever fails.
www.twistedimages.com/Shrader-Valve--14-Male-NPT_p_499.html
If you don’t have a spare port, a tee can be added to one of the feed lines instead to install the valve.
Which is the Correct bags for hatch back vehicle. Hyundai i20 asta 2015 model. And im from india. I need a low budget air system. Only needed
1. two paddle valve, one for front and one for back
2. 4 air bags
3. Plumbing lines
4. 5 gallon tank and compressor
5. Relay
How much its will cost. I dont know how to choose corect bag for the car. Pls reply.
I’m not familiar with the i20 Asta- I don’t think we got those over here in the US. Get in touch with me through our website (twistedimages.com) and I can work with you to get some measurements from the car!
Thanks i appreciate its ❤
You can use brass fittings on a aluminum tank?
We have used brass on aluminum for years and never seen a problem. I’m guessing corrosion is more likely when you have water (or other fluids) present to accelerate the interaction.
@twistedimages405 OK good to know. Thanks.
What guage is the aluminum?
On the tank? I’ve never had one cut open, but I’m guessing it’s around 12 gauge material. You can dent it if you whack it, but you can also lean on it without it deforming.
🙋♂️ you make it look so easy....
But I'm new at this, and the plumbing and wiring looks a bit confusing to me,
Is there a book for DUMMIES
There aren’t many books out there for air suspension specifically, but the diagram we have makes it as easy as possible! Send a message my way and I can email you what we have