so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
Took a couple of tries since the video isn't very clear or explained. The difficult part is the end. You have to pull the last knot to the end till it gets to the string with the two knots you made in the beginning. Once you get there it'll make another knot and you'll be able to slide the first string with the two knots on that last knot you made. A little confused but figured it out. Works very well.
Idk what y’all are on this saved me honestly the rest of the tutorials were to complicated and I have to make 40 valentines bye tomorrow morning thxxxxxxx
OMG THIS IS SO HELPFUL!!! i usually have a hard time wearing my bracelets because i can’t do it myself so I have to ask someone to put it on and also get it off. thank u so much
Guys if you do end up figuring it out, just know that over time, the loop may become too tight to slide on the thread. Especially if it gets wet it's like impossible to adjust it
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the very end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet! I hope this helped y'all
I sow the video Yesterday and I was there is no way this works but I tried just now and I got it in the first try. I love makin braclets and I usually make them with adjustable knots, but i tried something new and I wanted it to be adjustable so this video helped a lot.
Guys it’s that difficult 😂 just try following along even if you think you can’t see- it took me maybe 2 tires and I’m really not the most intelligent person you’ll ever meet 😂💀 Thanks for the tutorial btw!
after lots of tears, frustration, 8 tissue boxes, and a broken ipad screen, i could still never do it
Feel bad for your ipad
Ik this video is just rubbish and the explanation is rubbish
Theres other ways to do it that's much easier
😂💯
Just do the slidable adjustable knot it’s very easy compared to this and convieneent
POV:you can’t even see over the fingers 💀
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
@Sweetie-POP still don't know 😢😂😅😢😢😢
@@ITSS_GENNI mission failed.
@Sweetie-POP nah I found how to do it....
@@ITSS_GENNI good job child.
I think I need a tutorial on the tutorial.
😂🤣😂
Took a couple of tries since the video isn't very clear or explained. The difficult part is the end. You have to pull the last knot to the end till it gets to the string with the two knots you made in the beginning. Once you get there it'll make another knot and you'll be able to slide the first string with the two knots on that last knot you made. A little confused but figured it out. Works very well.
but how do u transfer it
Thank you!! I really needed this 😅
“do what i’m doing” as if her hands aren’t covering the entire screen 💀
Fr
I've watched this a thousand times and still can't do it. 😢
It's very helpful thanks 🙏
Thank you, this Helped a lot.😊
Girl its hard with her crusty hands in the screen
Excellent, practical, valuable, fast, easy, beautiful !!!
This was so helpful thx for making this video
this was actually so easy thanks 🙏🏽
Idk what y’all are on this saved me honestly the rest of the tutorials were to complicated and I have to make 40 valentines bye tomorrow morning thxxxxxxx
OMG THIS IS SO HELPFUL!!! i usually have a hard time wearing my bracelets because i can’t do it myself so I have to ask someone to put it on and also get it off. thank u so much
Yess tyy
Finally someone who understood
omg tysm it works so good!!❤
The video : 😊
The song : 😮💨🏃♂️💨
just make sure at the end, you have all the strings pulled in the same exact direction as she does and it works!!
she just kind of does it upside down
Omg! I luv you sm!! Thank you!!!
Took a couple tries, but works very well! Ty!
Wow😊, thank you that’s actually very helpful
Omg this was so helpful thank you! ❤️
See this is why u should have lots of subs bro you are literally a legend 🔥
THANK YOU SO MUCH! THIS HELPED ALOT❤
Love the song🤗
Guys if you do end up figuring it out, just know that over time, the loop may become too tight to slide on the thread. Especially if it gets wet it's like impossible to adjust it
Yeah that’s happened to me too, but u can just slightly loosen the actually knot like how u would with a normal knot and then it works properly again
@@ThatshortgirlYk thank you!
Thanks for the bid I didn’t know how to make it thanks again 😆
"do what i do"
The song I’m obsessed
THANK YOU! If you are struggling, watch the loop and how she tightens it!
Wow it worked thank you so much🎉🎉
Thanks this really helped
Thank you! This acctually works!!
