Thank you so much. Be sure to check out our site at www.featherbeardesigns.com and please feel free to look us up on Facebook and join our group FeatherBear Bling!! Stay tuned for more new content to come here on CZcams as we are revamping and utilizing it again!
Flawless "how to" video! My 2 rotisserie kits will be here tomorrow and hopefully will be able to have time to make or attempt to make a single turner this weekend after work... then work up the confidence to build multi turner later:) Do u have a video of how to build a single? Thanks for sharing btw!
Amazon has the makings of a 3 cup turner for $16.99. just not the wood to assemble it. Here's what the kit includes: 3 x5-6RPM Turnable synchronous motor 3 x brass material 7mm/0.275in length hexagon motor flexible coupling/1x Allen Wrench/6 x Screws 3PCS X 6ft switch cord 3PCS X Quick connection anti-shock terminal block. I was looking for videos that shows me how I can build one using these.
Yes....So sorry!!! The weather has been so cruddy here and I like to do them outside. Just finished the new video!!! Uploading now!!! Yay! Thank you everyone for your paitience.
UPDATE ON PARTS!!!!! Hello everyone please read this before ordering more parts. I began making the parts to help everyone out. I assumed anyone ordering the parts have already watched ALL of my videos. I am getting a few emails of people wanting help and instructions. I love helping out however if you did not watch the videos then please DO NOT ORDER the parts. You need to be ready and prepared to build it based upon my videos. The videos on the unit are extremely detailed and THEY ARE THE MANUAL on how I built Heathers. Thank you.
Awesome videos and I got my parts yesterday ( YAY !!! so excited) but I have a question :). When you take both arms off the stand..... won't the cogs and the chain fall down on that side due to nothing holding the cogs up .... You can leave one of the arms in to hold it up but can't run the machine, as that part would not be centered since one of the arms is not in... correct? I sure hope I am making sense ...lol.
Sounds like you want to be able to epoxy the cups by holding the arm and be able to take them on and off the turner. right? You must be referring to the modification I did. Watch the modification video. I added a piece of 3/4 inch pvc to each side of the top cogs and then put additional slips on each side so not only can you take the arms on and off but the cogs will stay put. :-)
Heather I got my parts question the pvc that you hold in your hand that you take on and off your turner how long is the PVC ? When u take it on and off is it a lot of work?
Ok so the response to me making certain parts for the turner have been overwhelming. While supplies last I am going to make the top PVC gear/sprockets, the PVC with football on it and the large bottom gear/sprocket that the rotisserie goes into. Please stay tuned for a coming video in the next couple of days showing what parts I will make and how to order. While supplies last I will do each part for only $5 a piece plus shipping - Dan
FeatherBear Designs there will always be "those" people that dislike something, just to be that way. You definitely cannot please everyone, don't let it bother you. Your videos are absolutely fantastic and so very helpful, and very much appreciated! Keep up the great work!
I have noticed that with a lot of videos there are always a few dislikes, and I've often wondered what there is to not like? it's made me wonder if some where someone is paying people to dislike videos.
I really enjoyed your video of the different tumbler creations!
Thank you so much. Be sure to check out our site at www.featherbeardesigns.com and please feel free to look us up on Facebook and join our group FeatherBear Bling!! Stay tuned for more new content to come here on CZcams as we are revamping and utilizing it again!
Very well done! Thanks so much for sharing your design.
you're welcome!!
Flawless "how to" video! My 2 rotisserie kits will be here tomorrow and hopefully will be able to have time to make or attempt to make a single turner this weekend after work... then work up the confidence to build multi turner later:)
Do u have a video of how to build a single? Thanks for sharing btw!
Amazon has the makings of a 3 cup turner for $16.99. just not the wood to assemble it.
Here's what the kit includes:
3 x5-6RPM Turnable synchronous motor
3 x brass material 7mm/0.275in length hexagon motor flexible coupling/1x Allen Wrench/6 x Screws
3PCS X 6ft switch cord
3PCS X Quick connection anti-shock terminal block.
I was looking for videos that shows me how I can build one using these.
Omg Beautiful job love ❤️ ❤️ love
love the video, are you still going to film putting one together from start to finish? can't wait to see it.
