Toughbuilt Stacktech low voltage contractor van tour
Vložit
- čas přidán 9. 03. 2024
- Toughbuilt stacktech van tour.
Low voltage contractor van load out. 2500 GMC van. 3 months of daily use and this is our work flow.
#stacktech #toughbuilt #tools #toughbuilt #drawer #system #lowvoltage #vantour #shorttermreview
Stack just makes life easier an more elegant, can't wait to see if the come out with more designs in the future!
A very well thought through setup! Rolling the whole drawer stack into a job site must make things a breeze. Trying to get on that level myself!
Thx for the comment. If you watch my older video I had a Ridgid system that we used. While on a job site, we were switching boxes back and forth, and another team had the Packout drawers and their workflow was so much better than ours. We switched over to packout drawers and started adding accessories to the rails. Then the Ridgid drawers came out and then stacktech… so we’ve been trying all of them. None of the systems are perfect, but we’ve like the workflow with the stacktech the best.
@@donniestoolthoughts9209 Very interesting, I previously had the original Ridgid and liked them except for the clasp mechanism being on the sides. Now using a company provided Craftsman Tradestack and its not bad for the money since the drawers came out. In your experience, how has the Stacktech surpassed the Packout for you? Alternatively I'd be very interested in a video practically comparing the two! Keep up the good work!
Love it! Thanks for showing your van set-up! I could watch Van set-ups all day
Whew. Did this work for over 28 years. Made tons of $$ . One key to that business is being organized as time is money Clients notice the organization and how efficient you are. Well done sir. Plus 1 on the partition, its a must.
You miss it? Thx for the comment!
Not really. I enjoyed the trade. I took pride in my work and wanted my work to stand out. I told myself I was going to " Get off the ladder" when I turn 50 as I didn't want to waste my body all to this line of work. I was offered a full time gig with one of my clients to become a project manager and decided it was a good fit. I really enjoy my new job, but still have all my tools, van, and contacts. I've seen guys in the trade at 60+, nothing wrong with it, I just didn't want my body all broken down from being on my knees and on a ladder. Took a pay cut but the time I have back is just as valuable if not more valuable than money.
Hard to find somebody that pays as much attention to the details these days..
Very slick setup, thanks for sharing!
Thx for the comment!
Great setup! I've been eyeing the stacktech system for my painting company, and this was very helpful.
Great setup! Very organized and professional looking. The drawer slides seem very heavy and sturdy.
Almost heavy duty enough. They’re the 60” slides rates at 500lbs. But the weight was causing them to drag. The support wheels helped take a lot of the weight off the slides. Thx for commenting!
I love how you set up your van, i recently jumped over to the stacktech and I have the 2 and 1 dolly and even a stacktech shelf which i do not recommend due to design limitations (the way they have everything stacked on the pictures cant be done in real life) i have been looking for ideas, but not a lot of people have stacktech yet. Great build!
this is super bad ass, love this shit dude.
Nice setup
Thanks!
Get the dolly that stacks them horizontally. It’s worth it. The problem is finding them in stock.
I’ve got it. But it’s big, bulky, and heavy. Was a pain in the a$$ to assemble and did it mention it’s heavy. Weighs more than my 4’ magliner hand truck. Thx for the comment.
@@donniestoolthoughts9209 Was thinking this as well that’s what I would do with this setup but to each their own!
Please, please put a partition wall in there. Those cleats are not rated for a rear impact, if you get into an accident everything in the rear is going to be where the driver was sitting.
That is a Nice van setup! Having the slide out base so you can grab every box from the back of your van is So smart. Did you make those hold down cleats for the boxes on your slide yourself or does Toughbuilt make them?
This summer toughbuilt is releasing a mounting plate… but, i needed to secure them now! People are 3d printing cleats and selling them on etsy. I have a 3d printer and someone posted the file on the site printables. I printed them myself. Thx for the comment.