I have to redo this so many times cause it gets SO TIGHT and it won’t slide after a few days
That helped a bunch!
After all that frustration I finally got it 🤦🏽♀️
This is awesome thank you !
Her:Do what I’m doing
Me:I don’t know what ur doing!💀
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
Wow it works it is very simple i love it thanks. I didn't understand it at first but when i tried it I did it right.
this was so good i understood what you did perfectly thank you so much
THANK YOU
thnkyou soo mych bruhhh thankyouu frrr
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the very end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet! I hope this helped y'all
i broke my bracelet trying to get a knot undone that was created from trying to do this and i still can’t get it
Everything was good until I decided to make an adjustable bracelet 😅😅
Ohhh my goodnessssss... I finnally did it after my 100th tryyy 🎉🎉
It's such a brilliant way to end a bracelet like this
I sow the video Yesterday and I was there is no way this works but I tried just now and I got it in the first try. I love makin braclets and I usually make them with adjustable knots, but i tried something new and I wanted it to be adjustable so this video helped a lot.
It’s actually simple thxxxx
Tysm😊
I never knew how to do it and I lost it at freaking Orlando because it wasn’t on right!!!
Worked on my first try which was amazing but I had to watch the video like 100 times to make sure I got it right
After 100 tons of frustration, I have finally did it
love the song what’s it called ❤😊
Ty ty ty ty tysm new sub u saver my live
i figured it out but it doesn’t slide 😭😭😭
ty🥰
Thank you and I have done it too thank you very much❤❤
Why is everyone complaining😭 it takes some tries to actually understand what's happening.. happens with almost every tutorial
How do you make the loop?
mine keeps locking up
Ty this helped!
the loop tightens if i accidentally pull on both sides and then doesnt move
Somehow I Normally don't get these but I got it first try after watching it 3 times
OMGSH I JUST DID IT THANKS
THAT WAS SO CONFUSING WISH THE VIDEO WAS SLOWER
Guys just put the end in the hoop close the hoop and tie it cut the rest so u only have one string
Instructions unclear my phone is now broken
i got it thanks 👍
Guys it’s that difficult 😂 just try following along even if you think you can’t see- it took me maybe 2 tires and I’m really not the most intelligent person you’ll ever meet 😂💀
Thanks for the tutorial btw!
Life savior
I cured 5 times trying to do this
that was so much easier than i made it out to be 🙃🔫
y’all it’s pretty easy
I did it without struggle 😎💪
I use this technique for fly fishing.
😊👊
Song name?😊
thanks!
I have been looking for a way to do this, no video helped but yours. THANK YOU now I can make bracelets and actually wear them
How is it work if I can't even see what is she doing 💀
It works! I just got confused
I'mma try this but does it actually work because I'm making a precious gift for my moms birthday
If you do it right it should work
What is that called?
I DID it 🎉 I just put the video speed to be slower so I could see what they were doing😊
I tried to do it but I can't see because of the finger and Can you do it slowly
y’all need step by step written instructions istg
it’s not that hard to understand 😭💀
there's a way way way way way easier way lol
spill
what is it
I know an easier way but I guess this works too
“do what i’m doing”
isn’t a tutorial. hardly anyone can see behind the hands anyways
Love
I did it but it’s not even tight
Full sprint to sub Thank God 4 u and this video watched many and all them confusing and too many dang steps 😂😂 thanx again❤
If y’all can’t tie a simple not stg 😅 did it in 5 minutes with a bracket twice as thick and barely had room to do the end parg
I did it y’all 😭
aftr watching multiple snake knot videos i finly made it but now this irritating 😢
Thano you
Can't even do it😢😢😢
This worked so well!!! Thanks!
i did his so many times yestrday for oders so tank you
how do u find the thread?
I get mine at Michaels or hobby lobby, it’s called “embroidery thread”
HELP I RUINED MY BRACELET
I did it
I can't do itttttttttt
Impossible,I tried doesn’t work
I have no idea what she did I have tried like 100 times
yall it’s a slip knot it’s not that difficult i got it after one watch lmao use your critical thinking skills