Yes....So sorry!!! The weather has been so cruddy here and I like to do them outside. Just finished the new video!!! Uploading now!!! Yay! Thank you everyone for your paitience.
Ok. Awesome. Starting to process of watching all videos. O and work my day job. Haha.
Steve
thanks for making this video!!
Your so welcome. Better stuff yet to come. Just need more subscribers so we can keep this up!
UPDATE ON PARTS!!!!! Hello everyone please read this before ordering
more parts. I began making the parts to help everyone out. I assumed
anyone ordering the parts have already watched ALL of my videos. I am
getting a few emails of people wanting help and instructions. I love
helping out however if you did not watch the videos then please DO NOT
ORDER the parts. You need to be ready and prepared to build it based
upon my videos. The videos on the unit are extremely detailed and THEY
ARE THE MANUAL on how I built Heathers. Thank you.
FeatherBear Designs can I order one from you
How do I contact you to order the parts?
Awesome videos and I got my parts yesterday ( YAY !!! so excited) but I have a question :). When you take both arms off the stand..... won't the cogs and the chain fall down on that side due to nothing holding the cogs up .... You can leave one of the arms in to hold it up but can't run the machine, as that part would not be centered since one of the arms is not in... correct? I sure hope I am making sense ...lol.
Sounds like you want to be able to epoxy the cups by holding the arm and be able to take them on and off the turner. right? You must be referring to the modification I did. Watch the modification video. I added a piece of 3/4 inch pvc to each side of the top cogs and then put additional slips on each side so not only can you take the arms on and off but the cogs will stay put. :-)
Can I order the gears? If so how much? I’m in Michigan. Oh, did you make the whole thing keeping in mind the length of the chain?
I can't wait to try this idea.... great job..and thks for sharing.
Question- this doesn't have to do with this video but have you ever made a photo tumbler
You guys should sell the whole machine
What's a cup turner?
Heather I got my parts question the pvc that you hold in your hand that you take on and off your turner how long is the PVC ? When u take it on and off is it a lot of work?
its 13 inches, and no its the best thing ever, so easy!
Do you have a supply list or do you only sell the parts?
From where I can purchase this tumbler turner?
how much is it to order the whole thing
Do you sell the completed single turners
Are you still making supplies??? I would love your PVC with footballs at the very least!!!
AliCG0079 yep!!
FeatherBear Designs how do I order the footballs?
These tumblers are beautiful and amazing and if they can't see the beauty in them they are stupid af
Sheila Mandra thank you for the kind words
Ok so the response to me making certain parts for the turner have been
overwhelming. While supplies last I am going to make the top PVC
gear/sprockets, the PVC with football on it and the large bottom
gear/sprocket that the rotisserie goes into. Please stay tuned for a
coming video in the next couple of days showing what parts I will make
and how to order. While supplies last I will do each part for only $5 a
piece plus shipping - Dan
FeatherBear Designs do you still sale parts
FeatherBear Designs I was wondering how big the sprockets and chains are?
Do you happen to sell the entire machine?
Jessica Kestner no just the parts to make your own. Check out my parts videos
FeatherBear Designs would you ever consider making the whole thing for customers?
No, sorry. Ive had to turn down A LOT of people on that subject. Just parts only :-)
I was thinking gear and chain vs individual motor
3:50 seconds in and we get to the cups?
Ya your right. Back when we started making videos I kind of talked too much! Ha ha
so weird to have 2 dislikes. I wonder what they didn't like :-(
FeatherBear Designs there will always be "those" people that dislike something, just to be that way. You definitely cannot please everyone, don't let it bother you. Your videos are absolutely fantastic and so very helpful, and very much appreciated! Keep up the great work!
I have noticed that with a lot of videos there are always a few dislikes, and I've often wondered what there is to not like? it's made me wonder if some where someone is paying people to dislike videos.
@@sarahreed8801 Too much excess talking. Just get to the point. If you make a DIY video, people don't want to listen to all the extra chatter
Probably on accident, or even KIDS on parents accounts accidentally hitting buttons! We are for sure guilty of this on occasion.
It's because you're just talking to the camera for the first nearly 4 minutes
I can't find a to do video on it
You just have to spray the photo with a clear coat front and back before you epoxy.
What is yalls email :)
Rebecca Bernard it's at the end of our videos....Featherbeardesigns@gmail.com