@@donniestoolthoughts9209 Nice, thanks for the info!
Thanks for the detailed review of your setup. What about locations that have stairs and no escalator?
99% of our jobs we are able to roll in… really like the handicap regulations. Makes it easier on us. The 1% of jobs with stairs or broken elevators, we go minimalist and use the tool tote and we keep some bags folded flat in the van. We’ll be getting the Stacktech backpacks when they become available.
What are those cleats you use to mount to the slide platform? I started using Stacktech a few weeks ago, and those cleats are pretty slick.
I 3d printed them from a file posted on printables.com. Christopher Medeiros designed them. You can find them already printed on Etsy if you don’t have access to 3d printer. The spacing is the only problem. Get them too close and it pinches the bottom drawer, causing it to not close all the way. Get them too far apart and the back locks won’t stay locked…
Thanks for the great video! Is all of that available at Lowe's?
Only at Lowe’s. But it’s hit or miss at each store. The inventory system is not tracking the stacktech products correctly. A lot has become available to order on lowes.com. Good luck
Do you have the 3d file for the organizers on the drawers? Nice Setup !
I took the Milwaukee 3d file for 3 drawer packout bins and reduced the width to 90%. Works perfectly.
@@donniestoolthoughts9209 Thank You
Did you get rid of your Ridgid boxes and drawers, or are you using them elsewhere?
No, I’ve got them in my other van. I have over 20 of the gen 1 boxes and most of my tools stored in the warehouse are in ridgid boxes. You can’t beat the value to storage ratio of the ridgid boxes. I just finished cutting the bottom out of the 2 drawer setup to make 1 giant drawer. Video coming soon.
How did you mount that cliptech clip to your veto bag? I have an atlas 46 bag that I want to put a clip tech on
Yes, i had the clip tech pouch but it wasn’t doing the job. I cut the rivets and drilled holes in the veto. I didn’t cut the Vito. I went through both pieces of the belt loop that way if I decide to take it off the Vito just has a couple extra holes in it. They’re two styles of the clip Tech if you use the one like I have that you reach underneath and lift up make sure to leave yourself half an inch above the belt For your fingers
Where’d you get those 3 drawer inserts?
I have a 3d printer. Used the 3 drawer boxes somebody designed for the packout 3 drawer. I printed them at 90% of the packout width. Same height and length. I think some people are printing and selling them on Etsy.
Can you show cooling test on the cooler box? How many days can it survive cooling?
I will, I’ve got a Milwaukee, Ridgid, and an Orca roto molded cooler.
@@donniestoolthoughts9209 thanks
Any more info on that slide out drawer?
Here’s a short video about the slide out drawer.
Van sliding shelf for toughbuilt stacktech tool boxes. Thx for watching!
czcams.com/users/shortsc8FhC5kWAh8?feature=share
What made you change from Rigid to Stack Tech ?
I have Rigid boxes ,AEG in Australia and can't decide to buy AEG drawers or go to Stack Tech
one drawer box. It is so handy and speeds up our installs / service calls to be able to grab the tools we need and throw them in the stack. Easy access without having to move boxes back and forth. The drop and lock stacking feature is also nice. For the money, you can’t beat the ridgid /AEG boxes for amount of space to money ratio. I still have a warehouse full of ridgid boxes with tools in them. Toughbuilt looks like they’re in financial trouble… may not be around much longer. If they go away, I’ll come up with a custom ridigid one drawer box.
Ridgid has some nice drawer boxes out now, just got the 2 drawer. Pretty decked out set up Chief 👍
Your 3D printed bins. Did you print or buy?
If you printed, did you design or find the file somewhere?
Nice set up.
I 3d printed them. Someone has released a file for stacktech bins, but i wanted the nesting bins. I printed the packout bins at 90% width and they fit perfect. The cutouts for the dividers even lineup in the bottom of the long bins… lot of copying going on there…
Who is selling the cleats for these boxes right now?
I got mine off of esty