Video není dostupné.
Omlouváme se.
Hikvision how to Add NVR to NVR
Vložit
- čas přidán 21. 07. 2021
- Hello my dear Friend, Welcome to TurboHD X CZcams Channel!!!
In this video, I will guide you to add Hikvision NVR to NVR on local network.
Note: This way for firmware V4 above
Please help me realize my dream of 100,000 subscribers!
►Wishing everyone good health, and thank you so so so much!!!
thank you. it's work.
Спасибо большое !
good tutorial
does, the second NVR, have to support the same number of cameras?
May is ask if the main nvr switches off such as power cut will camera will still be live on second nvr or no, if IP cameras are directly connected back of nvr.
I would say no due to the fact the back of the nvr is providing the poe power to those cameras. If the nvr shuts down, no poe power
update: sound works....but no image...I suppose its something that cannot be easily fixed...some incompatibility issue between these two specific nvrs
Hello! How would I make this work using an external ip? I have 2 systems in separate networks that I want to be able to make work with each other.
If I have 2 TVs and a 64Ch how can I put 32 on one 32 on another please let me know that you
Question, If I have a NVR with 8 Ch and other with 8Ch too when I execute the procedure you show in your video, I'll have video of the 16 channels in the principal NVR ? or the maximum channel I could see joining one NVR to another will depend of the principal NVR ?
It doesnt work with my setup. Primary nvr is DS-7608NI-I2 / 8P with 4 cameras connected via POE. Secondary nvr is DS-7604NI-K1 / 4P. I can make a successfull connection from secondary to primary nvr and get the popup to select the channels. I select the first 4 channels and see all these channels with status online in secondary nvr. Everything good sofar. Though no live view from secondary nvr.
Same here, did you find a way to make it work? Thank you.
32 ch NVR + 32ch
NVR with 64 ip camera cam we merge both NVR and live view on one monitor it is possible??
Sir can we add dvr channels. Into nvr
DVR to Nvr?
Hello, Yes, we can. The step by step are the same. but we can only add analog channel to NVR. For IPC channel on DVR can not add to NVR, it’s not support. Thank you so much!
Dvr ko nvr main add kar dia hai leking black screen aa raha hai kya kare pls help
Hi with me the fail over not working when I discount nvr1 all the live view get disconnected until the nvr 1 get live
For new firmware or NVR4.0 interface you can add NVR to NVR the same as add Hikvision IPC into NVR. Thanks a lot!
Hello
How are you ?
This way can i connect 1 ip camera to 5 NVRs
I can add ip camera to 3 NVRs
But i need to connect to 5NVRs
Why would you want to do this???
All but one model of hikvision nvr have a fan and make a lot of noise. E.g. you have a 8 port hikvision nvr that has cameras connected with POE. But you are sitting in your office not near this nvr and you want to remotely have a liveview. You can possibly use ivms 4200 but it is very unstable and requires a computer running. So alternatively you can have the second nvr being the fanless nvr and have it running stable to get a live view on a big screen.
I already experiment NVR to NVR not working
Wrong video
Wrong video
Dr video
No working