Video není dostupné.
Omlouváme se.
How to change a front shock strut on VOLVO V70 2 (SW) [TUTORIAL AUTODOC]
Vložit
- čas přidán 4. 09. 2019
- How to change a front shock strut on VOLVO V70 2 (SW) 2.0 Estate 11.1999-12.2008 [TUTORIAL AUTODOC]
Shock strut on VOLVO V70 I (LV) (03.1999 - 12.2000) / VOLVO S60 I (07.2000 - 04.2010) / VOLVO S40 I (VS) (07.1995 - 2004) / VOLVO S70 (LS) (11.1996 - 11.2000) / VOLVO C70 I (03.1998 - 10.2005) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce shock strut: MONROE, STARK, KYB, SACHS, RIDEX
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Springs: www.autodoc.co.uk/car-parts/c...
Springs for VOLVO V70 2: www.autodoc.co.uk/car-parts/c...
Shock absorber: www.autodoc.co.uk/car-parts/s...
Shock absorber for VOLVO V70 2: www.autodoc.co.uk/car-parts/s...
Strut mount: www.autodoc.co.uk/car-parts/s...
Strut mount for VOLVO V70 2: www.autodoc.co.uk/car-parts/s...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
All video and pdf tutorials on BMW 330i parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/vo...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ czcams.com/users/AutodocUk?s...
🛠️ The tools you need to replace a front shock strut:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- combination spanner no. 18
- drive socket no. 13
- drive socket no. 18
- drive socket no. 21
- HEX bit no.H6
- wheel impact socket no.19
- ratchet wrench
- torque wrench
- water pump pliers
- tap wrench
- crow bar
- hydraulic strut spring compressor
- hydraulic transmission jack
- wheel chock
- fender cover
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VOLVO car repair tutorial - • VOLVO car repair tutor...
► VOLVO V70 2 car repair tutorial - • VOLVO V70 car repair t...
► How to replace rear anti roll bar link / rear drop link on VOLVO V70 2 (SW) - • How to change rear ant...
► How to replace rear brake pads / rear brake pad set on VOLVO V70 2 (SW) - • How to change rear bra...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
CZcams: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
© 2019 AUTODOC GmbH All rights reserved
Very helpful and professional.
Thank you for sharing your opinion with us.
the amount of WD-40 is unprecedented 🤣
Good 👍👍👍
Shall be 140Nm on the tires.
like my friend
The bolt holes in the spindle for the strut bolts are oval/oblong. Do you push the spindle in and tighten, or leave the spindle outward as in this video?
Unfortunately, we do not have this information.
AUTODOC
@@autodocuk in this video, he pushes in on the rotor and spindle. @7:47 czcams.com/video/9uXFqVmxXXg/video.html
Hello, at 9:53 you use a Torque of 100 Nm, but you have used copper grease on the thread, which gives another friction..Shouldn't you have another torque, because of the grease?
You are right, some moments in the video were missed, but our channel is not educational but is only for informational purposes. We strongly recommend that all replacements be made exclusively by a specialized service.
AUTODOC
Be careful with the torque values !!! The shock absorber in the steering arm bolts (2 big bolts) that were tighten 100Nm have to be 100Nm (first step ) and then on second step 60 degrees (for V70) angle torque. This is a huge miss !!!
Yes, you are absolutely right and we will definitely take this into account in our new videos.
Please elaborate the second step?
Is Angle torque a different tool than the regular torque wrench?
Im in the middle of this job on a V70, first time doing it.
Thanks
красавцы мазать медной смазкой алюминий
In the new videos, we have already fixed a number of problems, we will be glad if you rate the new videos.
it would be better without that crazy music
Why in God s name is he spraying everything
Thank you for your comment! It is sprayed with a special copper grease, it perfectly protects against corrosion and sticking, which will facilitate dismantling during the next replacement. Best Regards, Autodoc Team
Loose the tiresome music and rather talk us thrue,....